Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
WAGO 750-362/040-000 Modbus TCP/UDP fieldbus coupler with dual RJ45 Ethernet ports for connecting WAGO I/O System 750 XTR modules to industrial Ethernet networks.
£387.56
The WAGO 750-362/040-000 is a rugged Modbus TCP/UDP fieldbus coupler designed for the WAGO I/O System 750 XTR. It connects distributed I/O modules to industrial Ethernet networks, enabling reliable communication between sensors, actuators and PLC control systems in demanding industrial environments.
The coupler automatically detects all connected digital, analogue and speciality modules and builds a local process image representing the complete I/O configuration. This process image is transmitted through the Modbus TCP/UDP protocol, allowing controllers and SCADA systems to access real-time data from field devices. :contentReference
Equipped with two integrated RJ-45 Ethernet interfaces and an internal switch, the device supports line topology wiring. This allows EtherNet devices to be connected sequentially without external switches, simplifying installation and reducing hardware requirements. :contentReference
Industrial Ethernet networks are widely used in modern automation systems to connect PLC controllers, distributed I/O modules and supervisory control systems. The WAGO 750-362/040-000 enables field-level devices to communicate with control systems through the widely adopted Modbus TCP protocol, simplifying integration into PLC and SCADA environments. :contentReference
Within the WAGO I/O architecture, signals from connected modules are automatically mapped into the Ethernet process image. This allows distributed control architectures to scale efficiently while maintaining reliable communication between sensors, actuators and automation controllers. :contentReference
Tick the specs you need, then view products that match.
| Signal Type / Function | Analogue, Digital | |
|---|---|---|
| Product Series | WAGO I/O System 750 XTR | |
| Device Type | Communication / Function Module | |
| Coil / Supply Voltage | 24 V DC | |
| Communication | Ethernet, Modbus RTU | |
| Supported Protocols | Modbus RTU | |
| Voltage | 24 V | |
| IP Rating | IP20 | |
| Series | WAGO I/O System 750 XTR | |
| Device type | Modbus TCP fieldbus coupler | |
| Communication protocol | Modbus TCP / Modbus UDP | |
| Ethernet speed | 10 / 100 Mbit/s | |
| Network connection | 2 × RJ-45 Ethernet | |
| Maximum modules per node | 64 | |
| Maximum modules with bus extension | up to 250 | |
| Process image | up to approx. 1020 words input / output | |
| Supply voltage | 24 V DC | |
| Mounting | DIN rail (EN 60715) | |
| Operating temperature | −40 °C to +70 °C | |
| Ingress protection | IP20 | |
| HS Code | 85371091 | |
| Country of Manufacture | Germany |
It connects WAGO I/O System 750 XTR modules to an Ethernet network using the Modbus TCP/UDP protocol.
The integrated switch allows Ethernet devices to be connected in line topology without external network switches.
The coupler supports up to 64 I/O modules directly and up to 250 modules when bus extensions are used.
Yes. The XTR version provides extended temperature range, improved EMC immunity and enhanced resistance to vibration and shock.
The coupler is mounted at the beginning of a WAGO I/O node on a DIN rail within PLC control cabinets or distributed automation systems.
WAGO Modbus TCP fieldbus couplers are widely used by automation engineers and system integrators to connect distributed I/O modules to industrial Ethernet control networks.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.