Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£305.58
The WAGO 765-4103/100-000 is a compact, industrial-grade 4-port IO-Link Master Class A with PROFINET communication, designed for decentralised automation, intelligent sensor integration and reliable field-level connectivity. Part of the WAGO I/O System Field, Series 765 SlimLine, this module enables intelligent IO-Link devices to communicate directly with compatible PROFINET controllers.
Featuring four independent IO-Link Class A ports with 5-pole A-coded M12 connections, the WAGO 765-4103/100-000 supports intelligent sensors, actuators and IO-Link hubs. Its flexible port configuration also enables conventional digital input and output operation, providing up to eight configurable digital I/O channels when used in digital I/O mode. Digital outputs support a typical current of 2 A per channel, subject to the module's port and supply limits.
The module supports IO-Link specification V1.1, a minimum communication cycle time of 400 µs and PROFINET IO networking through two D-coded M12 Ethernet interfaces. Integrated diagnostics, Bluetooth connectivity, an OPC UA server and web-based visualisation provide additional monitoring capabilities. With its IP67-rated enclosure, narrow 35 mm SlimLine housing and operating temperature range of −25 to +70 °C, it is suitable for installation directly on industrial machinery.
The WAGO 765-4103/100-000 provides a direct communication interface between intelligent IO-Link sensors and actuators and a higher-level PROFINET controller. IO-Link technology enables compatible field devices to exchange process data, diagnostic information and configuration parameters, extending industrial automation beyond conventional binary switching signals.
Its four IO-Link Class A master ports support intelligent field devices through standard A-coded M12 connections. Each port can operate as an IO-Link communication interface, while the configurable digital I/O functionality provides additional flexibility for conventional sensors and actuators. On each port, pin 4 can be configured for IO-Link communication, digital input or digital output, while pin 2 can be configured as a digital input or output. This allows the module to provide up to eight digital I/O channels when operating in digital mode.
IO-Link Class A is designed primarily for compatible sensors and devices powered through the standard IO-Link supply arrangement. Unlike Class B, Class A does not provide a dedicated auxiliary actuator supply on the additional connector pins. This makes the WAGO 765-4103/100-000 particularly suitable for intelligent sensing applications and compact machinery where a separate Class B auxiliary power circuit is not required.
For industrial networking, the module incorporates two D-coded M12 PROFINET interfaces and an integrated two-port Ethernet switch. Support for LLDP, Media Redundancy Protocol (MRP) and SNMP helps engineers integrate the module into managed industrial Ethernet architectures. Its PROFINET IO functionality enables communication with compatible PLCs and industrial controllers.
Integrated diagnostic functions help identify undervoltage, overcurrent, overload and overtemperature conditions. Additional access to supported device information is available through the integrated web server, OPC UA server and Bluetooth interface, helping simplify commissioning, troubleshooting and maintenance.
With its compact 35 × 30 × 210 mm SlimLine enclosure and IP67 protection rating, the WAGO 765-4103/100-000 can be installed directly on industrial machinery using suitable mounting hardware and M12 connections. This decentralised design helps reduce wiring complexity, supports modular machine architectures and brings intelligent sensor connectivity closer to the production process.
