Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£459.21
The WAGO 753-667/000-003 is a high-performance 4-channel fail-safe digital input and 4-channel fail-safe digital output module designed for safety-related industrial automation and machinery protection systems. As part of the WAGO I/O System 750/753, this module provides reliable monitoring and control of safety devices using PROFIsafe V2.0 iPar communication technology.
Designed for integration into distributed safety control systems, the WAGO 753-667/000-003 provides four safety-related digital inputs and four safety-related digital outputs. Its inputs support emergency stop switches, safety door contacts, operating mode selectors and compatible electronic safety sensors, while its outputs can control suitable safety-related actuators and switching devices.
Operating with a 24 V DC field supply and supporting output currents of up to 2 A per channel, the module combines configurable safety functions, comprehensive diagnostics and modular installation. Its PROFIsafe communication interface supports integration into compatible PROFIBUS and PROFINET safety networks, making it suitable for machinery safety, production line protection and distributed industrial automation.
The 753-667/000-003 is a discontinued manufacturer product, with WAGO identifying the 753-667/000-004 as an alternative. Replacement suitability should be verified against the existing safety configuration, controller compatibility and application requirements.
Safety-related digital input/output modules such as the WAGO 753-667/000-003 provide an essential interface between industrial safety controllers and machinery protection equipment. By monitoring emergency stop circuits, protective door switches and compatible safety sensors, the module enables safety-related input information to be communicated to a suitable safety controller through the PROFIsafe protocol.
The module's four fail-safe digital outputs provide controlled switching for compatible safety-related actuators and industrial loads. Each output supports up to 2 A, with configurable operating modes and diagnostic monitoring designed to detect relevant electrical faults. Integrated monitoring of short circuits, cross circuits and supply conditions helps support fault detection within properly designed safety systems.
The PROFIsafe V2.0 iPar functionality enables integration with compatible industrial safety networks and supports parameter management during module replacement. Configuration through WAGO-I/O-CHECK allows safety-related settings, including discrepancy times, filter parameters and test pulse behaviour, to be adapted to the requirements of the application.
The WAGO 753-667/000-003 can be used in systems designed to achieve SIL 3, Category 4 or PL e, subject to the complete safety architecture, approved components, configuration, risk assessment and validation. The module's safety capability does not independently establish the safety rating of the complete machine.
For protection against supply-side surge voltages according to IEC 61000-4-5, WAGO specifies the use of a suitable 750-626 filter module or external surge filter on the 24 V DC supply. Installation and configuration must follow the relevant WAGO product documentation and the requirements of the complete safety system.
| Manufacturer | WAGO |
|---|---|
| Series | WAGO I/O System 750/753 |
| Model | 753-667/000-003 |
| Product type | Fail-safe digital input/output module |
| Safety communication | PROFIsafe V2.0 iPar |
| Supported protocols | PROFIsafe V1 (PROFIBUS); PROFIsafe V2 (PROFIBUS/PROFINET) |
| Number of digital inputs | 4 |
| Number of digital outputs | 4 |
| Digital input designation | I1–I4 |
| Digital output designation | O1–O4 |
| Input type | Clock-sensitive digital safety inputs |
| Input classification | Type 1 according to IEC 61131 |
| Typical input current | 2.2 mA |
| Maximum input frequency | 50 Hz |
| Nominal field supply | 24 V DC |
| Field supply voltage range | 20.4–28.8 V DC |
| System supply | 5 V DC via internal bus |
| Typical internal current consumption | 180 mA |
| Typical field-side current consumption | 20 mA plus connected load |
| Rated output current per channel | 2 A |
| Total output current | 8 A |
| Maximum resistive load switching frequency | 50 Hz |
| Maximum inductive load switching frequency | 0.1 Hz |
| Capacitive load per output channel | 2.2 µF |
| Configurable test pulse duration | 0–500 ms |
| Output switching | Bipolar or unipolar |
| Sensor test outputs | 2 differently clocked outputs |
| Achievable safety integrity | SIL 3 |
| Achievable performance level | PL e |
| Achievable safety category | Category 4 |
| Safety standards | IEC 61508, EN ISO 13849-1 and EN 62061 |
| Configuration software | WAGO-I/O-CHECK |
| Parameter management | PROFIsafe iPar |
| PROFIsafe address setting | DIP switch or WAGO-I/O-CHECK |
| Protection rating | IP20 |
| Operating temperature | 0 to +55 °C |
| Mounting type | DIN rail mounting |
| Module width | 24 mm |
| Weight | Approx. 104.5 g |
| Connection technology | CAGE CLAMP spring connection with pluggable connector system |
| Supported conductor cross-section | 0.08–2.5 mm² |
| Supported conductor size | AWG 28–14 |
| Compatible I/O platform | WAGO I/O System 750/753 |
| Manufacturer status | Discontinued |
| Manufacturer-identified alternative | 753-667/000-004 |
| Connector note | The 753-667/000-003 electronics module is supplied without the pluggable field connector. |
The WAGO 753-667/000-003 is a fail-safe digital input/output module used for monitoring safety devices and controlling suitable safety-related outputs in industrial automation systems using PROFIsafe communication.
The module provides four fail-safe digital inputs and four fail-safe digital outputs, enabling safety-related monitoring and switching within compatible industrial safety control systems.
The module operates with a nominal 24 V DC field supply, supporting a field supply voltage range of 20.4–28.8 V DC. Its internal system electronics receive 5 V DC through the WAGO I/O system bus.
Each of the four digital output channels supports up to 2 A, providing a combined maximum output current of 8 A, subject to the module's operating conditions and load requirements.
The WAGO 753-667/000-003 supports PROFIsafe V1 over PROFIBUS and PROFIsafe V2 over PROFIBUS and PROFINET, enabling integration with compatible safety controllers and industrial communication networks.
The module supports safety applications designed to achieve up to SIL 3, Category 4 and PL e. The achievable safety level depends on the complete system design, connected equipment, configuration and validation.
Yes. Its fail-safe digital inputs can monitor compatible emergency stop contacts, protective door switches, operating mode selectors and electronic safety sensors as part of a correctly configured safety system.
The module can be configured using WAGO-I/O-CHECK, which supports PROFIsafe address configuration, operating modes, discrepancy times, filter times and diagnostic settings. The PROFIsafe address can also be set using the module's DIP switch.
No. The WAGO 753-667/000-003 has been discontinued. WAGO identifies the 753-667/000-004 as an alternative, although compatibility and safety-related replacement requirements must be checked before substitution.
No. The 753-667/000-003 electronics module is supplied without the pluggable field connector. Suitable 753 Series connector accessories must be obtained separately where required.
WAGO I/O System 750/753 safety modules provide flexible integration of safety-related monitoring and switching functions into industrial automation networks. The WAGO 753-667/000-003 combines four fail-safe inputs, four fail-safe outputs, PROFIsafe communication and configurable diagnostics to support dependable machinery protection and distributed functional safety applications when correctly engineered and validated.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.