Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£101.24
The WAGO 765-2704/200-000 is a compact, industrial-grade 2-channel analogue output IO-Link converter designed to integrate conventional 0–10 V DC actuators and control devices into modern IO-Link automation systems. Part of the WAGO I/O System Field 765 series, this converter transforms digital process data received from a compatible IO-Link master into two independent analogue voltage output signals.
Featuring two 0–10 V DC analogue outputs, the WAGO 765-2704/200-000 enables precise control of compatible actuators, variable-speed drives, proportional control devices and other equipment requiring analogue voltage setpoints. The module supports IO-Link version 1.1, COM2 communication at 38.4 kBaud and two 16-bit analogue output process data values, providing a practical interface between digital automation networks and conventional analogue equipment.
With an IP67-rated polyamide housing, two A-coded M12 connections and compact dimensions of 30 × 63 × 24 mm, the converter is designed for decentralised installation close to industrial equipment. Its 24 V DC supply, operating temperature range of −25 to +70 °C and integrated status indicators make it suitable for industrial machinery, process automation and equipment modernisation projects.
The WAGO 765-2704/200-000 provides a practical interface between IO-Link automation systems and conventional equipment requiring analogue voltage control. By converting two digital setpoint values from an IO-Link master into independent 0–10 V DC outputs, the converter allows compatible actuators and control devices to remain in service while benefiting from modern digital communication and parameterisation capabilities.
Its compact IP67-rated housing allows the converter to be positioned close to connected equipment, reducing the need for long analogue signal cable runs. The IO-Link interface provides access to process and diagnostic data and supports device identification parameters, while integrated LEDs simplify local status checking. These features make the converter suitable for new automation installations and the modernisation of existing machinery using conventional analogue control signals.
| System accessory | Yes |
|---|---|
| SIL according to IEC 61508 | None |
| Power consumption | 1 W |
| Voltage type (supply voltage) | DC |
| Explosion safety category for gas | None |
| Explosion safety category for dust | None |
| Performance level according to EN ISO 13849-1 | None |
| Manufacturer | WAGO |
| Series | I/O System Field 765 |
| Part number | 765-2704/200-000 |
| Manufacturer order description | 2AO FLD IOL CONV 0-10V |
| Product type | Two-channel analogue output IO-Link converter |
| Operating mode | IO-Link |
| Communication interface | IO-Link Class A/B |
| IO-Link version | 1.1 |
| Transmission mode | COM2 |
| Communication speed | 38.4 kBaud |
| Process data | 2 × 16-bit OUT (analogue) |
| Minimum IO-Link cycle time | 3.6 ms |
| Number of analogue outputs | 2 |
| Output signal type | Voltage |
| Analogue output range | 0–10 V DC |
| Specified load impedance | ≤ 3 kΩ |
| Accuracy at +25 °C | 0.25% of output range end value |
| Nominal supply voltage | 24 V DC |
| Permissible supply voltage | 18–30 V DC |
| Maximum current consumption | 300 mA |
| IO-Link connection | 1 × M12 male connector, A-coded, 4-pole |
| Analogue output connection | 1 × M12 female connector, A-coded, 5-pole |
| IO-Link connector pin 1 | +24 V DC supply (1L+) |
| IO-Link connector pin 3 | 0 V supply (1L−) |
| IO-Link connector pin 4 | C/Q communication |
| Analogue output connector pin 1 | Actuator supply 1L+ |
| Analogue output connector pin 2 | Analogue output 2, 0–10 V |
| Analogue output connector pin 3 | Actuator supply 1L− |
| Analogue output connector pin 4 | Analogue output 1, 0–10 V |
| Analogue output connector pin 5 | Not used |
| Parameterisable functions | Application-specific identifier, system identifier, location identifier |
| Analogue output indicators | 2 × yellow LED |
| Power indicator | 1 × green LED |
| Housing material | Polyamide (PA) |
| Protection rating | IP67 |
| Operating temperature | −25 to +70 °C |
| Storage temperature | −25 to +70 °C |
| Operating altitude | 0–4000 m |
| Pollution degree | 2 |
| Maximum connection cable length | 20 m |
| Width | 30 mm |
| Height | 63 mm |
| Depth | 24 mm |
| Dimensions (W × H × D) | 30 × 63 × 24 mm |
| Weight | 91 g |
| Conformity markings | CE, UKCA |
| Compatible mounting accessory | WAGO 765-101/000-000 |
| GTIN | 4066966322132 |
The WAGO 765-2704/200-000 is a two-channel analogue output IO-Link converter that receives digital process values from a compatible IO-Link master and converts them into two independent 0–10 V DC analogue output signals for controlling compatible industrial equipment.
The converter provides two analogue voltage outputs, each operating over a 0–10 V DC range. The outputs are available through a single 5-pole, A-coded M12 female connector.
The WAGO 765-2704/200-000 supports IO-Link version 1.1 with COM2 communication at 38.4 kBaud. It exchanges two 16-bit analogue output values and has a minimum IO-Link cycle time of 3.6 ms.
The converter operates from a nominal 24 V DC supply, with a permissible voltage range of 18–30 V DC. Its maximum specified current consumption is 300 mA.
Yes. The converter features an IP67-rated polyamide housing, compact dimensions of 30 × 63 × 24 mm and an operating temperature range of −25 to +70 °C. It is suitable for decentralised machine-mounted installation when the connectors are correctly secured and environmental requirements are observed.
WAGO I/O System Field analogue converters help automation engineers, machine builders and maintenance professionals integrate conventional analogue equipment into IO-Link architectures, supporting flexible machine design, decentralised connectivity and efficient equipment modernisation.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.