Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1SCA114254R1001 ABB M75 EMC Metallic Compression Cable Gland 54-65mm
ABB EMCM75SET (1SCA114254R1001) M75 metallic EMC compression cable gland set for cables with an outside diameter of 54-65 mm, featuring IP67-rated sealing and an included locking nut for compatible industrial electrical enclosures.
£645.66
Why Choose the ABB EMCM75SET M75 EMC Compression Cable Gland?
The ABB EMCM75SET (1SCA114254R1001) is a heavy-duty M75 metallic EMC compression cable gland designed for secure cable entry, environmental sealing and electromagnetic compatibility in industrial electrical installations. It belongs to ABB's cable outlet accessory range for enclosed switches and is suitable for large-diameter cables used with compatible metal-enclosed electrical equipment.
Designed for cables with an outside diameter of 54–65 mm, the EMCM75SET combines a robust metallic gland body, compression sealing arrangement and EMC shielding functionality. Its design helps maintain an effective electrical connection between suitable screened cable construction and a compatible enclosure, supporting electromagnetic interference control in industrial installations.
The gland features an M75 metric mounting thread and is supplied with a locking nut. ABB lists the EMCM75SET among its IP67 metallic EMC compression glands, making it suitable for appropriately installed cable entries requiring protection against dust and temporary immersion. The final enclosure protection depends on the installation, mating surfaces, cable selection and sealing arrangements.
The EMCM75SET is particularly useful for metal-enclosed switch-disconnectors, industrial control panels and electrical distribution equipment where large screened cables must enter an enclosure securely. Its metallic EMC construction provides a practical alternative to standard cable glands when electromagnetic compatibility is an important installation requirement.
Key Advantages
- Large 54–65 mm cable diameter range accommodates suitable heavy-duty industrial cables.
- M75 metric thread provides a defined mounting interface for compatible cable entry openings.
- Metallic EMC construction supports electromagnetic shielding continuity in correctly designed installations.
- Compression sealing mechanism provides a secure cable entry connection.
- IP67 protection rating when correctly fitted and sealed in accordance with the manufacturer's requirements.
- Locking nut included for convenient installation in suitable enclosure openings.
- Designed for ABB enclosed switch accessories and compatible industrial electrical enclosures.
- Suitable for large screened power cables where EMC cable termination is required.
- Helps protect enclosure cable entries against dust and water ingress.
- Supports organised cable routing into metal-enclosed switchgear and control equipment.
- Single cable entry accessory suitable for installation as part of an appropriately specified electrical assembly.
- ABB industrial accessory design for professional electrical installations.
Key Features
- ABB EMCM metallic EMC compression gland series.
- M75 metric cable entry thread.
- 54–65 mm compatible cable outside diameter.
- Metallic gland construction.
- EMC shielding functionality for suitable screened cables.
- Compression-type cable sealing.
- IP67-rated cable gland design.
- Locking nut supplied with the gland set.
- Designed for cable entry applications in compatible enclosed electrical equipment.
- Suitable for industrial control and power distribution installations.
- Compatible with appropriate metal enclosure cable entry arrangements.
- Professional installation required to achieve the specified sealing and EMC performance.
- ABB manufacturer product ID: 1SCA114254R1001.
- ABB order code: EMCM75SET.
Technical Specifications
- Manufacturer: ABB
- Product series: EMCM EMC Compression Glands
- Model: EMCM75SET
- ABB order code: EMCM75SET
- ABB product ID: 1SCA114254R1001
- ABB product group: 311019-Metal Enclosed (Loadbreak)
- Product type: EMC compression cable gland set
- Accessory category: Cable outlet accessories
- Gland material: Metal
- Thread type: Metric
- Nominal thread size: M75
- Compatible cable outside diameter: 54–65 mm
- Cable diameter measurement: External cable diameter
- EMC version: Yes
- Screened cable application: Suitable for appropriately specified EMC cable terminations
- Sealing mechanism: Compression gland
- Protection rating: IP67 according to ABB's enclosed-switch accessory catalogue
- Locking nut: Included
- Installation interface: Compatible M75 cable entry opening
- Application: Cable entry and EMC shielding connection
- Enclosure compatibility: Suitable ABB enclosed switches and other compatible electrical enclosures
- Manufacturer catalogue description: EMCM75SET EMC Compression Gland
- EAN / GTIN: 6417019466545
- Country of origin: Finland
- Minimum order quantity: 1 piece
- Manufacturer catalogue reference: 1SCC340015C0201
Reliable EMC Cable Entry and Environmental Sealing
The ABB EMCM75SET is designed to provide a secure entry point for large-diameter industrial cables while supporting electromagnetic compatibility. In electrical installations using screened or shielded cables, an appropriate EMC gland can help establish a conductive connection between the cable screen and a compatible metallic enclosure. This connection is an important consideration when limiting unwanted electromagnetic interference.
The M75 metric thread provides the mechanical connection to the enclosure cable entry. The included locking nut supports secure mounting in suitable openings, while the compression mechanism seals around the cable's outer sheath. Correct cable sizing is essential: the EMCM75SET is intended for cables with an outside diameter between 54 mm and 65 mm.
