Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Wago 750-484 2Ai, 4-20Ma Hart
WAGO 750-484 analogue input module with two 4–20 mA channels and HART communication for the WAGO 750 Series distributed I/O system.
£576.11
Why Choose the WAGO 750-484 2-Channel Analogue Input Module?
The WAGO 750-484 is a specialised 2-channel analogue input module designed for the WAGO 750 Series distributed I/O system. It processes standard industrial 4–20 mA current signals from field devices and converts them into digital values for PLCs and automation controllers.
This module supports HART communication and is engineered for use with intrinsically safe sensors operating in hazardous areas such as Zone 0 and Zone 1. It reads process values via the analogue interface while simultaneously enabling configuration and diagnostics of intelligent HART field devices. :contentReference
The compact DIN-rail module integrates directly with WAGO fieldbus couplers and programmable controllers, forming part of a scalable distributed automation architecture. It also supplies power to connected two-wire transmitters, eliminating the need for a separate power supply in many instrumentation installations. :contentReference
Key Advantages
- Reliable 2-channel analogue current input for process instrumentation.
- Supports industry-standard 4–20 mA current loops.
- HART communication capability for advanced field device integration.
- Intrinsically safe interface for hazardous area instrumentation.
- Integrated power supply for two-wire signal transmitters.
- Seamless integration into WAGO 750 Series distributed I/O systems.
Key Features
- 2 analogue input channels.
- Signal type: 4–20 mA current loop.
- HART protocol support for smart field devices.
- 12-bit analogue-to-digital conversion.
- Parameterisable input filtering.
- Integrated diagnostics including wire-break detection.
- Designed for use with WAGO 750 Series fieldbus nodes.
Process Instrumentation and HART Integration
Current loop signals such as 4–20 mA are widely used across industrial process automation for reliable transmission of analogue measurements over long distances. Sensors such as pressure transmitters, flow meters and level instruments commonly use this signalling method because it provides strong immunity to electrical noise and signal loss.
The WAGO 750-484 module enables automation controllers to read these analogue signals while also communicating with intelligent field devices using the HART protocol. This allows engineers to configure instruments, retrieve diagnostics and access additional process variables directly through the control system. :contentReference
Typical Applications
- Industrial process instrumentation and measurement systems.
- Integration of HART-enabled transmitters.
- Oil, gas and chemical plant automation.
- Energy generation and utilities monitoring.
- Distributed PLC and remote I/O systems.
Technical Specifications
Tick the specs you need, then view products that match.
| Signal / Input Range | 4–20 mA | |
|---|---|---|
| Product Series | WAGO I/O System 750 | |
| Device Type | Analogue I/O Module | |
| Signal Type / Function | Analogue | |
| Number of I/O | 2 | |
| IP Rating | IP20 | |
| Series | WAGO I/O System 750 | |
| Module type | Analogue input module | |
| Number of inputs | 2 analogue channels | |
| Signal type | Current | |
| Input range | 4…20 mA | |
| Sensor connection | 2-wire transmitters | |
| Resolution | 12 bit | |
| Typical conversion time | approx. 10 ms | |
| Sensor supply voltage | approx. 16.5 V DC | |
| System supply voltage | 5 V DC via internal bus | |
| Mounting | 35 mm DIN rail | |
| Connection technology | WAGO CAGE CLAMP® spring terminals | |
| Ingress protection | IP20 | |
| HS Code | 85389099 | |
| Country of Manufacture | Germany |
Frequently Asked Questions
What does the WAGO 750-484 module do?
The module reads analogue current signals from sensors and transmitters and converts them into digital values that can be processed by PLCs or automation controllers.
What input signals are supported?
The module supports standard industrial 4–20 mA current loop signals used by many process transmitters.
Does the module support HART communication?
Yes. The 750-484 supports HART communication, allowing configuration and diagnostic access to connected HART field devices.
Can it power field transmitters?
Yes. The module can supply power to connected two-wire transmitters, removing the need for a separate transmitter power supply in many installations.
Where is this module typically used?
It is commonly used in process automation systems for integrating pressure, flow, level and temperature transmitters into distributed PLC control systems.
Trusted by Automation Engineers
WAGO 750 Series I/O modules are widely trusted by automation engineers and system integrators to build scalable distributed control systems across manufacturing, utilities and process industries.
