Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£302.40
The WAGO 750-667/000-104 is a 4-channel fail-safe digital input and 4-channel fail-safe digital output module with integrated configurable safety logic. Designed for the WAGO I/O System 750/753, it provides 24 V DC operation, 2 A output current per channel and PROFIsafe V2.6 communication for industrial machinery safety applications.
The module combines four clock-sensitive safety inputs, four safety-related semiconductor outputs and two clock outputs for sensor testing. Its integrated safety logic supports applications up to SIL 3 / PL e, subject to the complete safety circuit architecture, configuration and validation. In suitable installations, safety functions can operate without a separate dedicated safety controller.
Featuring 30 virtual inputs and 30 virtual outputs, configurable diagnostic functions and a compact 24 mm-wide DIN rail housing, the WAGO 750-667/000-104 provides a flexible solution for distributed machine safety, emergency-stop monitoring, protective guard supervision and safety-related actuator control.
The WAGO 750-667/000-104 provides an integrated interface for connecting safety-related field devices to industrial automation systems. Its four clock-sensitive inputs support compatible emergency-stop switches, safety interlocks, operating mode selectors, light barriers and semiconductor safety sensors. Two independently clocked outputs can supply test signals to connected sensors, supporting the detection of cross circuits and other wiring faults.
The module's internal safety logic allows the four physical safety inputs to be combined with virtual signals from a compatible controller. Up to 12 safety logic functions can be configured using WAGO Safety Editor, enabling selected safety functions to be processed directly within the module. This can reduce the need for a separate safety controller in suitable applications, although the complete installation must still satisfy the required safety integrity and performance levels.
The four safety outputs are designed for switching compatible 24 V DC resistive and inductive loads, including loads classified under DC13, at currents up to 2 A per channel. Unipolar and bipolar switching arrangements provide flexibility for different actuator circuits, while integrated overload and short-circuit monitoring supports fault detection.
Through PROFIsafe V2.6 over PROFINET, the module can also exchange safety-related data with compatible network controllers. Diagnostic LEDs indicate input and output status, communication conditions, parameterisation and module faults, helping maintenance engineers identify problems during commissioning and operation.
For installations where the 24 V DC supply cable exceeds 3 m, WAGO specifies a suitable filter module or equivalent external filtering for applicable surge and burst protection requirements. All safety functions must be configured, wired, tested and validated in accordance with the manufacturer's documentation and the relevant machinery safety standards.
| System accessory | Yes |
|---|---|
| SIL according to IEC 61508 | 3 |
| Number of digital inputs | 4 |
| Supporting protocol for PROFIBUS | Yes |
| Type of output voltage | DC |
| Degree of protection (IP) | IP20 |
| Number of digital outputs | 4 |
| Supply voltage DC | 24 – 24 V |
| Suitable for rail mounting | Yes |
| Suitable for safety functions | Yes |
| Short-circuit protection, outputs available | Yes |
| Supporting protocol for PROFIsafe | Yes |
| Voltage type (supply voltage) | DC |
| Input current at signal 1 | 3 mA |
| Supporting protocol for PROFINET CBA | Yes |
| Supporting protocol for PROFINET IO | Yes |
| Type of electric connection | Spring clamp connection |
| Output current | 2 A |
| Explosion safety category for gas | ATEX gas-ex-protection, Cat. 3G |
| Explosion safety category for dust | ATEX dust-ex-protection, Cat. 3D |
| Height | 100 mm |
| Width | 24 mm |
| Performance level according to EN ISO 13849-1 | Level e |
| Permitted voltage at output | 24 – 24 V |
| Type of voltage (input voltage) | DC |
| Fieldbus connection over separate bus coupler possible | Yes |
| Depth | 67.8 mm |
| Manufacturer | WAGO |
| Series | WAGO I/O System 750/753 |
| Model | 750-667/000-104 |
