Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
WAGO 750-513/000-001 relay output module with two normally open relay outputs capable of switching up to 250 V AC or 30 V DC at 2 A for the WAGO 750 distributed I/O system.
£59.76
The WAGO 750-513/000-001 is a dependable 2-channel relay output module designed for the WAGO I/O System 750. It allows PLCs and industrial controllers to switch higher-voltage field devices such as contactors, indicator lamps, motors and relay coils within distributed automation systems.
Each channel provides a potential-free electromechanical relay contact capable of switching loads up to 250 V AC or 30 V DC with a maximum switching current of 2 A. These relay contacts provide reliable isolation between the controller electronics and the field circuit, enabling safe switching of external loads in industrial control environments.
The module integrates seamlessly with WAGO fieldbus couplers and programmable controllers as part of the flexible WAGO 750 distributed I/O architecture. Its compact DIN rail housing and CAGE CLAMP® spring terminal technology allow fast installation and secure wiring inside industrial control cabinets.
Relay output modules are widely used in industrial automation to control devices requiring higher switching voltages or currents than semiconductor outputs can provide. These modules electrically isolate PLC electronics from field devices while allowing safe switching of AC or DC loads.
The WAGO 750-513/000-001 provides reliable relay switching for loads such as contactor coils, motors, signalling devices and control circuits. When integrated within the WAGO 750 distributed I/O platform, it enables flexible and scalable automation architectures for industrial control systems.
Tick the specs you need, then view products that match.
| Number of I/O | 2 | |
|---|---|---|
| Device Type | Digital I/O Module | |
| Digital Outputs | 2 | |
| Signal Type / Function | Digital, Relay | |
| Product Series | WAGO I/O System 750 | |
| Current | 2 A | |
| Voltage | 250 V | |
| IP Rating | IP20 | |
| Series | WAGO I/O System 750 | |
| Module type | Relay output module | |
| Number of outputs | 2 relay outputs | |
| Contact configuration | normally open relay contacts | |
| Switching voltage | up to 250 V AC / 30 V DC | |
| Maximum switching current | 2 A | |
| Minimum switching current | approx. 10 mA | |
| Switching frequency | approx. 0.5 Hz at nominal load | |
| Isolation | field/system isolation via relay contacts | |
| System supply voltage | 5 V DC via internal I/O bus | |
| Connection technology | CAGE CLAMP® spring terminals | |
| Mounting | 35 mm DIN rail | |
| Module width | approx. 12 mm | |
| Operating temperature | 0 °C to +55 °C | |
| Ingress protection | IP20 | |
| HS Code | 85371098 | |
| Country of Manufacture | Germany |
The module provides two relay outputs allowing PLCs and automation controllers to switch higher-voltage devices such as lamps, contactors and actuators.
The relay contacts can switch loads up to 250 V AC or 30 V DC.
Each output channel can switch loads up to approximately 2 A.
Yes. The relay contacts provide isolation between the controller electronics and the field circuit.
The module is designed for the WAGO I/O System 750 and integrates with WAGO fieldbus couplers and programmable controllers.
WAGO 750 Series I/O modules are widely used by automation engineers and system integrators to build reliable distributed control systems across manufacturing, infrastructure and process automation environments.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.