Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£288.86
The WAGO 765-1104/100-000 is a compact and robust 8-channel PROFINET digital input/output module designed for decentralised industrial automation, sensor monitoring and actuator control. As part of the advanced WAGO I/O System Field, Series 765 SlimLine, it provides a flexible solution for connecting digital field devices directly to industrial Ethernet networks without requiring extensive wiring to centralised control cabinets.
Featuring 8 configurable digital input/output channels operating at 24 V DC, the WAGO 765-1104/100-000 enables automation systems to monitor sensors and control compatible industrial actuators. The module supports a typical digital output current of 2 A per channel and incorporates four 5-pole A-coded M12 connectors, each accommodating two digital I/O channels. Its compact SlimLine construction makes it particularly suitable for machinery with limited installation space.
The module features PROFINET IO communication through two D-coded M12 Ethernet interfaces, an integrated two-port switch and industrial networking functions including LLDP, MRP and SNMP. Operating from a nominal 24 V DC supply, the module combines an IP67-rated enclosure, integrated diagnostics and an operating temperature range of −25 to +70 °C for reliable operation in demanding industrial environments.
The WAGO I/O System Field is designed to bring industrial input/output connectivity closer to sensors and actuators, reducing the need for extensive wiring between machinery and centralised control cabinets. The WAGO 765-1104/100-000 provides 8 configurable digital I/O channels, allowing a higher-level PROFINET controller to monitor digital sensor signals and control compatible field devices through a single compact module.
The module uses four A-coded M12 connectors, each accommodating two digital input/output channels. This arrangement simplifies the connection of industrial sensors, switches, solenoid valves and other compatible devices. The Type 3 digital input characteristics and configurable input filter support reliable signal acquisition, while the high-side switching outputs provide up to 2 A typical current per channel for compatible loads, subject to the applicable port and supply limits.
For industrial networking, the WAGO 765-1104/100-000 incorporates two D-coded M12 PROFINET connections and an integrated two-port Ethernet switch. Support for LLDP, Media Redundancy Protocol (MRP) and SNMP enables integration into managed industrial networks, while the PROFINET IO interface supports communication with compatible PLCs and automation controllers.
Advanced diagnostic functions help engineers monitor device status and identify operating problems. The module supports undervoltage, overcurrent, overload and overtemperature diagnostics, together with configurable operating parameters. Its integrated OPC UA server, web server and Bluetooth connectivity provide additional access to supported diagnostic and monitoring functions using compatible engineering tools and mobile devices.
The SlimLine enclosure measures just 35 mm wide, making the module particularly suitable for compact industrial machinery and installations with limited mounting space. Its robust die-cast zinc construction, IP67 protection and operating temperature range of −25 to +70 °C support reliable operation in demanding industrial environments when installed with suitable connectors and cables.
| Number of interfaces PROFINET | 2 |
|---|---|
| Digital inputs configurable | Yes |
| System accessory | Yes |
| Wall mounting/direct mounting | Yes |
| SIL according to IEC 61508 | None |
| Number of digital inputs | 8 |
| Type of output voltage | DC |
| Degree of protection (IP) | IP67 |
| Radio standard Bluetooth | Yes |
| Number of digital outputs | 8 |
| Supply voltage DC | 24 – 24 V |
| Voltage type (supply voltage) | DC |
| Input current at signal 1 | 4000 mA |
| Supporting protocol for PROFINET IO | Yes |
| Type of electric connection | Plug-in connection |
| Output current | 2 A |
| Explosion safety category for gas | None |
| Explosion safety category for dust | None |
| Height | 30 mm |
| Time delay at signal change | 0.2 – 20 ms |
| Width | 35 mm |
| Performance level according to EN ISO 13849-1 | None |
