Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£51.55
The WAGO 753-531/000-800 is a compact 4-channel digital output module designed for industrial automation, PLC control systems and distributed I/O applications. Part of the WAGO-I/O-SYSTEM 750/753, it provides four 24 V DC digital outputs rated at 0.5 A per channel, enabling compatible automation controllers to operate industrial actuators, relays, indicator lamps and other electrical loads.
The distinguishing feature of the /000-800 variant is its interference-free output design for safety function applications. The module combines this characteristic with high-side switching, short-circuit-protected outputs and reverse-voltage protection. Its four output channels are complemented by four 0 V connections, allowing direct connection of four compatible two-conductor actuators.
With a maximum switching frequency of 1 kHz, 500 V AC electrical isolation between field and system circuits and a compact 12 mm-wide housing, the WAGO 753-531/000-800 offers reliable digital switching in space-constrained control cabinets. Four green output status LEDs and removable WAGO 753 Series field connections simplify commissioning, maintenance and fault identification.
The WAGO 753-531/000-800 transfers digital switching commands from a compatible PLC or fieldbus coupler to connected industrial actuators. Its four high-side switching outputs apply the positive 24 V DC field supply to their respective loads when activated. Each channel is rated for 0.5 A, making the module suitable for appropriately rated relays, indicator lamps, solenoid coils and other industrial control devices.
The module uses a two-conductor connection arrangement with four output terminals and four corresponding 0 V connections. This allows four compatible actuators to be wired directly to the module, reducing the need for separate return terminals and supporting tidy, space-efficient control cabinet wiring.
The /000-800 interference-free variant is intended for control architectures requiring the manufacturer's specified interference-free behaviour in safety function applications. This characteristic must be assessed as part of the complete safety design. The module is not, by itself, a safety controller, and a specific Safety Integrity Level (SIL) or Performance Level (PL) must not be assumed without supporting system documentation and validation.
Each output incorporates short-circuit protection, while reverse-voltage protection provides additional resilience against incorrect polarity conditions. The specified 1.7 A short-circuit current and 0.3 J maximum inductive switch-off energy should be considered when designing the output circuits and selecting connected actuators.
The module also provides 500 V AC electrical isolation between the field and system levels, helping separate external load circuits from internal controller electronics. Four green LEDs indicate the output states, while the removable connector and compact DIN-rail housing simplify commissioning, troubleshooting and maintenance.
| System accessory | Yes |
|---|---|
| Type of output voltage | DC |
| Degree of protection (IP) | IP20 |
| Number of digital outputs | 4 |
| Supply voltage DC | 24 – 24 V |
| Suitable for rail mounting | Yes |
| Short-circuit protection, outputs available | Yes |
| Type of digital output | Other |
| Voltage type (supply voltage) | DC |
| Type of electric connection | Spring clamp connection |
| Output current | 0.5 A |
| Explosion safety category for gas | ATEX gas-ex-protection, Cat. 3G |
| Explosion safety category for dust | ATEX dust-ex-protection, Cat. 3D |
| Height | 100 mm |
| Width | 12 mm |
| Permitted voltage at output | 24 – 24 V |
| Fieldbus connection over separate bus coupler possible | Yes |
| Depth | 69.8 mm |
| Manufacturer | WAGO |
| Product number | 753-531/000-800 |
| Series | WAGO-I/O-SYSTEM 750/753 |
| Product type | Digital output module |
| Special variant | Interference-free |
| Interference-free for safety function applications | Yes |
| Total number of channels | 4 |
| Signal type | Digital |
| Nominal output voltage | 24 V DC |
| Output characteristic | High-side switching |
| Output current per channel | 0.5 A |
| Output protection | Short-circuit-protected |
| Short-circuit current | 1.7 A |
| Reverse-voltage protection | Yes |
| Maximum switching frequency | 1 kHz |
| Supported load types | Resistive, inductive and lamp loads |
| Maximum inductive load switch-off energy | 0.3 J |
| Actuator connection | 4 × 2-conductor |
| Dedicated 0 V connections | 4 |
| Internal output data width | 4 bits |
