Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
DTGM12BLK Partex nylon cable gland, M12, BLACK, cable Ø 3 to 6.5mm, pack 10
Partex DTGM12BLK black nylon M12 metric cable gland for electrical enclosure cable entry and strain relief, suitable for cable outside diameters from 3 to 6.5 mm and supplied in a pack of 10.
£2.39
Why Choose the Partex DTGM12BLK M12 Black Nylon Cable Gland?
The Partex DTGM12BLK is a compact M12 black nylon cable gland designed to provide secure cable entry and strain relief for electrical enclosures, control panels and industrial equipment. Suitable for cables with an outside diameter of 3 mm to 6.5 mm, this metric cable gland offers a practical solution for routing smaller electrical, control and signal cables through compatible enclosure openings.
Manufactured from nylon, the DTGM12BLK provides a lightweight, non-metallic cable entry solution for professional electrical installations. Its cable clamping arrangement is designed to grip a suitably sized cable sheath when correctly assembled and tightened, helping reduce unwanted cable movement and mechanical stress at the enclosure entry point.
Featuring an M12 metric thread and a black finish, the Partex DTGM12BLK is suitable for applications where compact dimensions, neat cable management and reliable cable retention are important. Supplied in a convenient pack of 10 cable glands, it is ideal for electrical contractors, control panel builders, OEM equipment manufacturers and industrial maintenance engineers.
Key Advantages
- M12 nylon cable gland for secure cable entry into compatible electrical enclosures.
- Accepts cables with an outside diameter of 3–6.5 mm.
- Black finish provides a neat appearance for electrical panels and equipment.
- Durable nylon construction offers a lightweight alternative to metal cable glands.
- Helps provide cable strain relief when correctly installed.
- Supports organised cable routing through enclosure walls and equipment housings.
- Compact M12 configuration is suitable for smaller cable entry points.
- Non-metallic construction is suitable for applications where a nylon gland is specified.
- Suitable for professional control, signal and electrical cable installations.
- Supplied in a pack of 10 for convenient panel building, installation and maintenance work.
Key Features
- Partex DTGM12BLK nylon cable gland.
- M12 metric mounting thread.
- Suitable cable outside diameter: 3–6.5 mm.
- Black cable gland body.
- Lightweight nylon construction.
- Designed for cable entry into compatible electrical enclosures.
- Cable clamping arrangement for retaining suitably sized cable sheaths.
- Supports cable strain relief and organised cable management.
- Suitable for compatible round electrical, control and signal cables.
- Compact configuration for smaller cable entry applications.
- Suitable for control panels, equipment housings and industrial electrical installations.
- Designed for installation in a compatible M12 threaded entry or suitable enclosure opening.
- Pack quantity: 10 cable glands.
Secure Cable Entry and Strain Relief for Electrical Enclosures
Cable glands are an important component of professional electrical installations, providing a controlled entry point where cables pass through electrical enclosures, junction boxes and equipment housings. The Partex DTGM12BLK is designed for smaller cables with outside diameters between 3 mm and 6.5 mm, making it a practical choice for compact control wiring, signal cables and other compatible electrical connections.
The gland's M12 metric thread allows it to be installed in a compatible threaded enclosure entry or secured through a suitable opening using an appropriate fixing arrangement. Its nylon body provides a lightweight, non-metallic solution, while the cable clamping mechanism helps hold the cable sheath in position. This can reduce unwanted cable movement and help protect internal electrical terminations from mechanical stress.
For correct installation, the cable outside diameter must fall within the specified 3–6.5 mm clamping range. The gland should be fitted to an appropriately sized enclosure entry, with any required locking or sealing accessories selected to suit the installation. The cable should be positioned correctly before the compression component is tightened according to the manufacturer's instructions. Excessive tightening should be avoided to prevent damage to the gland or cable sheath.
Where an installation requires a particular IP protection rating, environmental resistance or temperature performance, the complete gland and enclosure assembly must be checked against the manufacturer's technical information. The final protection level depends on the gland construction, cable dimensions, enclosure interface, any required seals and correct installation. The DTGM12BLK should not be assumed to provide a specific IP rating, outdoor suitability or hazardous-area approval without supporting manufacturer documentation.
Typical Applications
- Electrical control panel cable entries.
- Industrial electrical enclosures and junction boxes.
- Compact electrical equipment housings.
- Control and signal cable installations.
- OEM electrical equipment manufacturing.
- Machine control wiring and automation equipment.
- Electrical distribution and monitoring equipment.
- Panel building and enclosure assembly work.
- Electrical maintenance and replacement cable entry fittings.
- Applications requiring a black M12 nylon cable gland for cables measuring 3–6.5 mm in outside diameter.
Technical Specifications
Tick the specs you need, then view products that match.
| Colour | Black | |
|---|---|---|
| Device Type | Cable gland | |
| Material | Nylon (PA 6.6) | |
| Thread Size | M12 | |
| Cable Diameter (mm) | 3–6.5 mm | |
| Manufacturer | Partex | |
| Model | DTGM12BLK | |
| Product type | Nylon cable gland | |
| Thread type | Metric | |
| Thread size | M12 | |
| Nominal thread diameter | 12 mm | |
| Minimum cable outside diameter | 3 mm | |
| Maximum cable outside diameter | 6.5 mm | |
| Cable clamping range | 3–6.5 mm | |
| Material | Nylon | |
| Colour | Black | |
| Mounting method | Threaded enclosure cable entry | |
| Primary function | Cable entry and strain relief | |
| Typical cable types | Compatible electrical, control and signal cables | |
| Typical applications | Electrical enclosures, control panels and equipment housings | |
| Pack quantity | 10 pieces | |
| HS Code | 39269097 |
Frequently Asked Questions
What is the Partex DTGM12BLK nylon cable gland used for?
The Partex DTGM12BLK is designed to provide cable entry and strain relief where compatible electrical, control or signal cables pass into an enclosure or equipment housing. It features an M12 metric thread and is suitable for cables with an outside diameter of 3–6.5 mm.
What cable diameter fits the Partex DTGM12BLK?
The DTGM12BLK is designed for cables with an outside diameter between 3 mm and 6.5 mm. This measurement refers to the overall cable diameter, including the outer sheath, rather than the conductor cross-sectional area.
What thread size does the Partex DTGM12BLK use?
The cable gland features an M12 metric thread for installation into a compatible threaded cable entry or suitable enclosure opening. The enclosure mounting arrangement and any required fixing accessories should be checked before installation.
Is the Partex DTGM12BLK suitable for waterproof electrical enclosures?
The DTGM12BLK is a nylon cable gland intended for cable entry applications, but its suitability for a specific waterproof or dustproof installation depends on the manufacturer's confirmed IP rating and the complete installation arrangement. Check the product's technical documentation and use the required sealing accessories before specifying it for a particular enclosure protection level.
How many Partex DTGM12BLK cable glands are supplied?
This product is supplied in a pack of 10 black nylon M12 cable glands, making it suitable for electrical contractors, panel builders, OEM equipment manufacturers and industrial maintenance teams.
Trusted by Electrical Installers and Industrial Engineers
Partex nylon cable glands provide practical cable entry and strain relief solutions for professional electrical installations. The DTGM12BLK combines a compact M12 metric thread, black nylon construction and a 3–6.5 mm cable clamping range, helping electrical contractors, panel builders and maintenance engineers achieve neat, secure cable routing in control panels, industrial enclosures and electrical equipment.