| Degree of protection (IP) | IP67 |
|---|---|
| Suitable for rail mounting | Yes |
| Supply voltage DC | 24 – 24 V |
| Voltage type (supply voltage) | DC |
| Supporting protocol for PROFINET IO | Yes |
| Height | 30 mm |
| Depth | 210 mm |
| Number of interfaces PROFINET | 2 |
| System accessory | Yes |
| SIL according to IEC 61508 | None |
| IO link master | Yes |
| Radio standard Bluetooth | Yes |
| Number of functions | 2 |
| Explosion safety category for gas | None |
| Explosion safety category for dust | None |
| Width | 35 mm |
| Performance level according to EN ISO 13849-1 | None |
| Manufacturer | WAGO |
| Series | I/O System Field, Series 765 |
| Product line | SlimLine |
| Model | 765-4103/100-000 |
| Product designation | 4-Port IO-Link Master Class A; PROFINET; 24 V DC / 2 A; 4 × M12 |
| Product type | Decentralised IO-Link master module |
| Fieldbus protocol | PROFINET IO |
| Fieldbus device function | PROFINET IO Device |
| Number of IO-Link master ports | 4 |
| IO-Link master classification | Class A |
| IO-Link specification | V1.1 |
| Minimum IO-Link cycle time | 400 µs |
| IO-Link configuration modes | Automatic, manual and tool-based |
| Pin 4 operating modes | IO-Link master, digital input or digital output |
| Pin 2 operating modes | Digital input or digital output |
| Digital input capability | Up to 8 channels |
| Digital output capability | Up to 8 channels |
| IO-Link port connections | 4 × A-coded M12, 5-pole |
| Digital signal voltage | 24 V DC |
| Digital input characteristic | Type 3 according to IEC 61131-2 |
| Digital input switching characteristic | High-side switching |
| Configurable digital input filter | 0.2–20 ms |
| Typical digital output current | 2 A per channel |
| Port supply current via 1L | 1 A for IO-Link operation; up to 4 A for digital I/O operation |
| Fieldbus connections | 2 × D-coded M12, 4-pole |
| Ethernet interface standard | 10BASE-T / 100BASE-TX |
| Ethernet interface | Potential-free |
| Ethernet autonegotiation | Supported |
| Ethernet autocrossover | Supported |
| Integrated Ethernet switch | 2-port |
| PROFINET network functions | LLDP, MRP and SNMP |
| Additional communication | Bluetooth and OPC UA server |
| Device visualisation | Integrated web server and compatible Android/iOS application |
| Configurable parameters | Input filter, output current and temperature |
| Diagnostic functions | Undervoltage, overcurrent, overload and overtemperature |
| Nominal supply voltage | 24 V DC |
| Permissible supply voltage | 18–31.2 V DC |
| Supply circuit | 1L |
| Power supply connections | 2 × L-coded M12, 5-pole |
| Maximum supply current | 16 A per supply line |
| Supply protection | Overload and short-circuit protection |
| Reverse-polarity protection | Yes |
| Protection rating | IP67 |
| Operating temperature | −25 to +70 °C |
| Mounting type | Direct machine mounting |
| Housing format | SlimLine |
| Dimensions (W × H × D) | 35 × 30 × 210 mm |
| Weight | Approx. 380 g |
| Housing colour | Silver |
| RoHS compliance | Compliant |
| Country of origin | Germany |
| Pack quantity | 1 piece |
The WAGO 765-4103/100-000 is a 4-port IO-Link Master Class A used to connect compatible intelligent sensors and actuators to a PROFINET industrial automation network. It enables process data exchange, device parameterisation and diagnostics in decentralised machine control systems.
The module provides four independent IO-Link master ports through four 5-pole A-coded M12 connectors. Each port supports one compatible IO-Link device, allowing communication with up to four IO-Link devices simultaneously. The ports can also be configured for conventional digital input/output operation.
IO-Link Class A uses the standard IO-Link communication and device power arrangement, making it suitable for many intelligent industrial sensors. Class B adds a separate auxiliary power supply for compatible devices requiring additional actuator power. The WAGO 765-4103/100-000 is a Class A master, with configurable digital I/O functionality on pins 2 and 4 rather than a dedicated Class B auxiliary supply.
Yes. In addition to IO-Link master functionality, the module supports configurable digital input/output operation. Pin 4 of each port can be configured for IO-Link, digital input or digital output operation, while pin 2 can operate as a digital input or output. This provides up to eight digital I/O channels when configured for conventional digital operation.
Yes. The module features an IP67-rated SlimLine enclosure designed for direct machine mounting. Its dimensions are 35 × 30 × 210 mm, and it supports operation between −25 and +70 °C. Suitable M12 connectors, protective caps and installation practices are required to maintain the specified protection rating.
WAGO I/O System Field modules provide machine builders, automation engineers and system integrators with reliable decentralised connectivity for intelligent industrial equipment. The WAGO 765-4103/100-000 combines four IO-Link Class A master ports, configurable digital I/O, PROFINET communication, advanced diagnostics and IP67 protection in a compact SlimLine enclosure, supporting efficient sensor integration and dependable industrial automation.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.