Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Wago 750-513 2Do, Ac 250 V 2A Pot-Free Relay2No
WAGO 750-513 relay output module with two potential-free relay outputs capable of switching up to 250 V AC or 30 V DC at 2 A for the WAGO 750 distributed I/O system.
£59.76
Why Choose the WAGO 750-513 Relay Output Module?
The WAGO 750-513 is a reliable 2-channel relay output module designed for the WAGO I/O System 750. It allows PLCs and industrial controllers to switch higher-voltage field devices such as contactors, signalling lamps, motors and relay coils within distributed automation systems.
Each channel provides a potential-free electromechanical relay contact capable of switching loads up to 250 V AC or 30 V DC with a maximum switching current of 2 A. The relay contacts are electrically isolated from the controller electronics, allowing safe and reliable control of external loads. :contentReference
The module integrates seamlessly with WAGO fieldbus couplers and programmable controllers within the modular WAGO 750 distributed I/O architecture. Its compact DIN rail housing and CAGE CLAMP® spring terminal technology allow quick installation and secure wiring inside industrial control cabinets.
Key Advantages
- 2 relay output channels for industrial switching applications.
- Supports AC loads up to 250 V and DC loads up to 30 V.
- Maximum switching current of 2 A per output.
- Potential-free contacts providing electrical isolation.
- Compatible with WAGO 750 Series distributed I/O systems.
- Fast wiring using CAGE CLAMP® spring terminals.
Key Features
- 2 digital relay outputs.
- Contact type: 2 make contacts (normally open).
- Switching voltage: up to 250 V AC / 30 V DC.
- Maximum switching current: 2 A.
- LED indicators show switching status.
- Potential-free relay contacts for safe load switching.
- Compatible with WAGO fieldbus couplers and controllers.
Industrial Relay Output Control
Relay output modules provide a reliable interface between PLC control logic and field devices that require higher switching voltages. By using electromechanical relay contacts, these modules safely isolate the controller electronics from external loads.
The WAGO 750-513 allows automation systems to control equipment such as contactors, signal lamps and motors while maintaining electrical isolation between the controller and the field circuit. The relay state is indicated by integrated LEDs for quick status monitoring. :contentReference
Typical Applications
- Switching contactors and relay coils.
- Control of industrial signalling lamps.
- Machine automation and equipment control.
- Building automation and HVAC systems.
- Distributed PLC and remote I/O installations.
Technical Specifications
Tick the specs you need, then view products that match.
| Number of I/O | 2 | |
|---|---|---|
| Device Type | Digital I/O Module | |
| Digital Outputs | 2 | |
| Signal Type / Function | Digital, Relay | |
| Product Series | WAGO I/O System 750 | |
| Current | 2 A | |
| Voltage | 250 V | |
| IP Rating | IP20 | |
| Series | WAGO I/O System 750 | |
| Module type | Relay output module | |
| Number of outputs | 2 relay outputs | |
| Contact configuration | 2 make contacts (NO) | |
| Switching voltage | up to 250 V AC / 30 V DC | |
| Maximum switching current | 2 A | |
| Minimum switching current | approx. 10 mA | |
| Switching frequency | approx. 0.5 Hz at nominal load | |
| Isolation | field/system isolation via relay contacts | |
| System supply voltage | 5 V DC via internal I/O bus | |
| Connection technology | CAGE CLAMP® spring terminals | |
| Mounting | 35 mm DIN rail | |
| Module width | approx. 12 mm | |
| Operating temperature | 0 °C to +55 °C | |
| Ingress protection | IP20 | |
| HS Code | 85371098 | |
| Country of Manufacture | Germany |
Frequently Asked Questions
What does the WAGO 750-513 module do?
The module provides two relay outputs allowing PLCs and automation controllers to switch higher-voltage devices such as lamps, contactors and actuators.
What voltage can the relay outputs switch?
The relay contacts can switch loads up to 250 V AC or 30 V DC.
What current can each output handle?
Each relay output can switch loads up to approximately 2 A.
Are the relay contacts electrically isolated?
Yes. The outputs use potential-free relay contacts which provide electrical isolation between the controller electronics and the field circuit.
What systems is the module compatible with?
The module is designed for the WAGO I/O System 750 and works with WAGO fieldbus couplers and programmable controllers.
Trusted by Automation Engineers
WAGO 750 Series I/O modules are widely used by automation engineers and system integrators to build reliable distributed control systems across manufacturing, infrastructure and process automation industries.
