Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£264.49
The WAGO 750-461/000-005 is a 2-channel analogue input module designed for direct connection of Ni1000 TK6180 resistance temperature detectors (RTDs) to the WAGO-I/O-SYSTEM 750/753. It provides accurate temperature signal acquisition for industrial automation, building management and process monitoring applications, converting resistance measurements from compatible nickel temperature sensors into digital data for processing by a WAGO controller or fieldbus coupler.
Featuring two independent temperature measurement channels, the WAGO 750-461/000-005 supports both 2-wire and 3-wire RTD connections. Its integrated signal processing automatically linearises the measured resistance across a temperature range of −60 to +250 °C, providing temperature values with a resolution of 0.1 °C. A typical conversion time of 320 ms makes the module suitable for monitoring temperature changes in industrial equipment, environmental systems and automated processes.
The module incorporates 500 V electrical isolation between the system and field levels, helping separate sensor wiring from the internal WAGO I/O bus. Green status LEDs indicate operational readiness and communication, while red diagnostic LEDs identify sensor errors. With a compact 12 mm-wide housing, CAGE CLAMP® spring-pressure terminals and DIN-35 rail mounting, the WAGO 750-461/000-005 offers a space-efficient solution for integrating nickel RTD temperature measurements into modular industrial control systems.
The WAGO 750-461/000-005 is specifically configured for Ni1000 TK6180 nickel resistance temperature sensors. These sensors change electrical resistance as temperature varies, allowing the module to calculate temperature from the measured resistance. The module automatically linearises the sensor characteristic and transmits temperature measurements as 16-bit digital values through the WAGO internal I/O bus. With a measurement resolution of 0.1 °C, the module is suitable for monitoring industrial equipment, building services and temperature-dependent processes.
Each of the two channels supports 2-wire or 3-wire RTD connections. A 3-wire arrangement can help compensate for lead resistance, improving measurement performance where sensors are installed at a distance from the control cabinet. The module also monitors sensor conditions and indicates faults such as wire breaks, short circuits and out-of-range measurements using its red diagnostic LEDs. The shield connection is routed directly to the DIN rail, helping support suitable electromagnetic compatibility practices. Because the 750-461/000-005 uses the Ni1000 TK6180 characteristic, it should not be treated as interchangeable with Pt100, Pt1000 or other nickel sensor variants without checking the appropriate module specification.
| System accessory | Yes |
|---|---|
| SIL according to IEC 61508 | None |
| Degree of protection (IP) | IP20 |
| Power consumption | 1 W |
| Number of analogue inputs | 2 |
| Resolution of the analogue inputs | 12 bit |
| Supply voltage DC | 5 – 5 V |
| Suitable for rail mounting | Yes |
| Voltage type (supply voltage) | DC |
| Input, resistor | Yes |
| Type of electric connection | Spring clamp connection |
| Explosion safety category for gas | ATEX gas-ex-protection, Cat. 3G |
| Explosion safety category for dust | ATEX dust-ex-protection, Cat. 3D |
| Height | 100 mm |
| Performance level according to EN ISO 13849-1 | None |
| Width | 12 mm |
| Fieldbus connection over separate bus coupler possible | Yes |
| Depth | 69.8 mm |
| Manufacturer | WAGO |
| Manufacturer part number | 750-461/000-005 |
| Product type | Analogue input module |
| Product family | WAGO-I/O-SYSTEM 750/753 |
| Total number of channels | 2 |
| Signal type | Resistance measurement |
| Supported sensor type | Ni1000 TK6180 RTD |
| Sensor connection | 2 × (2-wire or 3-wire) |
| Temperature measurement range | −60 to +250 °C |
| Temperature resolution | 0.1 °C |
| Typical conversion time | 320 ms |
| Maximum response time | 4 s |
| Typical measuring current | 0.5 mA |
| Measurement data width | 2 × 16 bits |
| Optional control/status data | 2 × 8 bits |
| Reference temperature for measurement error | 25 °C |
| Maximum measurement deviation | 0.2% of upper-range value |
| Maximum temperature-dependent error | 0.01%/K of upper-range value |
| System supply voltage | 5 V DC via data contacts |
| System supply current consumption | 80 mA |
| Electrical isolation | 500 V between system and field |
| Field connection technology | 8 × CAGE CLAMP® |
| Solid conductor cross-section | 0.08–2.5 mm² |
| Fine-stranded conductor cross-section | 0.08–2.5 mm² |
| Conductor size range | 28–14 AWG |
| Conductor strip length | 8–9 mm |
| Sensor cable shielding | Direct connection to DIN rail |
| Status indication | Green function LEDs for AI1 and AI2 |
| Error indication | Red sensor error LEDs for AI1 and AI2 |
| Mounting type | DIN-35 rail |
| Depth from upper edge of DIN rail | 62.6 mm |
| Operating temperature | 0 to +55 °C |
| Storage temperature | −40 to +85 °C |
| Protection rating | IP20 |
| Pollution degree | 2 according to IEC 61131-2 |
| Maximum relative humidity | 95%, non-condensing |
| Operating altitude | 0–2,000 m |
| Housing material | Polycarbonate and polyamide 6.6 |
| Housing colour | Light grey |
| Weight | approx. 51.2 g |
| Conformity marking | CE |
| GTIN / EAN | 4045454487058 |
| Packaging unit | 1 piece |
The WAGO 750-461/000-005 is a 2-channel analogue input module used to measure temperatures from compatible Ni1000 TK6180 resistance temperature sensors. It converts sensor resistance into digital temperature data for WAGO-I/O-SYSTEM 750/753 controllers and fieldbus couplers.
The module is specifically designed for Ni1000 TK6180 RTD sensors and supports both 2-wire and 3-wire connections. It should not be used as a direct replacement for Pt100, Pt1000, Ni100 or Ni1000 TK5000 modules without verifying the required sensor characteristic.
The WAGO 750-461/000-005 measures temperatures from −60 to +250 °C with a resolution of 0.1 °C. Its typical conversion time is 320 ms, making it suitable for continuous industrial temperature monitoring.
Yes. The module provides red diagnostic LEDs to indicate sensor faults, including wire breaks, short circuits and measurement range errors. Green LEDs indicate normal operation and communication status, helping maintenance personnel identify problems during commissioning and servicing.
The module mounts on a DIN-35 rail as part of a compatible WAGO-I/O-SYSTEM 750/753 station. It uses eight CAGE CLAMP® terminals for sensor wiring and receives its 5 V DC system supply through the internal data contacts. Its typical system-side current consumption is 80 mA, and it provides 500 V isolation between the system and field levels.
WAGO-I/O-SYSTEM 750/753 analogue input modules provide automation engineers, system integrators and industrial control panel builders with flexible solutions for accurate temperature measurement. The WAGO 750-461/000-005 combines two Ni1000 TK6180 RTD inputs, automatic temperature linearisation, 0.1 °C resolution and integrated sensor diagnostics to support dependable temperature monitoring across industrial automation and building control applications.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.