Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Wago 750-624/020-002 Filter module field side 24VDC
WAGO 750-624/020-002 filter module for 24 V DC field supply with surge suppression and ground fault diagnostics for WAGO I/O System 750 and 753.
£93.87
Why Choose the WAGO 750-624/020-002 Field-Side Power Supply Filter Module?
The WAGO 750-624/020-002 is a specialised field-side power supply filter and surge protection module designed for the WAGO I/O System 750 and 753. It protects the 24 V DC field supply from switching overvoltages and electrical disturbances, ensuring reliable operation of distributed automation systems and connected I/O modules.
This module integrates transient suppression and surge filtering to protect DC supply lines from high-energy disturbances caused by inductive loads, switching devices and electromagnetic interference. The module is particularly suited to installations requiring certified operation in demanding environments such as marine and offshore automation systems. :contentReference
The 750-624/020-002 variant also includes ground fault diagnostics, allowing engineers to monitor insulation conditions within the field supply circuit. The module can generate alarms when leakage resistance falls below defined thresholds, helping maintain safe and reliable operation of automation equipment. :contentReference
Key Advantages
- Protects 24 V DC field supply lines from switching surges and voltage spikes.
- Integrated transient suppression for inductive load switching disturbances.
- Provides ground fault diagnostics for insulation monitoring systems.
- Improves system reliability and EMC stability in automation networks.
- Certified for demanding environments such as marine and offshore installations.
- Compact 12 mm DIN rail module suitable for dense control cabinets.
Key Features
- Field-side surge protection and filter module.
- Nominal voltage: 24 V DC.
- Higher electrical isolation for harsh industrial environments.
- Ground fault monitoring with diagnostic output.
- 3 incoming and 3 outgoing power jumper contacts.
- LED indicators for supply voltage and ground fault alarms.
- CAGE CLAMP spring terminals for reliable wiring.
Industrial Automation Power Protection
Industrial automation systems often operate in electrically noisy environments where switching inductive loads and motor drives introduce voltage transients onto DC power lines. These disturbances can disrupt communication or damage sensitive control electronics.
The WAGO 750-624/020-002 filter module protects distributed I/O systems by suppressing surge voltages and filtering disturbances on the 24 V field supply. Its ground fault monitoring capability also supports insulation monitoring systems commonly used in marine, offshore and safety-critical installations. :contentReference
Typical Applications
- Distributed PLC and fieldbus I/O systems.
- Industrial machine control panels.
- Marine and offshore automation installations.
- Hazardous-area automation systems requiring insulation monitoring.
- Industrial environments with high electromagnetic interference.
Technical Specifications
Tick the specs you need, then view products that match.
| Signal / Input Range | 24 V DC | |
|---|---|---|
| Product Series | WAGO I/O System 750 | |
| Device Type | Power / Potential Module | |
| Coil / Supply Voltage | 24 V DC | |
| Communication | Cellular (3G/4G) | |
| IP Rating | IP20 | |
| Series | WAGO I/O System 750 / 753 | |
| Module type | Field-side power supply filter module (surge protection) | |
| Nominal voltage | 24 V DC | |
| Voltage range | 24 V DC (−25 % to +30 %) | |
| System supply voltage | 5 V DC via internal data contacts | |
| Field supply current capacity | up to 10 A via power jumper contacts | |
| Ground fault diagnostics | pre-alarm approx. 50 kΩ, main alarm approx. 25 kΩ | |
| Response time | ≤ 5 s (typical 2.5 s) | |
| Connection technology | 6 × CAGE CLAMP terminals | |
| Wire cross section | 0.08 to 2.5 mm² (AWG 28–14) | |
| Mounting type | DIN-35 rail | |
| Dimensions | approx. 12 mm width × 100 mm height × 69.8 mm depth | |
| Operating temperature | 0 °C to +55 °C | |
| Protection rating | IP20 | |
| HS Code | 85389091 | |
| Country of Manufacture | Germany |
Frequently Asked Questions
What is the WAGO 750-624/020-002 used for?
The module filters and protects the 24 V DC field supply while monitoring insulation resistance to detect ground faults.
What disturbances does the module protect against?
It suppresses switching overvoltages and transient spikes generated by inductive loads and industrial equipment.
What does the ground fault diagnostic function do?
The module monitors insulation resistance and triggers alarms when leakage resistance falls below defined thresholds.
Does the module distribute power to downstream modules?
Yes. The filtered 24 V DC supply is transmitted through integrated power jumper contacts to adjacent modules.
Which systems is the module compatible with?
The module is designed for the WAGO I/O System 750 and 753 distributed automation platforms.
Trusted by Automation Engineers
WAGO I/O System 750 modules are widely trusted by automation engineers to deliver stable and reliable distributed control systems in demanding industrial and marine environments.
