Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Wago 750-517 2Do, Ac 250 V 1A Pot-Free Relay2Co
WAGO 750-517 relay output module with four SPDT changeover relay contacts capable of switching up to 250 V AC or 30 V DC at 6 A for the WAGO 750 distributed I/O system.
£59.76
Why Choose the WAGO 750-517 Relay Output Module?
The WAGO 750-517 is a reliable 4-channel relay output module designed for the WAGO I/O System 750. It enables PLCs and industrial controllers to switch field devices such as contactors, solenoid valves, signal lamps and motors within distributed automation systems.
Each channel provides a potential-free changeover relay contact (SPDT) capable of switching loads up to 250 V AC or 30 V DC. The module supports switching currents up to 6 A per channel, making it suitable for controlling higher-power loads in industrial control environments while maintaining safe electrical isolation between controller electronics and field circuits.
The module integrates seamlessly with WAGO fieldbus couplers and programmable controllers as part of the modular WAGO 750 distributed I/O architecture. Its DIN rail mounting design and CAGE CLAMP® spring terminal technology allow fast installation and secure wiring inside industrial control cabinets.
Key Advantages
- 4 relay output channels for flexible actuator control.
- Changeover relay contacts (SPDT) allow versatile switching configurations.
- Supports AC loads up to 250 V and DC loads up to 30 V.
- High switching current capability up to 6 A per channel.
- Potential-free relay contacts provide electrical isolation.
- Compatible with WAGO 750 Series distributed I/O systems.
Key Features
- 4 relay output channels.
- Contact configuration: SPDT changeover relay contacts.
- Switching voltage: up to 250 V AC / 30 V DC.
- Maximum switching current: 6 A per channel.
- Status LEDs indicate switching state.
- Electromechanical relay contacts for reliable load switching.
- Compatible with WAGO fieldbus couplers and programmable controllers.
Industrial Relay Output Control
Relay output modules are commonly used in industrial automation to control loads that require higher switching voltages or currents than semiconductor outputs can provide. Changeover relay contacts offer flexible switching capability for normally open or normally closed circuits.
The WAGO 750-517 enables automation systems to reliably control devices such as motors, pumps, contactors and signalling equipment. When integrated into the WAGO 750 distributed I/O platform, it provides scalable and dependable output control for modern machine automation and industrial process systems.
Typical Applications
- Switching contactors and relay coils.
- Control of industrial motors and pumps.
- Industrial signalling and indicator systems.
- Machine automation and equipment control.
- Building automation and HVAC systems.
Technical Specifications
Tick the specs you need, then view products that match.
| Number of I/O | 2 | |
|---|---|---|
| Device Type | Digital I/O Module | |
| Digital Outputs | 2 | |
| Signal Type / Function | Digital, Relay | |
| Product Series | WAGO I/O System 750 | |
| Current | 1 A | |
| Voltage | 250 V | |
| IP Rating | IP20 | |
| Series | WAGO I/O System 750 | |
| Module type | Relay output module | |
| Number of outputs | 4 relay outputs | |
| Contact configuration | changeover contacts (SPDT) | |
| Switching voltage | up to 250 V AC / 30 V DC | |
| Maximum switching current | 6 A per channel | |
| Switching power | up to approx. 1500 VA (resistive load) | |
| Minimum switching current | approx. 10 mA | |
| Isolation | relay contact isolation between system and field | |
| System supply voltage | 5 V DC via internal I/O bus | |
| Connection technology | CAGE CLAMP® spring terminals | |
| Mounting | 35 mm DIN rail | |
| Module width | approx. 24 mm | |
| Operating temperature | 0 °C to +55 °C | |
| Ingress protection | IP20 | |
| HS Code | 85371098 | |
| Country of Manufacture | Germany |
Frequently Asked Questions
What does the WAGO 750-517 module do?
The module provides four relay outputs allowing PLCs and automation controllers to switch higher-power loads such as motors, contactors and industrial equipment.
What type of relay contacts are used?
The module uses changeover relay contacts (SPDT), allowing flexible switching between normally open and normally closed configurations.
What voltage can the relay outputs switch?
The relay contacts can switch loads up to 250 V AC or 30 V DC.
What current can each relay handle?
Each relay output can switch loads up to approximately 6 A.
What systems is the module compatible with?
The module is designed for the WAGO I/O System 750 and integrates with WAGO fieldbus couplers and programmable controllers.
Trusted by Automation Engineers
WAGO 750 Series I/O modules are trusted by automation engineers and machine builders worldwide for creating flexible distributed control systems in industrial automation environments.
