Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
DTGM50BLK Partex nylon cable gland, M50, BLACK, cable Ø 30 to 38mm, pack 1
Partex DTGM50BLK is a black nylon cable gland with an M50 metric thread and a 30-38 mm cable clamping range, designed for secure cable entry and retention in compatible industrial electrical enclosures, control panels and machinery equipment, supplied as a pack of 1.
£1.51
Why Choose the Partex DTGM50BLK M50 Nylon Cable Gland?
The Partex DTGM50BLK is a heavy-duty M50 nylon cable gland designed to provide secure cable entry and retention in electrical enclosures, industrial control panels and machinery equipment. Featuring a black finish and a cable clamping range of 30–38 mm diameter, this large metric cable gland is suitable for professional electrical installations requiring a substantial cable entry point.
Manufactured from nylon, the DTGM50BLK provides a lightweight, non-metallic alternative to traditional brass and other metal cable glands. Its M50 metric threaded connection allows installation into compatible enclosure entries, while the cable clamping arrangement is designed to grip cables within the specified outside diameter range. When correctly installed, the gland helps retain the cable at the enclosure entry and supports organised cable routing into electrical equipment.
Designed for cables measuring 30–38 mm in outside diameter, the Partex DTGM50BLK is particularly useful for larger cable entries in industrial electrical cabinets, power distribution equipment and machinery enclosures. Its black nylon construction provides a professional appearance for industrial applications where a dark-coloured cable entry component is preferred. Supplied as a single cable gland, it offers a practical solution for individual installations, maintenance replacements and equipment upgrades.
Key Advantages
- M50 metric thread provides compatibility with suitably sized electrical enclosure cable entries.
- 30–38 mm cable clamping range accommodates larger cables within the specified outside diameter limits.
- Nylon construction offers a lightweight, non-metallic cable entry solution.
- Black finish complements industrial equipment, electrical cabinets and dark-coloured enclosures.
- Secure cable retention when correctly matched to the cable diameter and installed.
- Suitable for larger cable entries in industrial control cabinets, machinery and electrical equipment.
- Helps organise cable routing through enclosure walls and equipment entry points.
- Non-metallic gland body provides an alternative to metal cable glands where appropriate.
- Single-piece pack quantity is convenient for individual cable entry requirements and maintenance replacements.
Key Features
- Partex DTGM50BLK nylon cable gland.
- M50 metric threaded connection.
- 30–38 mm cable diameter range.
- Black colour for a professional industrial enclosure finish.
- Nylon gland construction.
- Designed for securing compatible cables at electrical enclosure entry points.
- Suitable for cables with an outside diameter within the stated clamping range.
- Provides a practical cable entry and retention arrangement.
- Suitable for industrial control cabinets, electrical enclosures and machinery housings.
- Non-metallic construction for applications where a nylon cable gland is specified.
- Designed for installation in compatible M50 threaded or appropriately prepared enclosure entries.
- Supplied as a pack of 1 piece.
Secure M50 Cable Entry for Large Electrical Cables and Industrial Equipment
Cable glands provide an important interface between electrical cables and the enclosures or equipment they enter. The Partex DTGM50BLK is designed for use with M50 cable entry points and cables measuring 30–38 mm in outside diameter. Its substantial cable clamping range makes it suitable for installations involving larger cable sheaths that require an appropriately sized enclosure entry and a reliable cable retention arrangement.
The gland's nylon construction provides a non-metallic cable entry solution for applications where this material is appropriate. Its black finish offers a neat appearance when installed in industrial machinery, electrical distribution cabinets and equipment housings. The M50 metric thread provides a familiar connection format for compatible threaded entries and suitably prepared enclosure openings, making the DTGM50BLK a practical component for industrial equipment assembly and electrical maintenance.
Correct selection and installation are essential for dependable performance. The cable's actual outside diameter must fall within the specified 30–38 mm range, and the enclosure entry must be compatible with the M50 thread. The gland should be tightened according to the manufacturer's instructions without damaging the cable sheath or enclosure. Where environmental sealing, ingress protection, ultraviolet resistance, chemical resistance or specific operating temperatures are required, the manufacturer's relevant technical ratings should be verified before installation. A nylon cable gland does not provide protective earth continuity for cable armour.
Typical Applications
- Large cable entries into industrial electrical control panels.
- Industrial electrical cabinets and distribution enclosures.
- Heavy machinery and equipment cable management.
- Commercial and industrial electrical installations.
- Electrical power distribution and control equipment.
- OEM electrical equipment manufacturing.
- Industrial automation and control system enclosures.
- Plant room electrical equipment and machinery housings.
- Maintenance and replacement of compatible M50 cable glands.
- Professional electrical installations using cables with 30–38 mm outside diameters.
Technical Specifications
Tick the specs you need, then view products that match.
| Colour | Black | |
|---|---|---|
| Device Type | Cable gland | |
| Material | Nylon (PA 6.6) | |
| Thread Size | M50 | |
| Cable Diameter (mm) | 30–38 mm | |
| Manufacturer | Partex | |
| Model | DTGM50BLK | |
| Product type | Nylon cable gland | |
| Thread type | Metric | |
| Thread size | M50 | |
| Minimum cable diameter | 30 mm | |
| Maximum cable diameter | 38 mm | |
| Cable clamping range | 30–38 mm | |
| Material | Nylon | |
| Colour | Black | |
| Primary function | Cable entry and retention | |
| Installation location | Compatible electrical enclosure or equipment cable entry | |
| Typical applications | Industrial control cabinets, electrical enclosures and machinery equipment | |
| Pack quantity | 1 piece | |
| HS Code | 39269097 |
Frequently Asked Questions
What is the Partex DTGM50BLK used for?
The Partex DTGM50BLK is an M50 nylon cable gland used to secure compatible cables as they enter electrical enclosures, industrial control panels and equipment housings. It is designed for cables with outside diameters between 30 mm and 38 mm.
What cable diameter does the Partex DTGM50BLK accept?
The DTGM50BLK has a specified cable clamping range of 30–38 mm. This refers to the cable's outside diameter, including its outer sheath, rather than the conductor cross-sectional area.
What thread size does the DTGM50BLK have?
The cable gland features an M50 metric thread and is intended for installation into compatible M50 threaded entries or suitably prepared enclosure openings.
What material and colour is the Partex DTGM50BLK?
The DTGM50BLK is manufactured from nylon and supplied in black. Its non-metallic construction provides a lightweight cable entry solution for suitable electrical enclosure applications.
Is the Partex DTGM50BLK suitable for outdoor installations?
Outdoor suitability depends on the cable gland's specified environmental properties, including ultraviolet resistance, operating temperature and ingress protection. These ratings should be verified against the manufacturer's technical information before using the DTGM50BLK outdoors.
How many Partex DTGM50BLK cable glands are supplied in a pack?
The Partex DTGM50BLK is supplied as a pack of 1 black nylon cable gland, making it suitable for individual cable entry installations, maintenance replacements and equipment upgrades.
Can the DTGM50BLK be used with armoured cables?
The DTGM50BLK is a nylon cable gland intended for compatible cable entry and retention. It should not be assumed suitable for terminating or earthing steel wire armoured cables. Where armour retention or protective earth continuity is required, an appropriately specified armoured cable gland should be selected.
Trusted by Electrical Installers and Industrial Panel Builders
The Partex DTGM50BLK provides a practical M50 cable entry solution for professional electrical installations. Combining nylon construction, a black finish and a 30–38 mm cable clamping range, it is a useful choice for securing larger cables in compatible industrial control panels, electrical enclosures and machinery equipment.