The gland is listed in ABB's IP67 metallic EMC compression gland range. This rating indicates protection against dust ingress and temporary immersion under the applicable test conditions. Achieving the intended protection in service requires proper installation, suitable mating surfaces, correctly prepared cable entries and appropriate tightening in accordance with the manufacturer's instructions.
EMC performance also depends on the overall cable and enclosure arrangement. The cable screen must be prepared and terminated according to the equipment manufacturer's instructions, and the installation must provide the required electrical bonding. A metallic EMC gland does not independently guarantee electromagnetic compatibility for an entire electrical system.
The EMCM75SET is a cable entry accessory rather than a switching or protective device. It does not provide electrical isolation, overload protection or short-circuit protection. Its function is to support cable entry, mechanical retention, sealing and EMC continuity as part of a properly designed electrical assembly.
Typical Applications
- ABB metal-enclosed switch-disconnector installations.
- Industrial electrical control cabinets.
- Metal-enclosed load-break switch assemblies.
- Large screened power cable entries.
- Motor control and industrial automation panels.
- Variable-speed drive installations requiring EMC cable termination.
- Industrial power distribution equipment.
- Machinery control and electrical isolation enclosures.
- Manufacturing and processing facilities.
- Pumping stations and water treatment equipment.
- Commercial and industrial plant rooms.
- OEM electrical equipment requiring M75 EMC cable entry fittings.
Technical Specifications
Tick the specs you need, then view products that match.
| Device Type | EMC cable gland | |
|---|---|---|
| Thread Size | M75 | |
| Cable Diameter (mm) | 54–65 mm | |
| Application | EMC | |
| IP Rating | IP67 |
Frequently Asked Questions
What is the ABB EMCM75SET used for?
The ABB EMCM75SET is an M75 metallic EMC compression cable gland used to provide secure cable entry, environmental sealing and electromagnetic shielding continuity for suitable screened cables entering compatible electrical enclosures.
What cable diameter does the ABB EMCM75SET accept?
The EMCM75SET is designed for cables with an outside diameter of 54–65 mm, according to ABB's more recent enclosed-switch accessory catalogue. The actual cable outside diameter should be checked before installation.
What thread size does the ABB EMCM75SET have?
The gland has an M75 metric mounting thread. The receiving enclosure must have a suitable M75 entry or compatible mounting arrangement.
What does EMC mean on the ABB EMCM75SET?
EMC stands for electromagnetic compatibility. The metallic gland is designed to support an electrical connection between a suitable screened cable and a compatible enclosure, helping maintain shielding continuity and reduce unwanted electromagnetic interference.
What is the IP protection rating of the ABB EMCM75SET?
ABB lists the EMCM75SET among its IP67 metallic EMC compression glands. The specified protection depends on correct installation, appropriate cable dimensions, suitable enclosure surfaces and effective sealing.
Does the ABB EMCM75SET include a locking nut?
Yes. ABB's catalogue specifies that the EMCM metallic compression gland sets include locking nuts, allowing the gland to be secured in a compatible enclosure cable entry.
Is the ABB EMCM75SET a plastic or metal cable gland?
The EMCM75SET is a metallic EMC compression cable gland. Its conductive construction supports EMC shielding applications where a suitable cable screen must be connected to a compatible enclosure.
Can the ABB EMCM75SET be used with metal-enclosed switches?
Yes. The EMCM75SET belongs to ABB's cable outlet accessory range for enclosed switches and is suitable for compatible metal-enclosed switchgear and load-break switch installations with the required M75 cable entry arrangement.
Does the ABB EMCM75SET provide cable strain relief?
The compression gland helps secure the cable at the enclosure entry. The complete installation must still meet the applicable cable retention and strain-relief requirements, particularly for large or heavy cables.
Is the ABB EMCM75SET suitable for armoured cables?
The EMCM75SET is specified as an EMC compression gland, not as a dedicated armour-terminating gland. Where cable armour requires mechanical or electrical termination, a suitable armoured cable gland should be selected.
What is the difference between the ABB EMCM75SET and EMCM85SET?
The EMCM75SET uses an M75 thread and accepts 54–65 mm cables. The larger EMCM85SET uses an M85 thread and is listed for 65–77 mm cables in ABB's more recent enclosed-switch accessory catalogue.
What is the ABB product identification number for the EMCM75SET?
The ABB model and order code is EMCM75SET, and its manufacturer product identification number is 1SCA114254R1001. Its EAN / GTIN is 6417019466545, and it belongs to product group 311019-Metal Enclosed (Loadbreak).
Designed for Professional Industrial Electrical Installations
The ABB EMCM75SET provides a robust metallic EMC cable entry solution for large industrial cables. Combining an M75 metric thread, 54–65 mm cable compatibility, IP67-rated sealing and an included locking nut, it supports secure cable entry and shielding continuity in appropriately designed enclosed switchgear and electrical control installations.
