Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£323.23
The WAGO 765-1503/100-000 is a robust and versatile 16-channel EtherNet/IP digital output module designed for decentralised industrial automation and reliable control of field-level actuators. As part of the WAGO I/O System Field, Series 765 WideLine, it provides a compact, machine-mountable solution for connecting digital output devices directly to industrial Ethernet networks without requiring extensive wiring to centralised control cabinets.
Featuring 16 digital outputs operating at 24 V DC, with a typical output current of 2 A per channel, the WAGO 765-1503/100-000 is designed to control compatible industrial actuators such as solenoid valves, contactors, signal indicators and other switching devices. Its eight 5-pole A-coded M12 connectors provide two digital output channels per port, simplifying field wiring and supporting efficient installation on industrial machinery.
The module incorporates EtherNet/IP communication through two D-coded M12 Ethernet connections, supporting industrial networking functions including BOOTP, DHCP and Device Level Ring (DLR). With a nominal 24 V DC power supply, an IP67-rated enclosure and a wide operating temperature range, the WAGO 765-1503/100-000 is suitable for demanding industrial automation environments where reliable actuator control and decentralised connectivity are essential.
The WAGO I/O System Field is designed to bring industrial input/output connectivity closer to sensors and actuators, reducing the need for extensive wiring between machinery and centralised control cabinets. The WAGO 765-1503/100-000 provides 16 digital output channels, enabling a higher-level EtherNet/IP controller to switch compatible industrial field devices through a robust, decentralised module.
The module uses eight A-coded M12 connectors, each providing two digital output channels. This arrangement simplifies the connection of solenoid valves, contactors, signalling devices and other compatible industrial loads. The 2 A typical output current per channel supports a wide range of actuator applications, subject to the maximum current ratings of the individual ports and supply circuits.
For industrial communication, the WAGO 765-1503/100-000 incorporates two D-coded M12 Ethernet connections and supports EtherNet/IP, an industrial Ethernet protocol widely used for communication between PLCs, remote I/O devices and industrial control equipment. Support for BOOTP and DHCP simplifies network configuration, while Device Level Ring (DLR) functionality enables integration into compatible ring network architectures.
The module features separate 1L and 2L power supply circuits and two L-coded M12 power connectors for industrial power distribution. Its supply design incorporates reverse-polarity, overload and short-circuit protection, helping improve reliability in industrial automation installations. Diagnostic functions and device status indicators assist maintenance engineers with identifying network, supply and output operating conditions.
With its IP67-rated enclosure, compact WideLine construction and operating temperature range of −25 to +70 °C, the module is designed for direct installation on industrial machinery. Its rugged construction and M12 connection technology help reduce wiring complexity while supporting dependable decentralised actuator control in demanding manufacturing environments.
| System accessory | Yes |
|---|---|
| Wall mounting/direct mounting | Yes |
| Number of HW-interfaces industrial Ethernet | 2 |
| SIL according to IEC 61508 | None |
| Degree of protection (IP) | IP67 |
| Radio standard Bluetooth | Yes |
| Number of digital outputs | 16 |
| Supply voltage DC | 24 – 24 V |
| Voltage type (supply voltage) | DC |
| Input current at signal 1 | 16000 mA |
| Supporting protocol for EtherNet/IP | Yes |
| Type of electric connection | Plug-in connection |
| Output current | 2 A |
| Explosion safety category for gas | None |
| Explosion safety category for dust | None |
| Height | 30 mm |
| Width | 60 mm |
| Performance level according to EN ISO 13849-1 | None |
| Digital outputs configurable | Yes |
| Type of voltage (input voltage) | DC |
| Depth | 210 mm |
| Manufacturer | WAGO |
| Series | I/O System Field, Series 765 |
| Product line | WideLine |
| Model | 765-1503/100-000 |
| Product designation | 16-channel digital output; EtherNet/IP; 24 V DC / 2.0 A; 8 × M12 |
| Product type | Decentralised industrial digital output module |
| Fieldbus protocol | EtherNet/IP |
| Digital signal voltage | 24 V DC |
| Typical output current per channel | 2 A |
| Maximum supply current per output port | 4 A via 2L |
| I/O connection technology | 8 × A-coded M12, 5-pole |
| Output channels per connector | 2 |
| Fieldbus connection technology | 2 × D-coded M12, 4-pole |
| Ethernet interface standard | 10BASE-T / 100BASE-TX |
| Ethernet interface isolation | Potential-free |
| Ethernet autonegotiation | Supported |
| Ethernet autocrossover | Supported |
| Network configuration | BOOTP and DHCP |
| Network redundancy | Device Level Ring (DLR) |
| Nominal supply voltage | 24 V DC |
| Permissible supply voltage | 18–31.2 V DC |
| Supply circuits | 1L / 2L |
| Power supply connections | 2 × L-coded M12, 5-pole |
| Maximum supply current | 16 A per supply line |
| Supply protection | Overload and short-circuit protection |
| Reverse-polarity protection | Yes |
| Protection rating | IP67 |
| Protection class | III according to EN 61140 |
| Operating temperature | −25 to +70 °C |
| Storage temperature | −40 to +80 °C |
| Relative humidity | Up to 95%, non-condensing |
| Operating altitude | 0–2,000 m |
| Pollution degree | 3 according to EN 60664-1 |
| Overvoltage category | II according to EN 60664-1 |
| Vibration resistance | 5 g according to IEC 60068-2-6 |
| Short-term shock resistance | 50 g / 11 ms, half-sine |
| Long-term shock resistance | 30 g / 6 ms, half-sine |
| EMC immunity | EN 61000-6-2 |
| EMC emissions | EN 61000-6-4 |
| Mounting type | Direct machine mounting |
| Dimensions (W × H × D) | 60 × 30 × 210 mm |
| Weight | Approx. 610 g |
| Housing colour | Silver |
| Packaging type | Box |
| Pack quantity | 1 piece |
The WAGO 765-1503/100-000 is a 16-channel EtherNet/IP digital output module used to control compatible industrial actuators and switching devices. It is designed for decentralised automation applications where output signals are controlled by a higher-level PLC or industrial controller.
The module provides 16 digital output channels through eight 5-pole A-coded M12 connectors. Each connector accommodates two output channels operating at 24 V DC, with a typical output current of 2 A per channel, subject to the applicable port and supply limits.
The module operates from a nominal 24 V DC power supply and supports an input voltage range of 18–31.2 V DC. It features two L-coded M12 power connections, separate 1L and 2L supply circuits, and reverse-polarity, overload and short-circuit protection.
The WAGO 765-1503/100-000 communicates using EtherNet/IP through two D-coded M12 Ethernet connections. It supports BOOTP, DHCP and Device Level Ring (DLR) functions, making it suitable for integration into compatible industrial Ethernet networks and PLC control systems.
Yes. The module features an IP67-rated enclosure designed for direct machine mounting. Its compact 60 × 30 × 210 mm construction and operating temperature range of −25 to +70 °C make it suitable for demanding industrial environments when installed correctly with appropriate M12 connectors and cables.
WAGO I/O System Field modules provide automation engineers, machine builders and system integrators with reliable decentralised connectivity for modern industrial equipment. The WAGO 765-1503/100-000 combines 16 digital outputs, EtherNet/IP communication, robust M12 connectivity and IP67 protection to deliver flexible actuator control and dependable operation in demanding industrial automation applications.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.