Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Wago 750-514 2Do, 125 Vac 0.5A Pot-Free Relay2No
WAGO 750-514 relay output module with four normally open relay outputs capable of switching up to 250 V AC or 30 V DC at 2 A for the WAGO 750 distributed I/O system.
£59.76
Why Choose the WAGO 750-514 Relay Output Module?
The WAGO 750-514 is a dependable 4-channel relay output module designed for the WAGO I/O System 750. It enables PLCs and industrial controllers to switch field devices such as contactors, signalling lamps, motors and relay coils in distributed automation systems.
Each channel provides a potential-free electromechanical relay contact capable of switching loads up to 250 V AC or 30 V DC with a maximum switching current of 2 A. The relay contacts provide reliable electrical isolation between the control electronics and field circuits, allowing safe switching of higher-voltage loads.
The module integrates seamlessly with WAGO fieldbus couplers and programmable controllers as part of the modular WAGO 750 distributed I/O architecture. Its compact DIN rail housing and CAGE CLAMP® spring terminal technology allow quick installation and secure wiring in industrial control cabinets.
Key Advantages
- 4 relay output channels for flexible load control.
- Supports AC loads up to 250 V and DC loads up to 30 V.
- Maximum switching current of 2 A per output.
- Potential-free relay contacts provide electrical isolation.
- Compatible with WAGO 750 Series distributed I/O systems.
- Quick installation using CAGE CLAMP® spring terminals.
Key Features
- 4 relay output channels.
- Contact type: normally open (NO) relay contacts.
- Switching voltage: up to 250 V AC / 30 V DC.
- Maximum switching current: 2 A per channel.
- Status LEDs indicate switching state.
- Electromechanical relay contacts for reliable load switching.
- Compatible with WAGO fieldbus couplers and controllers.
Industrial Relay Output Control
Relay output modules are widely used in automation systems to control devices requiring higher switching voltages or currents than semiconductor outputs can provide. These modules electrically isolate the PLC electronics from field devices while allowing safe switching of AC or DC loads.
The WAGO 750-514 enables reliable control of devices such as contactors, signal lamps, pumps and motors. When integrated within the WAGO 750 distributed I/O platform, it provides flexible and scalable automation solutions for modern industrial control systems.
Typical Applications
- Switching contactors and relay coils.
- Industrial signalling and indicator lamps.
- Machine automation systems.
- Building automation and HVAC systems.
- Distributed PLC and remote I/O architectures.
Technical Specifications
Tick the specs you need, then view products that match.
| Number of I/O | 2 | |
|---|---|---|
| Device Type | Digital I/O Module | |
| Digital Outputs | 2 | |
| Signal Type / Function | Digital, Relay | |
| Product Series | WAGO I/O System 750 | |
| Current | 0.5 A | |
| Voltage | 125 V | |
| IP Rating | IP20 | |
| Series | WAGO I/O System 750 | |
| Module type | Relay output module | |
| Number of outputs | 4 relay outputs | |
| Contact configuration | normally open relay contacts | |
| Switching voltage | up to 250 V AC / 30 V DC | |
| Maximum switching current | 2 A per channel | |
| Minimum switching current | approx. 10 mA | |
| Switching frequency | approx. 0.5 Hz at nominal load | |
| Isolation | field/system isolation via relay contacts | |
| System supply voltage | 5 V DC via internal I/O bus | |
| Connection technology | CAGE CLAMP® spring terminals | |
| Mounting | 35 mm DIN rail | |
| Module width | approx. 24 mm | |
| Operating temperature | 0 °C to +55 °C | |
| Ingress protection | IP20 | |
| HS Code | 85371098 | |
| Country of Manufacture | Germany |
Frequently Asked Questions
What does the WAGO 750-514 module do?
The module provides four relay outputs allowing PLCs and automation controllers to switch higher-voltage loads such as lamps, contactors and actuators.
What voltage can the relay outputs switch?
The relay contacts can switch loads up to 250 V AC or 30 V DC.
What current can each relay handle?
Each output channel can switch loads up to approximately 2 A.
Are the outputs electrically isolated?
Yes. The relay contacts provide electrical isolation between the controller electronics and the field circuit.
What systems is the module compatible with?
The module is designed for the WAGO I/O System 750 and integrates with WAGO fieldbus couplers and programmable controllers.
Trusted by Automation Engineers
WAGO 750 Series I/O modules are trusted by automation engineers and machine builders worldwide for creating flexible distributed control systems in industrial automation environments.
