Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
DTGPG11LG Partex nylon cable gland, PG11, LIGHT GREY, cable Ø 5 to 10mm, pack 10
Partex DTGPG11LG is a light grey nylon cable gland with a PG11 thread and a 5-10 mm cable clamping range, designed for secure cable entry and retention in compatible electrical enclosures, control panels and industrial equipment, supplied in a pack of 10.
£3.09
Why Choose the Partex DTGPG11LG PG11 Nylon Cable Gland?
The Partex DTGPG11LG is a versatile PG11 nylon cable gland designed to provide secure cable entry and retention in electrical enclosures, control panels and industrial equipment. Featuring a light grey finish and a cable clamping range of 5–10 mm diameter, this PG-threaded cable gland is a practical choice for professional electrical installations requiring reliable cable management.
Manufactured from nylon, the DTGPG11LG provides a lightweight, non-metallic alternative to traditional metal cable glands. Its PG11 threaded connection is intended for compatible PG11 enclosure entries, while the cable clamping arrangement helps retain cables within the specified diameter range. When correctly selected and installed, the gland supports tidy cable routing and helps limit unwanted cable movement at the enclosure entry.
Supplied in a pack of 10 light grey nylon cable glands, the Partex DTGPG11LG is suitable for electrical contractors, control panel builders, equipment manufacturers and maintenance engineers. Its combination of PG11 thread size, 5–10 mm cable compatibility and light grey nylon construction makes it useful for new installations and replacement work involving equipment with PG-threaded cable entries.
Key Advantages
- PG11 thread provides compatibility with suitably sized PG11 electrical enclosure entries.
- 5–10 mm cable clamping range accommodates cables with outside diameters within the specified limits.
- Nylon construction offers a lightweight, non-metallic cable entry solution.
- Light grey finish complements electrical cabinets, control panels and neutral-coloured equipment housings.
- Secure cable retention when correctly matched to the cable diameter and installed.
- Suitable for control panels and electrical cabinets with compatible PG11 entries.
- Useful for replacement installations where existing equipment uses PG-threaded cable glands.
- Helps organise cable entry points and maintain tidy wiring arrangements.
- Non-metallic gland body provides an alternative to brass cable glands where appropriate.
- Pack of 10 offers a convenient quantity for electrical installation, maintenance and panel assembly projects.
Key Features
- Partex DTGPG11LG nylon cable gland.
- PG11 threaded connection.
- 5–10 mm cable diameter range.
- Light grey colour for a neat electrical enclosure finish.
- Nylon gland construction.
- Designed for securing compatible cables at electrical enclosure entry points.
- Suitable for cables with outside diameters within the specified clamping range.
- Provides a practical cable entry and retention arrangement.
- Suitable for electrical cabinets, control panels and equipment housings.
- Useful for installations and maintenance involving PG11 threaded entries.
- Designed for compatible PG11 threaded or appropriately prepared enclosure openings.
- Supplied in a pack of 10 pieces.
Secure PG11 Cable Entry for Electrical Enclosures and Equipment
Cable glands provide an important interface between electrical cables and the equipment they enter. The Partex DTGPG11LG is designed for use with PG11 cable entry points and cables measuring 5–10 mm in outside diameter. Selecting a gland with the correct clamping range helps ensure the cable is appropriately retained at the enclosure entry, supporting a neat and organised wiring installation.
The PG11 thread is particularly relevant when working with equipment that uses the PG cable gland system rather than metric threaded entries. PG and metric threads are not directly interchangeable, so installers should confirm the enclosure thread before choosing a replacement gland. The DTGPG11LG is intended for PG11-compatible entries and should not be assumed to fit M16, M20 or other metric openings.
