Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
DTGM40WHI Partex nylon cable gland, M40, WHITE, cable Ø 25 to 32mm, pack 1
Partex DTGM40WHI is a white nylon cable gland with an M40 metric thread and a 25-32 mm cable clamping range, designed for secure cable entry and retention in compatible electrical enclosures, control panels and industrial equipment, supplied as a pack of 1.
£1.14
Why Choose the Partex DTGM40WHI M40 Nylon Cable Gland?
The Partex DTGM40WHI is a heavy-duty M40 nylon cable gland designed to provide secure cable entry and retention in electrical enclosures, control panels and industrial equipment. Featuring a white finish and a cable clamping range of 25–32 mm diameter, this metric cable gland is suitable for professional electrical installations requiring a larger cable entry point.
Manufactured from nylon, the DTGM40WHI provides a lightweight, non-metallic alternative to traditional metal cable glands. Its M40 metric threaded connection allows installation into compatible enclosure entries, while the cable clamping arrangement is designed to grip cables within the specified outside diameter range. When correctly installed, the gland helps retain the cable at the enclosure entry and supports an organised cable installation.
Designed for cables measuring 25–32 mm in outside diameter, the Partex DTGM40WHI is particularly useful for larger cable entries in industrial control cabinets, electrical distribution equipment and machinery enclosures. Its white nylon construction provides a clean, neutral appearance for applications where a light-coloured cable entry component is preferred. Supplied as a single cable gland, it offers a practical option for individual installations, maintenance work and equipment upgrades.
Key Advantages
- M40 metric thread provides compatibility with suitably sized electrical enclosure cable entries.
- 25–32 mm cable clamping range accommodates larger cables within the specified outside diameter limits.
- Nylon construction offers a lightweight, non-metallic cable entry solution.
- White finish complements light-coloured electrical enclosures and equipment housings.
- Secure cable retention when correctly matched to the cable diameter and installed.
- Suitable for larger cable entries in electrical cabinets, machinery and industrial equipment.
- Helps organise cable routing through enclosure walls and equipment entry points.
- Non-metallic gland body provides an alternative to brass and other metal cable glands where appropriate.
- Single-piece pack quantity is convenient for individual cable entry requirements and maintenance replacements.
Key Features
- Partex DTGM40WHI nylon cable gland.
- M40 metric threaded connection.
- 25–32 mm cable diameter range.
- White colour for a clean, neutral enclosure finish.
- Nylon gland construction.
- Designed for securing compatible cables at electrical enclosure entry points.
- Suitable for cables with an outside diameter within the stated clamping range.
- Provides a practical cable entry and retention arrangement.
- Suitable for industrial control cabinets, electrical enclosures and machinery housings.
- Non-metallic construction for applications where a nylon cable gland is specified.
- Designed for installation in compatible M40 threaded or appropriately prepared enclosure entries.
- Supplied as a pack of 1 piece.
Secure M40 Cable Entry for Larger Electrical Cables
Cable glands provide an important connection interface between electrical cables and the enclosures or equipment they enter. The Partex DTGM40WHI is designed for use with M40 cable entry points and cables measuring 25–32 mm in outside diameter. Its larger cable clamping range makes it suitable for applications involving substantial cable sheaths that require an appropriately sized enclosure entry.
The gland's nylon construction provides a non-metallic cable entry solution for applications where this material is appropriate. Its white finish offers a neat appearance when installed in light-coloured cabinets, control panels or equipment housings. The M40 metric thread provides a standardised connection format for compatible threaded entries and suitably prepared enclosure openings.
Correct cable gland selection and installation are essential. The cable's actual outside diameter must fall within the specified 25–32 mm range, and the enclosure entry must be compatible with the M40 thread. The gland should be tightened according to the manufacturer's instructions without damaging the cable sheath or enclosure. Where environmental sealing, ingress protection, ultraviolet resistance, chemical resistance or specific operating temperatures are required, the manufacturer's relevant technical ratings should be verified. A nylon cable gland does not provide protective earth continuity for cable armour.
Typical Applications
- Large cable entries into electrical control panels.
- Industrial electrical cabinets and enclosures.
- Machinery and equipment cable management.
- Commercial and industrial electrical installations.
- Electrical distribution and control equipment.
- OEM electrical equipment manufacturing.
- Automation and industrial control system enclosures.
- Plant room electrical equipment and machinery housings.
- Maintenance and replacement of compatible M40 cable glands.
- Professional electrical installations using cables with 25–32 mm outside diameters.
Technical Specifications
Tick the specs you need, then view products that match.
| Colour | White | |
|---|---|---|
| Device Type | Cable gland | |
| Material | Nylon (PA 6.6) | |
| Thread Size | M40 | |
| Cable Diameter (mm) | 25–32 mm | |
| Manufacturer | Partex | |
| Model | DTGM40WHI | |
| Product type | Nylon cable gland | |
| Thread type | Metric | |
| Thread size | M40 | |
| Minimum cable diameter | 25 mm | |
| Maximum cable diameter | 32 mm | |
| Cable clamping range | 25–32 mm | |
| Material | Nylon | |
| Colour | White | |
| Primary function | Cable entry and retention | |
| Installation location | Compatible electrical enclosure or equipment cable entry | |
| Typical applications | Industrial control cabinets, electrical enclosures and machinery equipment | |
| Pack quantity | 1 piece | |
| HS Code | 39269097 |
Frequently Asked Questions
What is the Partex DTGM40WHI used for?
The Partex DTGM40WHI is an M40 nylon cable gland used to secure compatible cables as they enter electrical enclosures, control panels and equipment housings. It is designed for cables with outside diameters between 25 mm and 32 mm.
What cable diameter does the Partex DTGM40WHI accept?
The DTGM40WHI has a specified cable clamping range of 25–32 mm. This refers to the cable's outside diameter, including its outer sheath, rather than the conductor cross-sectional area.
What thread size does the DTGM40WHI have?
The cable gland features an M40 metric thread and is intended for installation into compatible M40 threaded entries or suitably prepared enclosure openings.
What material and colour is the Partex DTGM40WHI?
The DTGM40WHI is manufactured from nylon and supplied in white. Its non-metallic construction provides a lightweight cable entry solution for suitable electrical enclosure applications.
Is the Partex DTGM40WHI suitable for outdoor installations?
Outdoor suitability depends on the cable gland's specified environmental properties, including ultraviolet resistance, operating temperature and ingress protection. These ratings should be verified against the manufacturer's technical information before using the DTGM40WHI outdoors.
How many Partex DTGM40WHI cable glands are supplied in a pack?
The Partex DTGM40WHI is supplied as a pack of 1 white nylon cable gland, making it suitable for individual cable entry installations, maintenance replacements and equipment upgrades.
Can the DTGM40WHI be used with armoured cables?
The DTGM40WHI is a nylon cable gland intended for compatible cable entry and retention. It should not be assumed suitable for terminating or earthing steel wire armoured cables. Where armour retention or protective earth continuity is required, an appropriately specified armoured cable gland should be selected.
Trusted by Electrical Installers and Panel Builders
The Partex DTGM40WHI provides a practical M40 cable entry solution for professional electrical installations. Combining nylon construction, a white finish and a 25–32 mm cable clamping range, it is a useful choice for securing larger cables in compatible control panels, electrical enclosures and industrial equipment.
