Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£91.03
The WAGO 765-2701/200-000 is a compact and reliable 1-channel analogue input IO-Link converter designed for decentralised signal monitoring, processing and communication in industrial automation systems. Supporting a 4–20 mA analogue current input, this converter enables conventional analogue sensors to communicate with modern IO-Link automation networks. As part of the advanced WAGO I/O System Field 765 series, it provides flexible integration of analogue measurement signals into intelligent industrial control architectures.
The converter combines analogue signal acquisition, local measurement display and configurable switching functionality in a robust field-mounted device. Its integrated red/green 7-segment LED display allows operators to monitor measured values directly at the installation point, while IO-Link communication provides access to process data, diagnostics and configurable operating parameters. This makes the device particularly suitable for modernising existing sensor installations and improving visibility across industrial processes.
Featuring a 24 V DC nominal supply, IO-Link version 1.1 and IP67 protection, the WAGO 765-2701/200-000 is designed for reliable operation in demanding industrial environments. Its two M12 connections provide straightforward integration with compatible analogue sensors and IO-Link masters, while support for both IO-Link and standalone operation offers additional flexibility for machinery manufacturers, system integrators and maintenance engineers.
The WAGO 765 IO-Link converter series is designed to bridge conventional analogue sensor technology and modern digital automation networks. By converting analogue measurement signals into IO-Link process data, these devices allow existing sensors to communicate with IO-Link masters and higher-level automation controllers without requiring the replacement of established measurement equipment.
The WAGO 765-2701/200-000 is particularly useful for monitoring industrial transmitters that provide standard 4–20 mA signals. In IO-Link mode, the converter communicates measurement values and diagnostic information to a compatible IO-Link master, allowing connected PLCs and automation systems to process sensor data. Its integrated display supports local monitoring, while configurable switching thresholds and output functions provide additional control possibilities.
The converter can also operate independently of an IO-Link master in standalone mode. In this configuration, the device evaluates the measured current against configured switching limits and controls its switching output accordingly. Together with its robust IP67 housing, M12 connectivity and flexible parameterisation options, this makes the 765 series suitable for decentralised automation, machinery upgrades and industrial condition monitoring.
| Analogue inputs configurable | Yes |
|---|---|
| Analogue outputs configurable | Yes |
| System accessory | Yes |
| SIL according to IEC 61508 | None |
| Resolution of the analogue outputs | 10 bit |
| Output signal configurable | Yes |
| Degree of protection (IP) | IP67 |
| Number of analogue outputs | 1 |
| Power consumption | 1 W |
| Output, current | Yes |
| Number of analogue inputs | 1 |
| Resolution of the analogue inputs | 16 bit |
| Supply voltage DC | 18 – 30 V |
| Output, voltage | Yes |
| Input, current | Yes |
| Voltage type (supply voltage) | DC |
| Explosion safety category for gas | None |
| Explosion safety category for dust | None |
| Height | 63 mm |
| Performance level according to EN ISO 13849-1 | None |
| Width | 30 mm |
| Depth | 24 mm |
| Manufacturer | WAGO |
| Series | I/O System Field 765 |
| Model | 765-2701/200-000 |
| Product type | IO-Link analogue input converter |
| Analogue input signal | 4–20 mA |
| Nominal supply voltage | 24 V DC |
| Operating voltage range | 18–30 V DC |
| Communication interface | IO-Link |
| IO-Link version | 1.1 |
| IO-Link class | Class A |
| Transmission mode | COM2 |
| Communication speed | 38.4 kBaud |
| Minimum cycle time | 3.2 ms |
| Measurement accuracy | 0.5% at 25 °C |
| Operating modes | IO-Link / SIO |
| Digital outputs | 1 configurable switching output |
| Analogue outputs | 1 analogue signal output |
| Process data | 1 × 16-bit analogue input and 1 × 16-bit digital input |
| Sensor connection | M12 A-coded socket, 5-pole |
| IO-Link connection | M12 A-coded plug, 4-pole |
| Display | Red/green 7-segment LED display |
| Status indication | Power and digital output LEDs |
| Configurable functions | Switching points, switching delays, hysteresis, window monitoring and display scaling |
| Protection rating | IP67 |
| Operating temperature | −20 to +60 °C; up to +70 °C with display switched off |
| Storage temperature | −25 to +70 °C |
| Pollution degree | 3 |
| Operating altitude | 0–2000 m |
| Installation type | Decentralised field mounting |
| Configuration | Integrated controls or compatible IO-Link configuration software |
The WAGO 765-2701/200-000 is a 1-channel analogue input IO-Link converter designed to monitor 4–20 mA signals from industrial sensors and make measurement data available to IO-Link automation systems. It can also provide local measurement indication and configurable switching functionality.
The converter supports a standard 4–20 mA analogue current input, commonly used by industrial pressure, temperature, level and flow transmitters.
The converter operates from a nominal 24 V DC supply, with a supported operating voltage range of 18–30 V DC.
Yes. The device supports IO-Link version 1.1 with COM2 communication at 38.4 kBaud. When connected to a compatible IO-Link master, it can transmit measurement and diagnostic data and support remote parameter configuration.
Yes. The converter supports standalone SIO operation, allowing it to evaluate analogue measurement values and operate its configurable switching output without active IO-Link communication.
Yes. The device features an integrated red/green 7-segment LED display for local measurement indication. Display scaling and colour-related functions can be configured to suit the application.
Yes. Its IP67 protection rating and industrial M12 connections make it suitable for decentralised field-level installations when correctly connected and installed according to the manufacturer's requirements.
The converter can be parameterised using its integrated controls or through compatible IO-Link configuration tools, including the WAGO IO-Link Configurator. Configurable functions include switching thresholds, delays and display scaling.
WAGO I/O System Field products provide industrial automation engineers, machine builders and system integrators with flexible solutions for decentralised signal acquisition and communication. The WAGO 765-2701/200-000 combines reliable 4–20 mA measurement, IO-Link connectivity and local monitoring to support efficient sensor integration in modern industrial control systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.