Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
DTGM20ET/BLK Partex nylon cable gland, M20, BLACK, cable Ø 6 to 12mm, pack 10
Partex DTGM20ET/BLK is a black nylon cable gland with an M20 metric thread and a 6-12 mm cable clamping range, designed for secure cable entry and retention in compatible electrical enclosures, control panels and industrial equipment, supplied in a pack of 10.
£4.30
Why Choose the Partex DTGM20ET/BLK M20 Nylon Cable Gland?
The Partex DTGM20ET/BLK is a practical and versatile M20 nylon cable gland designed to provide secure cable entry and retention in electrical enclosures, control panels and industrial equipment. Featuring a black finish and a cable clamping range of 6–12 mm diameter, this metric cable gland is suitable for professional electrical installations requiring an organised and mechanically secure cable entry point.
Manufactured from nylon, the DTGM20ET/BLK offers a lightweight, non-metallic alternative to metal cable glands. Its M20 metric threaded connection allows installation into compatible enclosure entries, while the cable clamping arrangement is designed to grip cables within the specified diameter range. When correctly installed with compatible components, the gland helps provide cable retention and supports an orderly cable entry arrangement.
Supplied in a pack of 10 black nylon cable glands, the Partex DTGM20ET/BLK is suitable for electrical contractors, control panel manufacturers, machinery builders and maintenance engineers. Its combination of M20 thread size, 6–12 mm cable compatibility and black nylon construction makes it a useful cable management component for commercial and industrial electrical installations.
Key Advantages
- M20 metric thread provides compatibility with suitably sized enclosure cable entries.
- 6–12 mm cable clamping range accommodates cables with outside diameters within the specified limits.
- Nylon construction provides a lightweight, non-metallic cable entry solution.
- Black finish offers a professional appearance for electrical enclosures and equipment.
- Secure cable retention when correctly matched to the cable diameter and installed.
- Suitable for electrical panels and enclosures in commercial and industrial applications.
- Helps organise cable entry points and maintain tidy equipment wiring.
- Non-metallic gland body provides an alternative to brass and other metal cable glands where appropriate.
- Pack of 10 provides a convenient quantity for panel building, maintenance and installation projects.
Key Features
- Partex DTGM20ET/BLK nylon cable gland.
- M20 metric threaded connection.
- 6–12 mm cable diameter range.
- Black colour for a professional enclosure finish.
- Nylon gland construction.
- Designed for securing compatible cables at electrical enclosure entry points.
- Suitable for cables with an outside diameter within the stated clamping range.
- Provides a practical cable entry and retention arrangement.
- Suitable for control panels, electrical cabinets and machinery enclosures.
- Non-metallic construction for applications where a nylon cable gland is specified.
- Designed for installation in compatible M20 threaded or appropriately prepared enclosure entries.
- Supplied in a pack of 10 pieces.
Secure M20 Cable Entry for Electrical Enclosures and Control Panels
Cable glands provide an important interface between electrical cables and the enclosures or equipment they enter. The Partex DTGM20ET/BLK is designed for use with M20 cable entry points and cables measuring 6–12 mm in outside diameter. Selecting a gland with the correct cable clamping range helps ensure that the cable is held appropriately and reduces the risk of movement at the enclosure entry.
The gland's nylon construction makes it suitable for applications where a non-metallic cable entry component is preferred. Its black finish can complement dark-coloured equipment housings, industrial machinery and electrical cabinets. In control panel manufacturing and equipment assembly, the M20 thread provides a convenient metric connection format for suitably prepared enclosure entries.
Correct installation is essential. The cable's actual outside diameter should be checked against the gland's 6–12 mm clamping range, and the M20 entry must be compatible with the gland thread. The gland should be tightened according to the manufacturer's instructions without damaging the cable sheath or enclosure. Where environmental sealing, ingress protection, chemical resistance or outdoor suitability is required, the relevant product ratings and any necessary sealing accessories should be confirmed before installation. A nylon cable gland should not be relied upon as a protective earth connection.
Typical Applications
- Electrical control panel cable entries.
- Industrial electrical cabinets and enclosures.
- Machinery and equipment cable management.
- Commercial electrical installations.
- Electrical distribution and control equipment.
- OEM electrical equipment manufacturing.
- Automation and control system enclosures.
- Plant room electrical equipment.
- Maintenance and replacement of compatible M20 cable glands.
- Professional electrical installations using cables with 6–12 mm outside diameters.
Technical Specifications
Tick the specs you need, then view products that match.
| Colour | Black | |
|---|---|---|
| Device Type | Cable gland | |
| Material | Nylon (PA 6.6) | |
| Thread Size | M20 | |
| Cable Diameter (mm) | 6–12 mm | |
| Manufacturer | Partex | |
| Model | DTGM20ET/BLK | |
| Product type | Nylon cable gland | |
| Thread type | Metric | |
| Thread size | M20 | |
| Minimum cable diameter | 6 mm | |
| Maximum cable diameter | 12 mm | |
| Cable clamping range | 6–12 mm | |
| Material | Nylon | |
| Colour | Black | |
| Primary function | Cable entry and retention | |
| Installation location | Compatible electrical enclosure or equipment cable entry | |
| Typical applications | Control panels, electrical cabinets and industrial equipment | |
| Pack quantity | 10 pieces | |
| HS Code | 39269097 |
Frequently Asked Questions
What is the Partex DTGM20ET/BLK used for?
The Partex DTGM20ET/BLK is an M20 nylon cable gland used to secure compatible cables as they enter electrical enclosures, control panels and equipment housings. It is designed for cables with outside diameters between 6 mm and 12 mm.
What cable diameter does the Partex DTGM20ET/BLK accept?
The DTGM20ET/BLK has a specified cable clamping range of 6–12 mm. This refers to the cable's outside diameter, including its outer sheath, rather than the conductor cross-sectional area.
What thread size does the DTGM20ET/BLK have?
The cable gland features an M20 metric thread and is intended for installation into compatible M20 threaded entries or suitably prepared enclosure openings.
What material is the Partex DTGM20ET/BLK made from?
The DTGM20ET/BLK is manufactured from nylon, providing a lightweight, non-metallic cable gland suitable for applications where this material is appropriate.
Is the Partex DTGM20ET/BLK suitable for outdoor installations?
Outdoor suitability depends on the cable gland's specified environmental properties, including ultraviolet resistance, temperature limits and ingress protection. These ratings should be verified against the manufacturer's technical information before using the DTGM20ET/BLK outdoors.
How many Partex DTGM20ET/BLK cable glands are supplied in a pack?
The Partex DTGM20ET/BLK is supplied in a pack of 10 black nylon cable glands, making it convenient for electrical panel building, installation and maintenance work.
Can the DTGM20ET/BLK be used with armoured cables?
The DTGM20ET/BLK is a nylon cable gland intended for compatible cable entry and retention. It should not be assumed suitable for terminating or earthing steel wire armoured cables. Where armour retention or earth continuity is required, an appropriately specified armoured cable gland should be selected.
Trusted by Electrical Installers and Panel Builders
The Partex DTGM20ET/BLK provides a practical M20 cable entry solution for professional electrical installations. Combining durable nylon construction, a black finish, a 6–12 mm cable clamping range and a convenient pack of 10, it is a useful choice for cable management in control panels, electrical enclosures and industrial equipment.
