Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
T2000-PL120CN8 Partex self-adhesive marking tape, 12mm x 27metre Cassette, Silver, pack 1
Partex T2000-PL120CN8 is a silver self-adhesive printable marking tape supplied as one 12 mm wide by 27 m long cassette for creating customised equipment, component and electrical installation identification labels.
£120.94
Why Choose the Partex T2000-PL120CN8 Self-Adhesive Marking Tape?
The Partex T2000-PL120CN8 Self-Adhesive Marking Tape is a professional identification and labelling consumable designed for producing customised adhesive labels for electrical, industrial and general equipment marking applications. Supplied as a 12 mm wide × 27 m long cassette in a distinctive silver finish, this marking tape provides a practical solution for creating clear, organised and professional identification labels.
Designed for use with compatible Partex identification printing equipment, the T2000-PL120CN8 combines printable marking tape with a self-adhesive backing, allowing users to create labels featuring equipment references, component identifiers, cable information, panel designations and other essential identification details. The cassette format supports convenient handling and tape dispensing during label production.
The 12 mm tape width offers a practical format for compact identification labels, while the generous 27 m cassette length provides material for multiple marking tasks. The silver colour creates a professional appearance suitable for control panels, electrical cabinets, equipment housings and other compatible surfaces where a metallic-looking identification finish is preferred.
Supplied as a pack of 1 cassette, the Partex T2000-PL120CN8 is suitable for electrical contractors, control panel builders, industrial maintenance teams and equipment manufacturers requiring consistent, customised adhesive identification labels.
Key Advantages
- 12 mm tape width provides a practical format for compact identification labels.
- 27 m cassette length supplies marking material for multiple labelling applications.
- Silver finish provides a distinctive, professional appearance for equipment identification.
- Self-adhesive backing allows printed labels to be applied to suitable surfaces.
- Supports customised equipment, component and electrical installation identification.
- Suitable for printing alphanumeric references using compatible identification equipment.
- Helps improve organisation and traceability in electrical and industrial installations.
- Cassette format provides convenient storage, handling and installation into compatible printers.
- Labels can be produced in lengths appropriate to the required identification information.
- Useful for maintenance, inspection, commissioning and equipment documentation.
Key Features
- Partex T2000-PL120CN8 self-adhesive marking tape.
- Product format: Printable tape cassette.
- Tape width: 12 mm.
- Tape length: 27 m.
- Colour: Silver.
- Pack quantity: 1 cassette.
- Self-adhesive construction for application to compatible surfaces.
- Designed for customised identification and labelling.
- Suitable for equipment references, panel labels and component identification.
- Supports the production of labels in different lengths.
- Intended for use with compatible Partex identification printing equipment.
- Part of the Partex marking and identification consumables range.
Professional Silver Self-Adhesive Tape for Equipment and Component Identification
The Partex T2000-PL120CN8 provides a practical solution for producing customised adhesive identification labels in electrical and industrial environments. Clearly labelled components and equipment help improve installation organisation, support maintenance procedures and make it easier to locate and identify important electrical connections and devices.
The silver marking tape offers a professional-looking finish for applications where a neutral metallic appearance is preferred. It can be useful for identifying control panel components, equipment housings, electrical cabinets and other suitable surfaces requiring clear printed identification.
With a width of 12 mm, the tape is suitable for compact labels containing concise equipment references, component numbers and other identification information. The available printing area should be considered when selecting text size, character quantity and label layout.
The 27 m cassette length provides a useful supply for repeated identification tasks. Users can prepare labels of different lengths according to the required text and the capabilities of the compatible printer, making the product suitable for both individual maintenance labels and larger equipment identification projects.
The self-adhesive backing allows the printed tape to be applied directly to suitable surfaces without separate mechanical fixing. For best results, the application surface should be clean, dry and free from contamination that could interfere with adhesive contact. Adhesion performance will depend on the substrate, surface condition and operating environment.
The cassette format is designed to simplify handling and installation into compatible marking equipment. Before ordering, users should confirm that T2000-PL120CN8 is supported by their specific Partex printer model, as compatibility should not be assumed for every printer in the Partex range.
Where labels will be exposed to chemicals, high temperatures, outdoor weathering or other demanding conditions, the tape's material properties, adhesive performance and environmental suitability should be verified against the manufacturer's technical specifications.
For safety-critical electrical identification, printed labels should comply with the applicable standards and installation requirements. Adhesive marking tape should not replace mandatory warning plates, permanent identification systems or other prescribed safety markings unless its suitability has been established.
Typical Applications
- Electrical control panel identification.
- Industrial equipment and machinery labelling.
- Electrical cabinet and enclosure marking.
- Switchgear and distribution equipment identification.
- Component and device reference labels.
- Automation and control system identification.
- Equipment asset and reference marking.
- Electrical installation and commissioning projects.
- Maintenance, repair and refurbishment labelling.
- Applications requiring silver self-adhesive identification tape in a 12 mm format.
Technical Specifications
Tick the specs you need, then view products that match.
| Pack Quantity | 1 | |
|---|---|---|
| Product Series | Partex ProMark | |
| Device Type | Self-adhesive label | |
| Colour | Silver | |
| Manufacturer | Partex | |
| Manufacturer part number | T2000-PL120CN8 | |
| Product type | Self-adhesive printable marking tape | |
| Product category | Identification and labelling consumables | |
| Product format | Tape cassette | |
| Tape width | 12 mm | |
| Tape length | 27 m | |
| Colour | Silver | |
| Adhesive type | Self-adhesive | |
| Pack quantity | 1 cassette | |
| Total supplied tape length | 27 m | |
| Marking method | Printing using compatible identification equipment | |
| Application method | Apply the printed adhesive label to a suitable prepared surface | |
| Primary function | Equipment, component and installation identification | |
| Typical marking content | Equipment numbers, component references, panel designations and identification text | |
| Typical applications | Electrical panels, industrial equipment and general identification labelling | |
| Brand | Partex | |
| HS Code | 39199080 |
Frequently Asked Questions
What is the Partex T2000-PL120CN8 used for?
The Partex T2000-PL120CN8 is silver self-adhesive marking tape designed for producing customised identification labels. It is suitable for marking electrical equipment, control panel components, machinery and other compatible surfaces using appropriate printing equipment.
What are the dimensions of the Partex T2000-PL120CN8 marking tape?
The tape measures 12 mm wide × 27 m long. Its 12 mm width provides a compact label format, while the 27 m cassette length supplies material for multiple identification tasks.
What colour is the Partex T2000-PL120CN8 tape?
The T2000-PL120CN8 has a silver finish, making it suitable for applications where a professional metallic-looking identification label is preferred.
How many marking tape cassettes are included in one pack?
Each pack contains 1 cassette of Partex T2000-PL120CN8 self-adhesive marking tape, providing a total tape length of 27 m.
Can the Partex T2000-PL120CN8 be used with any Partex printer?
The tape is intended for use with compatible Partex identification printing equipment. Printer compatibility should be confirmed for the specific model before purchase, as not all Partex printers necessarily accept the same tape cassette formats.
Professional Identification and Labelling Solutions from Partex
Partex supplies professional cable marking, equipment identification and labelling products for electrical contractors, control panel builders, industrial maintenance engineers and equipment manufacturers. The T2000-PL120CN8 silver self-adhesive marking tape provides a convenient 12 mm × 27 m cassette for creating customised identification labels that support organised installations, clear component references and efficient maintenance.
