Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£292.95
The WAGO 750-666/000-104 is an advanced fail-safe digital input/output module with integrated safety logic, designed for safety-related industrial automation and machinery control. As part of the WAGO I/O System 750/753, it combines four safety-related digital inputs with two high-current safety outputs, enabling reliable monitoring and control of emergency-stop circuits, protective devices and industrial actuators.
The module features four 24 V DC clock-sensitive digital inputs and two 24 V DC power outputs rated for up to 10 A under specified operating conditions. Its integrated configurable safety logic enables safety functions up to SIL 3 / PL e to be implemented without a separate safety controller when the complete application meets the relevant safety requirements.
Supporting PROFIsafe V2.6 over PROFINET, the WAGO 750-666/000-104 provides flexible integration into industrial safety networks. Its internal logic can be configured using WAGO Safety Editor, while 30 virtual inputs and 30 virtual outputs enable interaction between physical safety signals and controller data. The compact DIN rail design makes it suitable for safety-related control cabinets and distributed automation installations.
Fail-safe I/O modules such as the WAGO 750-666/000-104 provide a safety-related interface between protective devices and industrial control equipment. Its four clock-sensitive inputs can monitor compatible emergency-stop switches, safety interlocks, operating mode selectors, light barriers and other safety devices. Two configurable clock outputs help detect wiring faults and cross circuits when used with suitable sensor connections.
The module incorporates configurable internal safety logic capable of processing physical inputs together with virtual signals received from a connected controller. This allows selected safety functions to be implemented locally without a separate safety controller, provided the complete safety architecture is designed and validated for the required performance level.
The two power outputs support safety-related switching of compatible DC loads. Output O1 operates in high-side switching mode, while O2 supports high-side or low-side switching configurations. The module monitors output conditions and provides configurable diagnostic functions to help detect faults. PROFIsafe V2.6 enables integration with compatible PROFINET safety controllers where networked safety communication is required.
For installations where the 24 V DC supply cable exceeds 3 m, WAGO specifies a suitable filter module or external filtering arrangement for protection against surge and burst disturbances in applicable installations. Safety circuit design, output protection, wiring and parameterisation must follow the manufacturer's instructions and the relevant machinery safety standards.
| System accessory | Yes |
|---|---|
| SIL according to IEC 61508 | 3 |
| Number of digital inputs | 2 |
| Supporting protocol for PROFIBUS | Yes |
| Type of output voltage | DC |
| Degree of protection (IP) | IP20 |
| Number of digital outputs | 4 |
| Supply voltage DC | 24 – 24 V |
| Suitable for rail mounting | Yes |
| Suitable for safety functions | Yes |
| Short-circuit protection, outputs available | Yes |
| Supporting protocol for PROFIsafe | Yes |
| Voltage type (supply voltage) | DC |
| Input current at signal 1 | 3 mA |
| Supporting protocol for PROFINET CBA | Yes |
| Supporting protocol for PROFINET IO | Yes |
| Type of electric connection | Spring clamp connection |
| Output current | 10 A |
| Explosion safety category for gas | ATEX gas-ex-protection, Cat. 3G |
| Explosion safety category for dust | ATEX dust-ex-protection, Cat. 3D |
| Height | 100 mm |
| Width | 24 mm |
| Performance level according to EN ISO 13849-1 | Level e |
| Permitted voltage at output | 24 – 24 V |
| Type of voltage (input voltage) | DC |
| Fieldbus connection over separate bus coupler possible | Yes |
| Depth | 67.8 mm |
| Manufacturer | WAGO |
| Series | WAGO I/O System 750/753 |
| Model | 750-666/000-104 |
| Product type | Fail-safe digital input/output module with integrated safety logic |
| Total safety I/O channels | 6 |
| Number of clock outputs | 2 |
| Nominal input voltage | 24 V DC |
| Input characteristic | Clock-sensitive, Type 1 according to IEC 61131 |
| Signal 0 voltage range | −3 to +5 V DC |
| Signal 1 voltage range | 15–30 V DC |
| Typical input current | 3 mA per channel |
| Maximum input signal frequency | 50 Hz |
| Input filter | 0–200 ms, configurable |
| Nominal output voltage | 24 V DC |
| Output current per channel | 10 A DC for resistive/general-purpose loads; 2 A DC for Pilot Duty/DC13 |
| Maximum total module output current | 10 A |
| Output current derating | 10 A up to +40 °C, reducing to 6 A at +55 °C |
| Output switching frequency | Up to 50 Hz for resistive loads |
| Output protection | Short-circuit and overload protection within specified limits |
| Output test pulse duration | 0–500 ms, configurable |
| Clock output voltage | 24 V DC |
| Clock output current | 0.1 A per channel |
| Clock output test pulse duration | 1–500 ms, configurable |
| Maximum permissible signal cable length | 200 m |
| Safety communication | PROFIsafe V2.6 via PROFINET |
| Non-safe communication | PROFINET with functional limitations |
| Safety capability | Up to SIL 3 / PL e |
| Integrated safety logic | Up to 12 configurable functions |
| Virtual inputs | 30 |
| Virtual outputs | 30 |
| Configuration software | WAGO Safety Editor 75x |
| Safety address configuration | DIP switch or supported engineering software |
| System supply voltage | 5 V DC via data contacts |
| System current consumption | 120 mA |
| Field supply voltage | 24 V DC SELV/PELV |
| Field current consumption without external load | 30 mA |
| Electrical isolation | 500 V peak between specified circuits |
| Power jumper contact current capacity | 10 A |
| Connection technology | WAGO CAGE CLAMP® |
| Conductor cross-section | 0.08–2.5 mm² |
| Wire stripping length | 8–9 mm |
| Protection rating | IP20 |
| Mounting type | DIN-35 rail |
| Dimensions (W × H × D) | 24 × 64 × 100 mm |
| Weight | approx. 97 g |
| Operating temperature | 0 to +55 °C |
| Housing colour | Yellow |
The WAGO 750-666/000-104 is a fail-safe digital input/output module used to monitor safety devices and control safety-related outputs in industrial machinery and automation systems.
The module provides four 24 V DC fail-safe digital inputs, two safety-related digital power outputs and two additional clock outputs for sensor testing.
Yes. Its integrated configurable safety logic allows suitable applications up to SIL 3 / PL e to be implemented without a separate safety controller, provided the complete system satisfies the required functional safety conditions.
The module supports up to 10 A DC per output channel for suitable resistive and general-purpose loads, with a maximum combined module output current of 10 A. For Pilot Duty and DC13 loads, the channel rating is 2 A DC. Temperature derating applies.
Yes. The module supports PROFIsafe V2.6 over PROFINET and can communicate with compatible safety controllers. Its internal logic is configurable using WAGO Safety Editor.
WAGO functional safety modules provide integrated monitoring and control for safety-related industrial automation applications. The WAGO 750-666/000-104 combines four fail-safe inputs, two high-current safety outputs, configurable safety logic and PROFIsafe communication to support flexible machinery protection and distributed safety systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.