Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£365.74
The WAGO 750-494/025-000 is a 3-phase power measurement module rated for 480 V AC and 1 A current measurement, designed for the modular WAGO-I/O-SYSTEM 750/753. Featuring an extended operating temperature range, this compact industrial measurement module enables three-phase electrical parameters to be acquired and evaluated directly within a compatible WAGO automation system.
The module provides three voltage measurement inputs and three current measurement inputs, using True RMS measurement to evaluate electrical signals. In addition to voltage and current, it calculates important power quality and energy parameters, including active and reactive power, energy consumption, power factor, mains frequency and harmonic distortion. Harmonic analysis up to the 41st harmonic supports detailed assessment of electrical network conditions and the behaviour of connected industrial loads.
Designed for industrial energy monitoring and electrical automation, the WAGO 750-494/025-000 combines 24-bit measurement resolution, 4 kV electrical isolation between system and field, integrated diagnostic indicators and a compact 12 mm-wide housing. Its extended operating temperature range of −20 to +60 °C makes it particularly suitable for power distribution monitoring, machinery energy analysis and demanding industrial control cabinet installations.
The WAGO 750-494/025-000 provides integrated measurement of three-phase electrical networks through three voltage measurement inputs and three current measurement inputs. The module acquires electrical signals and evaluates them using True RMS measurement, allowing effective values to be determined even when waveforms are not perfectly sinusoidal. Current measurement is designed for 1 A current transformer secondary circuits, while the voltage measurement paths support rated voltages of 277 V AC phase-to-neutral and 480 V AC line-to-line.
Beyond basic voltage and current monitoring, the module calculates electrical quantities including power, energy, power factor and mains frequency. Harmonic analysis up to the 41st harmonic and total harmonic distortion measurement provide additional information about power quality. These functions can help operators identify abnormal electrical conditions, monitor load behaviour and support energy management within industrial facilities.
The module includes diagnostic indication for communication status, individual phase errors, current measurement path overranges, voltage measurement path conditions and incorrect phase sequence. Its 4 kV isolation between the system and field levels provides separation between the electrical measurement circuits and internal automation electronics. The extended operating temperature range of −20 to +60 °C, together with specified vibration and shock resistance, supports use in demanding industrial control environments.
Configuration and integration can be performed using compatible WAGO software, including WAGO-I/O-CHECK, CODESYS libraries and e!COCKPIT. The module communicates measurement data through the WAGO internal bus to a compatible fieldbus coupler or controller, allowing power measurements to be incorporated into monitoring, reporting and automation functions. The internal electronics receive their 5 V DC operating supply through the data contacts.
Because the WAGO 750-494/025-000 is intended for measurement of potentially hazardous electrical voltages, installation and commissioning must be carried out by appropriately qualified electrical personnel. The current transformer secondary circuits, voltage connections, overcurrent protection, insulation and earthing arrangements must comply with the manufacturer's instructions and applicable electrical standards. Current transformer secondary circuits must not be opened while energised, and the module must not be used beyond its specified voltage and current ratings.
