Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£340.87
The WAGO 765-4501/100-000 is a high-performance 8-port IO-Link Master Class A with EtherNet/IP communication, designed for decentralised industrial automation, intelligent sensor connectivity and flexible machine control. Part of the WAGO I/O System Field, Series 765 WideLine, this industrial communication module connects compatible IO-Link field devices directly to EtherNet/IP-based automation networks.
Featuring eight independent IO-Link Class A ports with 5-pole A-coded M12 connectors, the WAGO 765-4501/100-000 supports intelligent sensors, actuators and IO-Link hubs. Each port provides configurable operation for IO-Link communication, digital inputs or digital outputs, enabling up to 16 digital I/O channels when configured for conventional digital operation. Digital outputs support a typical current of 2 A per channel, subject to the module's port and supply limits.
The module supports IO-Link specification V1.1, a minimum IO-Link cycle time of 400 µs and dual-port EtherNet/IP communication. Network features include BOOTP, DHCP and Device Level Ring (DLR), while Bluetooth connectivity, an OPC UA server and integrated web-based visualisation provide additional monitoring and diagnostic capabilities. Its IP67-rated WideLine enclosure is designed for installation directly on industrial machinery, reducing the need for extensive wiring to centralised control cabinets.
The WAGO 765-4501/100-000 provides a communication interface between intelligent IO-Link field devices and a higher-level EtherNet/IP controller. IO-Link technology enables compatible sensors and actuators to exchange process data, identification information, configuration parameters and diagnostic messages, extending industrial automation beyond conventional binary switching signals.
Its eight IO-Link Class A master ports are designed primarily for intelligent sensors and compatible field devices using the standard IO-Link power and communication arrangement. Each port supports one IO-Link device, allowing the module to communicate with up to eight IO-Link devices simultaneously. The module's Class A design does not provide the dedicated auxiliary actuator supply associated with IO-Link Class B ports.
The module also offers flexible digital I/O functionality. Pin 4 of each M12 port can be configured for IO-Link communication, digital input or digital output operation, while pin 2 can operate as a digital input or output. This provides up to 16 configurable digital I/O channels when the ports are used for conventional digital signals. Digital outputs support a typical current of 2 A per channel, subject to the relevant supply and port limits.
For industrial networking, the WAGO 765-4501/100-000 uses EtherNet/IP communication through two D-coded M12 Ethernet interfaces. Support for BOOTP and DHCP simplifies network address configuration, while Device Level Ring (DLR) enables integration into compatible redundant industrial Ethernet architectures.
Commissioning and maintenance are supported by integrated diagnostics for undervoltage, overcurrent, overload and overtemperature. The module also provides Bluetooth connectivity, an OPC UA server and an integrated web server, enabling compatible engineering tools to access supported device information and configuration functions.
With its IP67-rated WideLine enclosure, industrial M12 connections and compact 60 × 30 × 210 mm construction, the WAGO 765-4501/100-000 supports direct installation on machinery. This decentralised design helps reduce long cable runs, simplify machine wiring and improve access to intelligent field-device diagnostics.
