Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Wago 750-310 FC Cc-Link,
WAGO 750-310 CC-Link fieldbus coupler for WAGO I/O System 750/753 enabling communication between distributed I/O modules and PLC systems.
£388.94
Why Choose the WAGO 750-310 CC-Link Fieldbus Coupler?
The WAGO 750-310 is a CC-Link fieldbus coupler designed to connect the modular WAGO I/O System 750/753 to a CC-Link industrial network. Acting as the communication gateway between field devices and the control system, the coupler exchanges process data between connected I/O modules and the PLC via the CC-Link fieldbus.
The coupler automatically detects all connected digital, analogue and specialty modules and creates a local process image representing the installed I/O configuration. This process image is transferred over the CC-Link network to the master controller, enabling reliable monitoring and control of sensors and actuators within distributed automation systems. :contentReference
Supporting up to 64 connected I/O modules within a single node, the 750-310 enables scalable automation architectures for machine builders and system integrators implementing distributed I/O systems across manufacturing environments. :contentReference
Key Advantages
- Reliable CC-Link communication interface for WAGO I/O systems.
- Automatic detection and configuration of connected I/O modules.
- Supports mixed installations of digital, analogue and speciality modules.
- Scalable architecture supporting up to 64 modules per node.
- Efficient process data exchange between field devices and PLC systems.
- Compact DIN rail module for industrial automation cabinets.
Key Features
- CC-Link fieldbus coupler for WAGO I/O System 750/753.
- Automatic generation of a local process image for connected modules.
- Supports mixed configurations of digital, analogue and specialty I/O modules.
- Selectable CC-Link communication speeds up to 10 Mbps.
- Supports up to 64 I/O modules per node.
- Integrated 9-pin D-Sub fieldbus connector.
- DIN rail mounting for industrial control panels.
Industrial Automation Fieldbus Communication
Fieldbus couplers provide the communication interface between distributed I/O modules and central control systems. The WAGO 750-310 enables sensors, actuators and automation equipment connected to WAGO I/O modules to communicate with PLC systems via the CC-Link industrial network.
Within the WAGO I/O System architecture, the coupler automatically creates a process image of all connected modules. Digital signals are transmitted bit-by-bit, while analogue signals are transferred word-by-word, allowing flexible mixed-signal I/O installations within industrial automation environments. :contentReference
Typical Applications
- Distributed PLC I/O systems using CC-Link networks.
- Industrial machine automation.
- Factory automation and production equipment.
- Process monitoring and control systems.
- Integration of sensors, actuators and analogue devices.
Technical Specifications
Tick the specs you need, then view products that match.
| Supported Protocols | CC-Link | |
|---|---|---|
| Product Series | WAGO I/O System 750 | |
| Device Type | Communication / Function Module | |
| Coil / Supply Voltage | 24 V DC | |
| Communication | CC-Link | |
| Voltage | 24 V | |
| IP Rating | IP20 | |
| Series | I/O System 750 / 753 | |
| Device type | Fieldbus coupler | |
| Communication protocol | CC-Link | |
| Baud rates | 156 kbps, 625 kbps, 2.5 Mbps, 5 Mbps, 10 Mbps | |
| Maximum modules per node | 64 | |
| Transmission medium | Shielded twisted-pair cable | |
| Fieldbus connection | 9-pin D-Sub connector | |
| Supply voltage | 24 V DC (−15% to +20%) | |
| Power jumper contact current | up to 10 A | |
| Mounting | DIN rail (EN 60715) | |
| Dimensions | approx. 51 × 65 × 100 mm | |
| Ingress protection | IP20 | |
| Application | Distributed industrial I/O communication via CC-Link | |
| HS Code | 85176200 | |
| Country of Manufacture | Germany |
Frequently Asked Questions
What does the WAGO 750-310 fieldbus coupler do?
It connects the WAGO I/O System 750/753 to a CC-Link network and manages communication between the PLC and connected I/O modules.
How many modules can be connected to this coupler?
The coupler supports up to 64 I/O modules within a single distributed I/O node.
What communication protocol does the coupler use?
The 750-310 communicates using the CC-Link industrial fieldbus protocol.
Does the coupler support analogue and digital modules?
Yes. It supports mixed configurations of digital, analogue and speciality modules connected to the WAGO I/O system.
Where is the coupler installed?
The coupler is installed at the start of a WAGO I/O node on a DIN rail within PLC control cabinets or distributed automation systems.
Trusted by Automation Engineers
WAGO fieldbus couplers are widely used by automation engineers and machine builders to integrate distributed I/O modules into industrial control networks.
