Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£531.43
The WAGO 750-495/040-010 is a high-performance 3-phase power measurement module designed for accurate electrical monitoring and energy analysis in medium-voltage industrial power distribution systems. As part of the robust WAGO-I/O-SYSTEM 750 XTR series, this module measures electrical parameters in three-phase networks with rated line-to-line voltages up to 20 kV AC and rated currents up to 300 A, using compatible external voltage and current sensors.
Engineered for demanding industrial environments, the WAGO 750-495/040-010 provides comprehensive measurement of voltage, current, active power, reactive power, apparent power, energy consumption, power factor, frequency and phase angle. Its advanced measurement capabilities include harmonic analysis up to the 41st harmonic, helping engineers evaluate power quality, identify electrical disturbances and optimise energy distribution.
The module integrates directly into compatible WAGO 750 XTR I/O stations, making measurement data available to connected controllers and automation systems. Featuring 24-bit measurement resolution, a compact 24 mm housing width, DIN-rail mounting and an extended operating temperature range of −40 to +70 °C, it provides dependable power monitoring in challenging electrical installations.
Accurate electrical measurement is essential for maintaining efficient, reliable and safe operation of industrial power distribution networks. The WAGO 750-495/040-010 enables continuous monitoring of three-phase electrical quantities, providing engineers and automation systems with detailed information about network performance and energy consumption.
Unlike conventional direct-connected low-voltage measurement devices, this module uses external voltage and current sensors to acquire measurement signals from medium-voltage electrical networks. This arrangement allows measurement of networks rated up to 20 kV AC and currents up to 300 A while keeping the module's measurement interfaces separate from direct medium-voltage connections. Correct sensor selection, insulation coordination and installation are essential.
The module calculates electrical quantities including active, reactive and apparent power, energy, power factor and frequency. Its harmonic analysis capability supports the identification of waveform distortion and potential power quality problems. Measurement results are transferred through the WAGO I/O system for processing by compatible controllers, allowing integration into energy management, monitoring and supervisory control applications.
As part of the WAGO 750 XTR range, the module is engineered for applications where temperature extremes, vibration, shock and electromagnetic disturbances can affect conventional automation equipment. Its rugged construction and compact DIN-rail format make it suitable for industrial control cabinets, power distribution monitoring panels and infrastructure automation systems.
| System accessory | Yes |
|---|---|
| Supporting protocol for other bus systems | Yes |
| SIL according to IEC 61508 | None |
| Degree of protection (IP) | IP20 |
| Power consumption | 1 W |
| Number of analogue inputs | 6 |
| Resolution of the analogue inputs | 24 bit |
| Supply voltage DC | 5 – 5 V |
| Suitable for rail mounting | Yes |
| Input, current | Yes |
| Voltage type (supply voltage) | DC |
| Input, voltage | Yes |
| Explosion safety category for gas | None |
| Explosion safety category for dust | None |
| Height | 100 mm |
| Performance level according to EN ISO 13849-1 | None |
| Width | 24 mm |
| Fieldbus connection over separate bus coupler possible | Yes |
| Depth | 67.8 mm |
| Manufacturer | WAGO |
| Series | WAGO-I/O-SYSTEM 750 XTR |
| Model | 750-495/040-010 |
| Product type | Three-phase power measurement I/O module |
| Application | Medium-voltage power monitoring and energy measurement |
| Measured network | Three-phase AC |
| Maximum rated line-to-line voltage | 20 kV AC RMS |
| Maximum rated line-to-neutral voltage | 11.547 kV AC RMS |
| Maximum rated measurement current | 300 A RMS |
| Voltage measurement | Via compatible external voltage sensors |
| Current measurement | Via compatible external current sensors |
| Analogue measurement inputs | 6 |
| Measurement resolution | 24-bit |
| Measurement method | True RMS |
| Measured quantities | Voltage, current, active power, reactive power, apparent power, energy, power factor, frequency and phase angle |
| Harmonic analysis | Up to the 41st harmonic |
| System supply voltage | 5 V DC via data contacts |
| Connection technology | CAGE CLAMP® spring-pressure connection |
| Number of connection points | 16 |
| Conductor cross-section | 0.25–2.5 mm² |
| Mounting type | DIN rail |
| DIN-rail size | 35 mm |
| Protection rating | IP20 |
| Operating temperature | −40 to +70 °C |
| Housing width | 24 mm |
| Compatible system | WAGO-I/O-SYSTEM 750 XTR |
| Measurement data output | Process data via WAGO I/O system |
| Sensor interface | External voltage and current measurement sensors |
The WAGO 750-495/040-010 is a three-phase power measurement module designed to monitor voltage, current, power, energy consumption, power factor and other electrical parameters in medium-voltage industrial networks using compatible external measurement sensors.
The module supports three-phase networks with rated line-to-line voltages up to 20 kV AC RMS and rated currents up to 300 A RMS, using appropriate external voltage and current sensors.
Yes. The module requires compatible external voltage and current sensors to measure medium-voltage electrical networks. The medium-voltage conductors must not be connected directly to the module's measurement terminals.
Yes. The module measures active, reactive and apparent power, energy consumption, power factor and frequency. It also supports harmonic analysis up to the 41st harmonic, enabling detailed assessment of electrical network performance.
The 750-495/040-010 is a specialised 750 XTR variant designed for medium-voltage measurement through external sensors, supporting networks up to 20 kV AC and rated currents up to 300 A. Standard 750-495 variants are intended for different voltage and current measurement arrangements.
The WAGO 750-495/040-010 is designed for operation across an extended temperature range of −40 to +70 °C, making it suitable for demanding industrial and infrastructure environments.
The module mounts on a standard 35 mm DIN rail within a compatible WAGO 750 XTR I/O station. Electrical measurement sensors connect through CAGE CLAMP® terminals, while system power and process data are provided through the WAGO I/O system.
Yes. The module makes measurement values available through the WAGO I/O process image. Compatible WAGO controllers and communication couplers can transfer this information to industrial automation, energy management and SCADA systems.
WAGO 750 XTR power measurement technology provides industrial engineers and energy management professionals with dependable electrical monitoring, comprehensive measurement data and robust integration into demanding automation environments. The WAGO 750-495/040-010 combines medium-voltage measurement capability with advanced power analysis and rugged industrial construction.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.