Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Partex PXCW-63L M63 CW outdoor armoured cable gland for steel wire armoured cables with outside diameters of 56.0–65.3 mm, featuring mechanical armour clamping and outer sheath compression sealing for industrial electrical installations.
£32.17
The Partex PXCW-63L is a heavy-duty M63 CW outdoor armoured cable gland designed for the secure termination, mechanical retention and environmental sealing of large steel wire armoured (SWA) electrical cables. Part of the Partex PXCW outdoor cable gland range, it provides a practical cable entry solution for industrial power distribution, electrical switchgear, outdoor control panels and other electrical installations requiring reliable armoured cable termination.
Featuring an M63 metric threaded entry, the PXCW-63L accommodates cables with an overall outside diameter of 56.0–65.3 mm. Its CW gland configuration combines a mechanical armour clamping arrangement with an outer sheath compression seal, helping to secure the cable and protect the enclosure entry against moisture and dust when correctly installed.
The Partex PXCW-63L M63 cable gland is particularly suited to larger SWA power cables used in industrial and outdoor electrical infrastructure. Its armour clamping arrangement supports electrical continuity between the cable armour and the metallic gland body, while the outer sheath seal provides additional environmental protection compared with conventional BW indoor glands.
Steel wire armoured cables are commonly specified for industrial power distribution and outdoor electrical installations because their armour provides additional mechanical protection. However, the cable armour must be terminated correctly at the enclosure entry to maintain a secure installation and, where required, support an effective protective earthing arrangement.
The Partex PXCW-63L CW cable gland addresses these requirements through its mechanical armour clamping system. During installation, the cable armour is prepared and positioned within the gland's clamping components, which secure the armour when the gland is correctly assembled. This provides a defined mechanical termination at the enclosure entry.
The gland also incorporates an outer sheath compression seal. This helps limit the passage of moisture and dust around the cable where it enters the enclosure. The protection achieved by the completed installation depends on correct gland selection, cable compatibility, fitting procedures and the sealing arrangement between the gland and enclosure.
For cables with an overall diameter of 56.0–65.3 mm, the PXCW-63L provides a suitable size option within the Partex CW range. Installers should confirm the cable's actual outside diameter and armour construction, as cables with similar conductor sizes can have different overall dimensions and armour characteristics.
Because larger SWA cables can impose considerable weight and bending forces on electrical equipment, suitable cable supports should be provided independently of the gland where necessary. Correct mounting, appropriate earthing accessories and adherence to the manufacturer's installation instructions are essential for dependable performance.
The distinction between CW and BW armoured cable glands is important when selecting components for an electrical installation. Both types are designed to mechanically terminate cable armour, but they differ in their environmental sealing arrangements.
A BW cable gland is generally intended for dry indoor installations and does not include an integral weatherproof compression seal around the cable's outer sheath. A CW cable gland, such as the Partex PXCW-63L, additionally incorporates outer sheath sealing, making it more appropriate for outdoor and moisture-exposed applications when the gland and completed installation meet the required environmental protection criteria.
The CW designation alone should not be treated as confirmation of a particular ingress protection (IP) rating. The required rating should be checked against the manufacturer's technical documentation, and suitable enclosure-entry sealing components should be used where necessary.
Tick the specs you need, then view products that match.
| Application | Armoured cable, Outdoor | |
|---|---|---|
| Device Type | Armoured cable gland | |
| Thread Size | M63 | |
| Cable Diameter (mm) | 56–65.3 mm | |
| Manufacturer | Partex | |
| Series | PXCW Outdoor Cable Glands | |
| Manufacturer part number | PXCW-63L | |
| Product type | Outdoor armoured cable gland | |
| Gland type | CW | |
| Entry thread size | M63 | |
| Thread system | Metric | |
| Nominal thread diameter | 63 mm | |
| Compatible cable outside diameter | 56.0–65.3 mm | |
| Intended cable construction | Steel wire armoured | |
| Armour termination method | Mechanical clamping | |
| Outer sheath sealing | Compression seal | |
| Armour continuity | Through conductive metallic gland components when correctly assembled | |
| Mounting arrangement | Threaded enclosure entry or cable gland plate | |
| Intended installation environment | Outdoor and moisture-exposed electrical installations, subject to the gland's specified environmental rating | |
| Primary application | SWA cable termination, mechanical retention and environmental sealing | |
| HS Code | 85369010 |
The Partex PXCW-63L is an M63 CW outdoor cable gland used to terminate, mechanically secure and seal compatible steel wire armoured electrical cables. Typical applications include outdoor electrical enclosures, industrial power distribution equipment, switchgear and control panels.
The PXCW-63L is specified for cables with an overall outside diameter of 56.0–65.3 mm. Installers should also confirm that the cable's armour construction is compatible with the gland's clamping arrangement.
The gland has an M63 metric threaded entry, with a nominal thread diameter of 63 mm. It should be fitted into a compatible enclosure entry or gland plate using the appropriate mounting and sealing components.
Both CW and BW cable glands are used for armoured cable termination. BW glands are generally intended for dry indoor installations, while CW glands additionally incorporate an outer sheath compression seal for improved environmental protection in suitable outdoor or moisture-exposed applications.
The gland's metallic armour clamping arrangement supports electrical continuity between the cable armour and gland body, while its outer sheath compression seal helps protect the cable entry against moisture. Any required protective earth connection must be correctly installed and verified. The final ingress protection performance depends on the gland's specified rating, cable compatibility, enclosure sealing and installation method.
The Partex PXCW-63L M63 CW outdoor cable gland combines mechanical armour retention with outer sheath sealing for large steel wire armoured cables. It offers electrical contractors, panel builders and industrial maintenance teams a practical solution for secure SWA cable termination in appropriately specified outdoor and industrial installations.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.