| Permitted voltage at input | -3 – 30 V |
| Digital outputs configurable | Yes |
| Type of voltage (input voltage) | DC |
| Depth | 210 mm |
| Manufacturer | WAGO |
| Series | I/O System Field, Series 765 |
| Product line | SlimLine |
| Model | 765-1104/100-000 |
| Product designation | 8-channel digital input/output; PROFINET; 24 V DC / 2.0 A; 4 × M12 |
| Product type | Decentralised digital input/output module |
| Fieldbus protocol | PROFINET IO |
| PROFINET device type | PROFINET IO Device |
| Number of digital I/O channels | 8 configurable channels |
| Number of supported digital inputs | 8 |
| Number of supported digital outputs | 8 |
| Digital signal voltage | 24 V DC |
| Digital input characteristic | Type 3 according to IEC 61131-2 |
| Digital input filter | 0.2–20 ms |
| Digital output type | High-side switching transistor output |
| Typical output current per channel | 2 A |
| Maximum supply current per I/O port | 4 A |
| I/O connection technology | 4 × A-coded M12, 5-pole |
| I/O channels per connector | 2 |
| Fieldbus connection technology | 2 × D-coded M12, 4-pole |
| Ethernet standard | 10BASE-T / 100BASE-TX |
| Ethernet interface | Potential-free |
| Ethernet autonegotiation | Supported |
| Ethernet autocrossover | Supported |
| Integrated Ethernet switch | 2-port |
| Network functions | LLDP, MRP, SNMP |
| Additional communication | Bluetooth and OPC UA server |
| Device visualisation | Integrated web server and compatible Android/iOS application |
| Configurable parameters | Input filter, output current and temperature |
| Diagnostic functions | Undervoltage, overcurrent, overload and overtemperature |
| Nominal supply voltage | 24 V DC |
| Permissible supply voltage | 18–31.2 V DC |
| Supply circuits | 1L / 2L |
| Power supply connections | 2 × L-coded M12, 5-pole |
| Maximum supply current | 16 A per supply line |
| Power supply protection | Overload and short-circuit protection |
| Reverse-polarity protection | Yes |
| Protection rating | IP67 |
| Operating temperature | −25 to +70 °C |
| Mounting type | Direct machine mounting with screws |
| Mounting screws | 2 × M4 |
| Recommended mounting torque | 1.2 Nm |
| Mounting hole diameter | 4.5 mm |
| Mounting hole spacing | 198 mm |
| Housing material | Die-cast zinc |
| Dimensions (W × H × D) | 35 × 30 × 210 mm |
| Weight | Approx. 358.6 g |
| RoHS compliance | Compliant |
| Country of origin | Germany |
| GTIN / EAN | 4055143949774 |
The WAGO 765-1104/100-000 is an 8-channel PROFINET digital input/output module used to monitor industrial sensors and control compatible actuators. It is designed for decentralised automation systems where field devices communicate with a higher-level PLC or industrial controller.
The module provides 8 configurable digital I/O channels through four 5-pole A-coded M12 connectors. The channels support digital input or output operation, with a typical output current of 2 A per channel when configured as outputs.
The module operates from a nominal 24 V DC supply and supports a voltage range of 18–31.2 V DC. It features two L-coded M12 power connections for supply input and power forwarding, with reverse-polarity, overload and short-circuit protection.
The WAGO 765-1104/100-000 communicates using PROFINET IO through two D-coded M12 Ethernet connections. Its integrated two-port switch supports LLDP, MRP and SNMP. The module also includes Bluetooth connectivity, an OPC UA server and a web server for supported diagnostic and monitoring functions.
Yes. The module features an IP67-rated die-cast zinc enclosure designed for direct machine mounting. Its compact SlimLine construction measures 35 × 30 × 210 mm and supports operation between −25 and +70 °C, making it suitable for demanding industrial installations when correctly mounted and connected.
WAGO I/O System Field modules provide automation engineers, machine builders and system integrators with reliable decentralised connectivity for modern industrial equipment. The WAGO 765-1104/100-000 combines eight configurable digital I/O channels, PROFINET communication, advanced diagnostics and IP67 protection in a compact SlimLine enclosure, supporting efficient sensor monitoring, actuator control and dependable industrial automation.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.