Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
9020.10 Cembre EWO IP66 Black Push-Fit Mounts
Why Choose the Cembre EWO 9020.10 IP66 Black Push-Fit Mounts The Cembre 9020.10 push-fit mounting frame is part of the EWO split cable entry system .
£9.04
Why Choose the Cembre EWO 9020.10 IP66 Black Push-Fit Mounts
The Cembre 9020.10 push-fit mounting frame is part of the EWO split cable entry system. It enables quick, tool-free installation of cable entry frames into enclosures while maintaining high ingress protection (IP66). Ideal where speed and safety are essential in industrial automation, machinery panels, and control cabinets.
Manufactured from glass-fibre reinforced PA6.6 with an integrated moulded over-seal, this casing is supplied in black (RAL 9005) and is designed for the 10 module rectangular EWO layout. It snaps into correctly prepared cut-outs and is suitable for both retrofit and new-build applications.
Key Features
- Push-fit snap-in frame for fast installation without screws or tools.
- Frame made of glass-fibre reinforced polyamide PA6.6 with stainless steel retention parts.
- Integrated moulded over-seal for IP66 sealing without a separate gasket.
- Colour: black (RAL 9005).
- Operating temperature static: -40 °C to +140 °C.
- Low-depth design to maximise internal panel space.
- Compatible with all EWO grommets designed for the 10 module layout.
Certifications
Complies with EWO system approvals including CE, UKCA, UL cURus, and RINA. IP66 rating applies when the frame and grommets are installed as specified. Materials meet UL94 V-0 fire classification.
Comparison and Selection Notes
Choose 9020.10 when you need a compact 10 module rectangular snap-in frame for rapid installation. For larger layouts consider 9020.16 or 9020.24. For square layouts use 9020.Q. For single entries or partial fill, select the appropriate EWO grommets, blind plugs, or closing plates.
Frequently Asked Questions
- What is the 9020.10 used for
- Does it maintain IP66 sealing
- Which frame layout does it fit
- What cut-out is required
- How much force is needed for push-fit
Applications
- High-throughput panel assembly where module positions are predefined for the 10 module matrix.
- Retrofitting cable entry frames into existing enclosures with minimal mechanical work.
- Test rigs and pilot builds where grommet layouts may change between iterations.
Trusted By Panel Builders
"The snap-in frame speeds up builds and keeps sealing consistent across batches." Panel Builder, UK
Technical Specifications
Tick the specs you need, then view products that match.
| Device Type | EWO Cable Entry System | |
|---|---|---|
| Material | Nylon (PA) | |
| Colour | Black | |
| Application | UV resistant | |
| IP Rating | IP66 | |
| IP Rating | IP66 | |
| Series | EWO split cable entry system - Push-fit mounts 9020 series | |
| Frame type | Snap-in or push-fit mounting rectangular frame, 10 module position layout | |
| Material | Glass-fibre reinforced PA6.6; overmoulded seal in thermoplastic elastomer TPE | |
| Colour | Black RAL 9005 | |
| Ingress protection | IP66 when used with compatible EWO grommets and an appropriate EWO frame | |
| Operating temperature static | -40 °C to +140 °C | |
| Cut-out | Snap-in mounting into a correctly prepared rectangular perforation per Cembre drawing | |
| Fixing or retention | Integrated spring or bracket elements for tool-free retention |
Frequently Asked Questions
What is the 9020.10 used for
A snap-in or push-fit mounting frame for the EWO split cable entry system, sized for the 10 module rectangular layout.
Does it maintain IP66 sealing
Yes. When combined with compatible EWO grommets and installed into a correctly prepared cut-out, the assembly achieves IP66 ingress protection.
Which frame layout does it fit
It fits the EWO 10 module rectangular layout within the 9020 series.
What cut-out is required
A rectangular panel cut-out prepared to the dimensions and tolerances specified on the Cembre drawing for 9020.10. Follow the stated tolerances to ensure correct snap-in retention and sealing.
How much force is needed for push-fit
Typically firm hand pressure. Confirm retention with a pull test after installation.
