Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Wago 750-363/040-000 ETHERNET ETHERNET/IP ECO fieldbus coupler 10/100 Mbit/s digital and analogue signals, XTR – Extreme version Dark Gray
WAGO 750-363/040-000 EtherNet/IP fieldbus coupler with dual RJ45 Ethernet ports for connecting WAGO I/O System 750 XTR modules to EtherNet/IP industrial automation networks.
£387.55
Why Choose the WAGO 750-363/040-000 EtherNet/IP Fieldbus Coupler?
The WAGO 750-363/040-000 is a rugged EtherNet/IP fieldbus coupler designed for the WAGO I/O System 750 XTR. It provides a reliable interface between distributed I/O modules and EtherNet/IP industrial Ethernet networks, enabling fast communication between sensors, actuators and PLC control systems.
During system start-up the coupler automatically detects all connected digital, analogue and specialty I/O modules and generates a local process image. This process image represents the entire node configuration and allows the control system to access input and output data across the EtherNet/IP network. :contentReference
The device features two integrated RJ-45 Ethernet interfaces with an internal switch, allowing the network to be wired in line topology without additional switches or hubs. Both interfaces support auto-negotiation and Auto-MDI(X), simplifying network installation in industrial automation systems. :contentReference
Key Advantages
- Reliable EtherNet/IP industrial Ethernet communication.
- Integrated dual Ethernet ports with internal switch for line topology.
- Automatic detection and configuration of connected I/O modules.
- Supports mixed installations of digital, analogue and specialty modules.
- Scalable architecture supporting up to 64 I/O modules per node.
- XTR extreme version designed for harsh industrial environments.
Key Features
- EtherNet/IP fieldbus coupler for WAGO I/O System 750 XTR.
- 10/100 Mbit/s Ethernet communication.
- Integrated two RJ-45 Ethernet interfaces with internal switch.
- Automatic creation of a local process image of connected modules.
- Supports Ethernet protocols including HTTP(S), BootP, DHCP, DNS, SNMP and FTP(S).
- DIP switch for configuration of the last byte of the IP address.
- DIN rail mounting for industrial control cabinets.
EtherNet/IP Industrial Network Integration
EtherNet/IP is widely used in industrial automation systems to connect PLC controllers, distributed I/O modules and industrial devices over Ethernet infrastructure. The WAGO 750-363/040-000 allows sensors and actuators connected to WAGO I/O modules to communicate with controllers through EtherNet/IP networks, enabling scalable distributed automation architectures. :contentReference
Within the WAGO I/O architecture, signals from connected modules are automatically mapped into the process image and transmitted through the Ethernet network. This simplifies system configuration and enables flexible expansion of distributed control systems. :contentReference
Typical Applications
- Distributed PLC I/O systems using EtherNet/IP networks.
- Industrial machine automation.
- Energy infrastructure and harsh-environment automation systems.
- Factory automation and production lines.
- Integration of sensors, actuators and analogue devices.
Technical Specifications
Tick the specs you need, then view products that match.
| Signal Type / Function | Analogue, Digital | |
|---|---|---|
| Product Series | WAGO I/O System 750 XTR | |
| Device Type | Communication / Function Module | |
| Coil / Supply Voltage | 24 V DC | |
| Communication | Ethernet, EtherNet/IP | |
| Supported Protocols | EtherNet/IP | |
| Voltage | 24 V | |
| IP Rating | IP20 | |
| Series | WAGO I/O System 750 XTR | |
| Device type | EtherNet/IP fieldbus coupler | |
| Communication protocol | EtherNet/IP | |
| Ethernet speed | 10 / 100 Mbit/s | |
| Network connection | 2 × RJ-45 Ethernet | |
| Maximum modules per node | 64 | |
| Process image | up to approx. 1020 words input / output | |
| Supply voltage | 24 V DC | |
| Mounting | DIN rail (EN 60715) | |
| Operating temperature | −40 °C to +70 °C | |
| Ingress protection | IP20 | |
| HS Code | 85371091 | |
| Country of Manufacture | Germany |
Frequently Asked Questions
What does the WAGO 750-363/040-000 coupler do?
It connects WAGO I/O System 750 XTR modules to an EtherNet/IP industrial Ethernet network so PLC systems can communicate with distributed I/O devices.
Why are two Ethernet ports included?
The integrated switch allows devices to be connected in line topology without additional network switches.
How many I/O modules can be connected?
The coupler supports up to 64 I/O modules within a single distributed node.
Is this version suitable for harsh environments?
Yes. The XTR version provides extended temperature range, improved EMC immunity and enhanced resistance to vibration and shock.
Where is the coupler installed?
The coupler is installed at the beginning of a WAGO I/O node on a DIN rail inside PLC control cabinets or distributed automation systems.
Trusted by Automation Engineers
WAGO EtherNet/IP fieldbus couplers are widely used by automation engineers and system integrators to connect distributed I/O modules to industrial Ethernet control networks.
