Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Wago 750-516 4Do, 24 Vdc 0.5A Lss
WAGO 750-516 relay output module with four SPDT changeover relay contacts capable of switching up to 250 V AC or 30 V DC at 2 A for the WAGO 750 distributed I/O system.
£46.10
Why Choose the WAGO 750-516 Relay Output Module?
The WAGO 750-516 is a versatile 4-channel relay output module designed for the WAGO I/O System 750. It enables PLCs and industrial controllers to switch field devices such as contactors, signal lamps, valves and motors in distributed automation systems.
Each channel provides a potential-free changeover relay contact (SPDT) capable of switching loads up to 250 V AC or 30 V DC. The relay contacts support switching currents up to 2 A per channel, allowing safe and reliable control of higher-voltage loads while maintaining electrical isolation between control electronics and field circuits.
The module integrates seamlessly with WAGO fieldbus couplers and programmable controllers as part of the modular WAGO 750 distributed I/O architecture. Its compact DIN rail design and CAGE CLAMP® spring terminal technology allow fast installation and secure wiring within industrial control cabinets.
Key Advantages
- 4 relay output channels for flexible load switching.
- Changeover relay contacts (SPDT) for versatile switching configurations.
- Supports AC loads up to 250 V and DC loads up to 30 V.
- Maximum switching current of 2 A per output.
- Potential-free relay contacts provide electrical isolation.
- Compatible with WAGO 750 Series distributed I/O systems.
Key Features
- 4 relay output channels.
- Contact configuration: SPDT changeover relay contacts.
- Switching voltage: up to 250 V AC / 30 V DC.
- Maximum switching current: 2 A per channel.
- Status LEDs indicate switching state.
- Electromechanical relay contacts for reliable load switching.
- Compatible with WAGO fieldbus couplers and programmable controllers.
Industrial Relay Output Control
Relay output modules are widely used in automation systems to control devices that require higher switching voltages or currents than semiconductor outputs can provide. Changeover relay contacts offer flexible switching options, allowing devices to be controlled in either normally open or normally closed configurations.
The WAGO 750-516 allows automation systems to reliably control equipment such as contactors, pumps, motors and signalling devices. When integrated into the WAGO 750 distributed I/O platform, it provides scalable and reliable output control for industrial automation and machine control systems.
Typical Applications
- Switching contactors and relay coils.
- Industrial signalling and indicator lamps.
- Machine automation systems.
- Building automation and HVAC equipment.
- Distributed PLC and remote I/O installations.
Technical Specifications
Tick the specs you need, then view products that match.
| Signal / Input Range | 24 V DC | |
|---|---|---|
| Product Series | WAGO I/O System 750 | |
| Device Type | Digital I/O Module | |
| Coil / Supply Voltage | 24 V DC | |
| Digital Outputs | 4 | |
| Signal Type / Function | Digital, Relay | |
| Number of I/O | 4 | |
| Current | 0.5 A | |
| IP Rating | IP20 | |
| Series | WAGO I/O System 750 | |
| Module type | Relay output module | |
| Number of outputs | 4 relay outputs | |
| Contact configuration | changeover contacts (SPDT) | |
| Switching voltage | up to 250 V AC / 30 V DC | |
| Maximum switching current | 2 A per channel | |
| Minimum switching current | approx. 10 mA | |
| Switching power | approx. 500 VA / 60 W (resistive load) | |
| Switching frequency | approx. 0.5 Hz at nominal load | |
| Isolation | relay contact isolation between system and field | |
| System supply voltage | 5 V DC via internal I/O bus | |
| Connection technology | CAGE CLAMP® spring terminals | |
| Mounting | 35 mm DIN rail | |
| Module width | approx. 24 mm | |
| Operating temperature | 0 °C to +55 °C | |
| Ingress protection | IP20 | |
| HS Code | 85371098 | |
| Country of Manufacture | Germany |
Frequently Asked Questions
What does the WAGO 750-516 module do?
The module provides four relay outputs allowing PLCs and automation controllers to switch higher-voltage loads such as lamps, contactors and actuators.
What type of relay contacts are used?
The module uses changeover relay contacts (SPDT), allowing flexible switching between normally open and normally closed configurations.
What voltage can the relay outputs switch?
The relay contacts can switch loads up to 250 V AC or 30 V DC.
What current can each output handle?
Each relay output can switch loads up to approximately 2 A.
What systems is the module compatible with?
The module is designed for the WAGO I/O System 750 and integrates with WAGO fieldbus couplers and programmable controllers.
Trusted by Automation Engineers
WAGO 750 Series I/O modules are trusted by automation engineers and machine builders worldwide for building flexible distributed automation systems in industrial environments.