| System supply voltage | 5 V DC via data contacts |
| System supply current consumption | 10 mA |
| Field supply voltage | 24 V DC (-25% to +30%) |
| Field supply connection | Power jumper contacts |
| Field-side current consumption without external load | 30 mA |
| Electrical isolation | 500 V AC between field and system circuits, tested for 1 minute |
| Incoming power jumper contacts | 2 |
| Outgoing power jumper contacts | 2 |
| Power jumper contact current-carrying capacity | 10 A |
| Status indicators | 4 green LEDs (A–D) |
| Connection technology | CAGE CLAMP® via pluggable connector |
| Field connection points | 8 |
| Solid conductor cross-section | 0.08–2.5 mm² |
| Fine-stranded conductor cross-section | 0.08–2.5 mm² |
| Conductor size | AWG 28–14 |
| Strip length | 9–10 mm |
| Operating temperature | 0 to +55 °C |
| Protection rating | IP20 |
| Mounting type | DIN-35 rail |
| Module width | 12 mm |
| Module height | 69.8 mm |
| Module depth | 100 mm |
| Compatible pluggable connector | WAGO 753-110 |
| Compatible coding elements | WAGO 753-150 |
| Connector supply | Pluggable connector and coding fingers not included |
The WAGO 753-531/000-800 is a four-channel digital output module used to switch compatible 24 V DC industrial loads from a WAGO PLC or fieldbus coupler. It is the interference-free variant designed for suitable safety function applications.
The module provides four independent digital output channels, each rated for 0.5 A.
Interference-free is a manufacturer-specified characteristic of the /000-800 variant for use in suitable safety function applications. Its application must follow the relevant WAGO documentation and the validated system design.
WAGO identifies the module as interference-free for safety function applications. This designation does not independently establish a particular SIL or Performance Level rating; safety suitability depends on the complete system architecture and its validation.
Each channel provides 24 V DC high-side switching with a rated output current of 0.5 A.
The module provides four output connections and four corresponding 0 V connections, allowing four compatible two-conductor actuators to be wired directly to the module.
Yes. All four digital output channels incorporate short-circuit protection. The specified short-circuit current is 1.7 A.
Yes. The WAGO 753-531/000-800 includes reverse-voltage protection as specified by the manufacturer.
The maximum switching frequency is 1 kHz, subject to the characteristics of the connected loads and application requirements.
The module supports resistive, inductive and lamp loads, provided their voltage, current and switching characteristics remain within the specified limits.
Yes. Compatible 24 V DC solenoid valve coils can be controlled when their current demand and inductive switching energy remain within the module's ratings.
Both modules provide four 24 V DC digital outputs rated at 0.5 A per channel with two-conductor actuator connections. The 753-531/000-800 is the interference-free variant for suitable safety function applications.
Both modules provide four interference-free 24 V DC digital outputs with a 0.5 A per-channel rating. The 753-531/000-800 uses a removable pluggable connector, whereas the 750-531/000-800 uses an integrated field wiring connection arrangement.
Yes. The module provides 500 V AC electrical isolation between field and system circuits, tested for 1 minute. This does not mean that all four output channels are individually galvanically isolated.
The internal electronics receive 5 V DC through the system data contacts, while the output circuits use a 24 V DC field supply through the power jumper contacts.
Yes. Four green LEDs labelled A, B, C and D indicate the states of digital outputs 1 to 4.
No. The WAGO 753-531/000-800 is supplied without the pluggable connector and coding fingers. Compatible accessories include the WAGO 753-110 connector and WAGO 753-150 coding elements.
The module is designed for DIN-35 rail mounting as part of a compatible WAGO-I/O-SYSTEM 750/753 station. Its compact 12 mm width supports space-efficient installation in industrial control cabinets.
WAGO digital I/O modules are used by automation engineers, machine builders and industrial system integrators to develop reliable, flexible and scalable control systems. The WAGO 753-531/000-800 4-channel digital output module combines interference-free output characteristics, 24 V DC high-side switching, four 0.5 A short-circuit-protected outputs and convenient two-conductor actuator connections for industrial automation applications.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.