The gland's light grey nylon construction makes it a practical non-metallic cable entry component for suitable electrical installations. Its neutral finish can complement light-coloured electrical cabinets and control panel enclosures. Before fitting, the cable's actual outside diameter should be checked against the 5–10 mm range. The gland should be installed according to the manufacturer's instructions without damaging the cable sheath or enclosure. Where ingress protection, outdoor suitability, ultraviolet resistance, chemical resistance or specific temperature performance is required, the relevant manufacturer ratings and any necessary sealing accessories should be confirmed before use.
Typical Applications
- Electrical control panel cable entries.
- Industrial electrical cabinets with PG11 openings.
- Machinery and equipment cable management.
- Maintenance of equipment using PG-threaded cable glands.
- Commercial and industrial electrical installations.
- Electrical control and instrumentation enclosures.
- OEM electrical equipment manufacturing.
- Automation and control system cabinets.
- Replacement of compatible PG11 cable glands.
- Professional electrical installations using cables with 5–10 mm outside diameters.
Technical Specifications
Tick the specs you need, then view products that match.
| Colour | Light Grey | |
|---|---|---|
| Device Type | Cable gland | |
| Material | Nylon (PA 6.6) | |
| Thread Size | PG11 | |
| Cable Diameter (mm) | 5–10 mm | |
| Manufacturer | Partex | |
| Model | DTGPG11LG | |
| Product type | Nylon cable gland | |
| Thread standard | PG (Panzergewinde) | |
| Thread size | PG11 | |
| Minimum cable diameter | 5 mm | |
| Maximum cable diameter | 10 mm | |
| Cable clamping range | 5–10 mm | |
| Material | Nylon | |
| Colour | Light grey | |
| Primary function | Cable entry and retention | |
| Installation location | Compatible PG11 electrical enclosure or equipment entry | |
| Typical applications | Electrical control panels, machinery enclosures and equipment wiring | |
| Pack quantity | 10 pieces | |
| HS Code | 39269097 |
Frequently Asked Questions
What is the Partex DTGPG11LG used for?
The Partex DTGPG11LG is a PG11 nylon cable gland used to secure compatible cables as they enter electrical enclosures, control panels and equipment housings. It is designed for cables with outside diameters between 5 mm and 10 mm.
What cable diameter does the Partex DTGPG11LG accept?
The DTGPG11LG has a specified cable clamping range of 5–10 mm. This refers to the cable's overall outside diameter, including its outer sheath, rather than the conductor cross-sectional area.
What does PG11 mean on a cable gland?
PG11 identifies the gland's thread size within the PG (Panzergewinde) thread system. It is used to match the cable gland to a compatible threaded enclosure entry and should not be confused with the cable clamping diameter.
What is the difference between the DTGPG11LG and DTGPG11BLK?
Both cable glands have a PG11 thread, a 5–10 mm cable clamping range and nylon construction. The difference is their colour: the DTGPG11LG is light grey, while the DTGPG11BLK is black.
Is the Partex DTGPG11LG suitable for outdoor installations?
Outdoor suitability depends on the cable gland's specified environmental properties, including ultraviolet resistance, operating temperature and ingress protection. These ratings should be verified against the manufacturer's technical information before using the DTGPG11LG outdoors.
How many Partex DTGPG11LG cable glands are supplied in a pack?
The Partex DTGPG11LG is supplied in a pack of 10 light grey nylon cable glands, making it convenient for electrical panel building, maintenance and equipment installation projects.
Can the DTGPG11LG be used with armoured cables?
The DTGPG11LG is a nylon cable gland intended for compatible cable entry and retention. It should not be assumed suitable for terminating or earthing steel wire armoured cables. Where armour retention or protective earth continuity is required, an appropriately specified armoured cable gland should be selected.
Trusted by Electrical Installers and Panel Builders
The Partex DTGPG11LG provides a practical PG11 cable entry solution for professional electrical installations. Combining nylon construction, a light grey finish, a 5–10 mm cable clamping range and a convenient pack of 10, it is a useful choice for cable management in compatible electrical enclosures, control panels and industrial equipment.