| System accessory | Yes |
|---|---|
| Supporting protocol for other bus systems | Yes |
| SIL according to IEC 61508 | None |
| Supply voltage AC 50 Hz | 277 – 277 V |
| Degree of protection (IP) | IP20 |
| Power consumption | 1 W |
| Number of analogue inputs | 6 |
| Supply voltage AC 60 Hz | 277 – 277 V |
| Resolution of the analogue inputs | 24 bit |
| Supply voltage DC | 5 – 5 V |
| Suitable for rail mounting | Yes |
| Input, current | Yes |
| Voltage type (supply voltage) | DC |
| Input, voltage | Yes |
| Explosion safety category for gas | ATEX gas-ex-protection, Cat. 3G |
| Explosion safety category for dust | ATEX dust-ex-protection, Cat. 3D |
| Height | 100 mm |
| Performance level according to EN ISO 13849-1 | None |
| Width | 12 mm |
| Fieldbus connection over separate bus coupler possible | Yes |
| Depth | 67.8 mm |
| Manufacturer | WAGO |
| Manufacturer part number | 750-494/025-000 |
| Product series | WAGO-I/O-SYSTEM 750/753 |
| Product type | Three-phase power measurement module |
| Version | Extended temperature |
| Measurement type | Three-phase electrical power and energy measurement |
| Number of measurement inputs | 6 |
| Voltage measurement inputs | 3 |
| Current measurement inputs | 3 |
| Rated line-to-line voltage | 480 V AC |
| Rated phase-to-neutral voltage | 277 V AC |
| Rated current measurement | 1 A |
| Measurement method | True RMS |
| Measurement resolution | 24 bits |
| Typical voltage path input resistance | 1,072 kΩ |
| Typical current path input resistance | 22 mΩ |
| Mains frequency measurement range | 45–65 Hz |
| Harmonic analysis frequency range | 0–3,300 Hz |
| Maximum harmonic order | 41st harmonic |
| Calculated parameters | Line-to-line voltage, power, energy, power factor, mains frequency, harmonics and THD |
| Configuration software | WAGO-I/O-CHECK, CODESYS Library, e!COCKPIT |
| System supply voltage | 5 V DC via data contacts |
| Internal current consumption | 100 mA |
| Electrical isolation | 4 kV between system and field |
| Rated surge voltage | 4 kV |
| Communication indicator | Green LED |
| Error indicators | Red LEDs for phase and measurement path errors |
| Phase sequence indicator | Yellow LED |
| Connection technology | 8 × CAGE CLAMP® |
| Solid conductor cross-section | 0.08–2.5 mm² |
| Fine-stranded conductor cross-section | 0.08–2.5 mm² |
| Conductor range | 28–14 AWG |
| Conductor stripping length | 8–9 mm |
| Mounting | 35 mm DIN rail |
| Degree of protection | IP20 |
| Operating temperature | −20 to +60 °C |
| Storage temperature | −40 to +85 °C |
| Relative humidity without condensation | Up to 95% |
| Pollution degree | 2 |
| Operating altitude | 0–2,000 m |
| Vibration resistance | 4 g according to IEC 60068-2-6 |
| Shock resistance | 15 g according to IEC 60068-2-27 |
| EMC immunity | EN 61000-6-2 |
| EMC emissions | EN 61000-6-3 |
| Depth from upper edge of DIN rail | 60.6 mm |
| Dimensions (W × H × D) | 12 × 100 × 67.8 mm |
| Weight | 48.8 g |
| Housing material | Polycarbonate and polyamide 6.6 |
| Housing colour | Light grey |
| Country of origin | Germany |
| GTIN / EAN | 4050821836230 |
The WAGO 750-494/025-000 is a three-phase power measurement module for the WAGO-I/O-SYSTEM 750/753. It measures voltage and current and calculates electrical parameters including power, energy, power factor, mains frequency, harmonics and total harmonic distortion for industrial monitoring and automation applications.
The module is rated for 480 V AC line-to-line and 277 V AC phase-to-neutral measurement, with 1 A current measurement inputs. It is intended for use with appropriately selected current transformers and electrical measurement circuits that remain within the manufacturer's specified ratings.
Yes. The WAGO 750-494/025-000 uses True RMS measurement and supports harmonic analysis up to the 41st harmonic, with a harmonic analysis frequency range of 0–3,300 Hz. It also calculates total harmonic distortion, power factor, power and energy values.
The WAGO 750-494/025-000 is an extended-temperature version designed for operation from −20 to +60 °C. It has an IP20 protection rating and is intended for installation within a suitable industrial enclosure.
The module integrates into a compatible WAGO-I/O-SYSTEM 750/753 station and can be configured using WAGO-I/O-CHECK, CODESYS libraries or e!COCKPIT. It uses eight CAGE CLAMP® terminals for electrical connections and receives its internal 5 V DC supply through the WAGO data contacts. Installation of voltage and current transformer circuits must be performed by qualified electrical personnel.
WAGO-I/O-SYSTEM 750/753 power measurement modules provide compact electrical monitoring within modular industrial automation systems. The WAGO 750-494/025-000 combines three-phase voltage and current acquisition, True RMS measurement, energy and power calculations, harmonic analysis, integrated diagnostics and extended-temperature operation to support informed energy management and reliable electrical condition monitoring.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.