| Product type | Fail-safe digital input/output module with integrated safety logic |
| Total safety I/O channels | 8 |
| Number of clock outputs | 2 |
| Nominal input voltage | 24 V DC |
| Input characteristic | Clock-sensitive, Type 1 according to IEC 61131 |
| Signal 0 voltage range | −3 to +5 V DC |
| Signal 1 voltage range | 15–30 V DC |
| Typical input current | 3 mA per channel at signal 1 |
| Maximum input signal frequency | 50 Hz |
| Input filter | 0–200 ms, configurable |
| Minimum input signal duration | Input filter time + test pulse duration + 2 ms |
| Nominal output voltage | 24 V DC |
| Output technology | Safety-related semiconductor switching |
| Output current per channel | 2 A DC |
| Maximum combined output current | 8 A |
| Output switching modes | Unipolar and bipolar |
| Output residual current at signal 0 | Less than 1 mA |
| Output protection | Short-circuit and overload protection according to IEC 61131-2 |
| Output protection response threshold | 2.7–4.4 A DC |
| Parallel connection of outputs | Not permitted |
| Clock output voltage | 24 V DC |
| Clock output current | 0.1 A per channel |
| Clock output test pulse duration | 0.5–200 ms, configurable |
| Maximum permissible signal cable length | 200 m |
| Safety communication | PROFIsafe V2.6 via PROFINET |
| Non-safety communication | PROFINET with functional limitations |
| Integrated safety logic | Up to 12 configurable functions |
| Virtual inputs | 30 |
| Virtual outputs | 30 |
| Safety logic capability | Category 4 / PL e according to EN ISO 13849-1; SIL 3 according to IEC 61508 / EN 62061 |
| Single-channel safety I/O capability | Category 2 / PL d; SIL 2 |
| Dual-channel safety I/O capability | Category 4 / PL e; SIL 3 |
| Safety standards | IEC 61508, EN ISO 13849-1 and EN 62061 |
| Configuration software | WAGO Safety Editor 75x |
| Safety address setting | DIP switch or supported engineering software |
| Channel-granular passivation | Supported |
| System supply voltage | 5 V DC via data contacts |
| System current consumption | 120 mA |
| Field supply voltage | 24 V DC SELV/PELV (−25 to +20%) |
| Field current consumption without external load | 30 mA |
| Electrical isolation | 500 V peak between system and field levels |
| Incoming power jumper contacts | 2 |
| Outgoing power jumper contacts | 2 |
| Power jumper contact current capacity | 10 A |
| Connection technology | 16 × WAGO CAGE CLAMP® |
| Conductor cross-section | 0.08–2.5 mm² |
| Wire stripping length | 8–9 mm |
| Protection rating | IP20 |
| Mounting type | DIN-35 rail |
| Dimensions (W × H × D) | 24 × 100 × 67.8 mm |
| Weight | Approximately 101.6 g |
| Operating temperature | 0 to +55 °C |
| Housing material | Polycarbonate and polyamide 6.6 |
| Housing colour | Yellow |
| Conformity marking | CE and UKCA |
The WAGO 750-667/000-104 is a fail-safe digital input/output module designed to monitor industrial safety devices and control safety-related actuators. It provides four safety inputs, four safety outputs and integrated configurable safety logic.
The module provides four 24 V DC fail-safe digital inputs, four 24 V DC safety-related outputs and two additional clock outputs for sensor testing.
Each safety output supports up to 2 A DC, with a maximum combined module output current of 8 A. The outputs must not be connected in parallel to increase the current capacity.
Yes. The module includes integrated configurable safety logic supporting up to 12 functions. Suitable safety applications can operate without a separate dedicated safety controller, provided the complete safety architecture is appropriately designed and validated.
Yes. The module supports PROFIsafe V2.6 over PROFINET. Its safety logic supports applications up to SIL 3 / PL e, while the achievable safety level of the input and output circuits depends on their single-channel or dual-channel configuration and the complete system design.
The WAGO 750-667/000-104 combines four fail-safe inputs, four 2 A safety outputs, integrated configurable safety logic and PROFIsafe communication in a compact industrial I/O module. Designed for demanding machinery safety applications, it provides flexible signal monitoring, diagnostic capabilities and safety-related control within compatible WAGO automation systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.