| Supporting protocol for TCP/IP | Yes |
|---|---|
| Degree of protection (IP) | IP67 |
| Suitable for rail mounting | Yes |
| Supply voltage DC | 24 – 24 V |
| Voltage type (supply voltage) | DC |
| Supporting protocol for EtherNet/IP | Yes |
| Height | 30 mm |
| Depth | 210 mm |
| System accessory | Yes |
| Number of HW-interfaces industrial Ethernet | 2 |
| SIL according to IEC 61508 | None |
| IO link master | Yes |
| Radio standard Bluetooth | Yes |
| Number of functions | 2 |
| Explosion safety category for gas | None |
| Explosion safety category for dust | None |
| Width | 60 mm |
| Performance level according to EN ISO 13849-1 | None |
| Manufacturer | WAGO |
| Series | I/O System Field, Series 765 |
| Product line | WideLine |
| Model | 765-4501/100-000 |
| Product designation | 8-Port IO-Link Master Class A; EtherNet/IP; 24 V DC / 2.0 A; 8 × M12 |
| Product type | Decentralised industrial IO-Link master module |
| Fieldbus protocol | EtherNet/IP |
| Network configuration | BOOTP and DHCP |
| Network redundancy | Device Level Ring (DLR) |
| Number of IO-Link master ports | 8 |
| IO-Link master classification | Class A |
| IO-Link specification | V1.1 |
| Minimum IO-Link cycle time | 400 µs |
| IO-Link configuration modes | Automatic, manual and tool-based |
| Pin 4 operating modes | IO-Link master, digital input or digital output |
| Pin 2 operating modes | Digital input or digital output |
| Digital input capability | Up to 16 channels |
| Digital output capability | Up to 16 channels |
| IO-Link port connections | 8 × A-coded M12, 5-pole |
| Digital signal voltage | 24 V DC |
| Digital input characteristic | Type 3 according to IEC 61131-2 |
| Digital input switching characteristic | High-side switching |
| Configurable digital input filter | 0.2–20 ms |
| Typical digital output current | 2 A per channel |
| Port supply via 1L | 1 A for IO-Link operation; up to 4 A for digital I/O operation |
| Fieldbus connections | 2 × D-coded M12, 4-pole |
| Ethernet interface standard | 10BASE-T / 100BASE-TX |
| Ethernet interface isolation | Potential-free |
| Ethernet autonegotiation | Supported |
| Ethernet autocrossover | Supported |
| Additional communication | Bluetooth and OPC UA server |
| Device visualisation | Integrated web server and compatible Android/iOS application |
| Configurable parameters | Input filter, output current and temperature |
| Diagnostic functions | Undervoltage, overcurrent, overload and overtemperature |
| Nominal supply voltage | 24 V DC |
| Permissible supply voltage | 18–31.2 V DC |
| Supply circuit | 1L |
| Power supply connections | 2 × L-coded M12, 5-pole |
| Maximum supply current | 16 A per supply line |
| Supply protection | Overload and short-circuit protection |
| Reverse-polarity protection | Yes |
| Protection rating | IP67 |
| Mounting type | Direct machine mounting |
| Housing format | WideLine |
| Dimensions (W × H × D) | 60 × 30 × 210 mm |
| Weight | Approx. 610 g |
| Housing colour | Silver |
| GTIN / EAN | 4066966063189 |
The WAGO 765-4501/100-000 is an 8-port IO-Link Master Class A used to connect compatible intelligent sensors and actuators to an EtherNet/IP industrial automation network. It supports process data exchange, device parameterisation and diagnostics in decentralised machine control systems.
The module provides eight independent IO-Link master ports through eight 5-pole A-coded M12 connectors. Each port supports one compatible IO-Link device, allowing communication with up to eight IO-Link devices simultaneously.
IO-Link Class A uses the standard IO-Link communication and device power arrangement, making it suitable for many intelligent industrial sensors. Class B adds a dedicated auxiliary supply for compatible devices requiring additional actuator power. The WAGO 765-4501/100-000 is a Class A master, with configurable digital I/O functionality on pins 2 and 4 rather than a dedicated Class B auxiliary supply.
Yes. In addition to IO-Link master functionality, the module supports configurable digital input/output operation. Pin 4 of each port can operate as IO-Link, digital input or digital output, while pin 2 can operate as a digital input or output. This provides up to 16 digital I/O channels when configured for conventional digital operation.
Yes. The module features an IP67-rated WideLine enclosure designed for direct machine mounting. Its dimensions are 60 × 30 × 210 mm. Suitable M12 connectors, protective caps and installation practices are required to maintain the specified protection rating.
WAGO I/O System Field modules provide machine builders, automation engineers and system integrators with reliable decentralised connectivity for intelligent industrial equipment. The WAGO 765-4501/100-000 combines eight IO-Link Class A master ports, configurable digital I/O, EtherNet/IP communication, advanced diagnostics and IP67 protection in a robust WideLine enclosure, supporting efficient sensor integration and dependable industrial automation.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.