Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£207.90
The WAGO 750-1665/000-004 is a compact, high-density 8-channel fail-safe digital output module designed for functional safety applications in industrial automation, machinery and process control. As part of the WAGO I/O System 750/753, this module provides safety-related switching of connected electrical loads through a PROFIsafe communication interface.
Featuring eight 24 V DC semiconductor outputs rated at up to 0.5 A per output, the WAGO 750-1665/000-004 enables safety-related control of compatible actuators, contactors and other industrial equipment. Its outputs incorporate a dual-channel safety architecture and dynamic test pulses to support fault detection and reliable operation within properly engineered safety systems.
With support for PROFIsafe V2.4 and V2.6, compatibility with suitable PROFIBUS and PROFINET configurations, and a space-saving 12 mm module width, the WAGO 750-1665/000-004 provides a flexible solution for distributed functional safety. The module can be used in appropriately designed applications requiring safety performance up to SIL 3, Category 4 and PL e, subject to the complete system design, configuration and validation.
The WAGO 750-1665/000-004 PROFIsafe output module enables safety-related control signals to be transmitted from a compatible safety controller to connected industrial equipment. PROFIsafe is a safety communication protocol that allows safety-related information to be exchanged over supported industrial communication networks while implementing measures to detect communication errors.
The module provides eight semiconductor output connections for controlling suitable 24 V DC loads. Each output is rated for up to 0.5 A and can switch compatible resistive, capacitive and inductive loads within the manufacturer's specified operating limits. The module is particularly useful where multiple safety-related switching signals must be accommodated in a limited amount of cabinet space.
Its dual-channel safety architecture and dynamic test pulses contribute to the detection of relevant output faults. Integrated monitoring of short circuits and the 24 V DC supply provides additional diagnostic information for the safety system. The exact safety response depends on the configuration, connected loads, wiring and programmed safety functions.
Supporting PROFIsafe V2.4 and V2.6, the WAGO 750-1665/000-004 can be incorporated into compatible PROFIBUS and PROFINET installations. The PROFIsafe address can be assigned using the side-mounted coding switch or supported configuration software, allowing the module to be identified and managed by the safety controller.
For applications requiring potential-free contacts, the module can be used with a compatible WAGO 750-1689 safety relay output module. This provides additional flexibility when integrating safety-related switching functions into industrial machinery and control systems.
Functional safety performance must always be assessed at system level. Achieving SIL 3, PL e or Category 4 depends on the complete safety function, including the controller, field devices, electrical design, fault detection, configuration and validation. The WAGO 750-1665/000-004 must be installed and commissioned according to the applicable WAGO safety manual and relevant safety standards.
| System accessory | Yes |
|---|---|
| SIL according to IEC 61508 | 3 |
| Supporting protocol for PROFIBUS | Yes |
| Type of output voltage | DC |
| Degree of protection (IP) | IP20 |
| Number of digital outputs | 8 |
| Supply voltage DC | 24 – 24 V |
| Suitable for rail mounting | Yes |
| Suitable for safety functions | Yes |
| Short-circuit protection, outputs available | Yes |
| Type of digital output | Other |
| Supporting protocol for PROFIsafe | Yes |
| Voltage type (supply voltage) | DC |
| Supporting protocol for PROFINET CBA | Yes |
| Supporting protocol for PROFINET IO | Yes |
| Type of electric connection | Spring clamp connection |
| Output current | 0.5 A |
| Explosion safety category for gas | ATEX gas-ex-protection, Cat. 3G |
| Explosion safety category for dust | ATEX dust-ex-protection, Cat. 3D |
| Height | 100 mm |
| Width | 12 mm |
| Performance level according to EN ISO 13849-1 | Level e |
| Permitted voltage at output | 24 – 24 V |
| Fieldbus connection over separate bus coupler possible | Yes |
| Depth | 69 mm |
| Manufacturer | WAGO |
| Series | WAGO I/O System 750/753 |
| Model | 750-1665/000-004 |
| Product type | Fail-safe digital output module |
| Output technology | Semiconductor digital outputs |
| Number of physical outputs | 8 |
| Output designations | O1+ to O8+ |
| Nominal output voltage | 24 V DC |
| Rated output current | 0.5 A per output |
| Safety communication protocol | PROFIsafe |
| Supported PROFIsafe versions | V2.4 and V2.6 |
| Supported fieldbus architectures | PROFIBUS and PROFINET with compatible safety controllers and couplers |
| Safety architecture | Dual-channel structure with dynamic test pulses |
| Supported safety integrity | Up to SIL 3 in appropriately designed and validated applications |
| Supported performance level | Up to PL e in appropriately designed and validated applications |
| Supported safety category | Up to Category 4 in appropriately designed and validated applications |
| Supported load types | Resistive, capacitive and inductive loads within specified limits |
| Inductive load category | DC-13 |
| Output operating mode | Unipolar |
| Output diagnostics | Short-circuit and output fault monitoring |
| Supply diagnostics | 24 V DC supply monitoring |
| System-to-field separation | Electrically isolated |
| PROFIsafe address configuration | Side-mounted coding switch, WAGO-I/O-CHECK or compatible safety engineering software |
| Status indicators | Individual output status and fault LEDs |
| Output connection technology | Push-in connection system |
| Module width | 12 mm |
| Mounting | DIN-rail installation within a compatible WAGO I/O System 750/753 node |
| Compatible relay expansion | WAGO 750-1689 safety relay output module, subject to application requirements |
| Configuration and commissioning | Compatible WAGO engineering tools and safety controller software |
| Application areas | Industrial automation, building technology and process technology |
| Installation requirements | Use a compatible safety controller, fieldbus coupler and approved system configuration |
| Supply protection | Additional filtering may be required for long supply lines or specified EMC environments |
The WAGO 750-1665/000-004 is a fail-safe digital output module used for safety-related switching in industrial automation, machinery and process control. It communicates with a compatible safety controller using PROFIsafe and provides eight 24 V DC semiconductor outputs.
The module provides eight physical semiconductor outputs, designated O1+ to O8+. Its safety architecture uses dual-channel structures and dynamic test pulses, so the number of independent safety functions depends on the approved configuration and application design.
The WAGO 750-1665/000-004 provides 24 V DC outputs with a rated current of up to 0.5 A per output. Connected loads must comply with the manufacturer's electrical ratings and safety installation requirements.
The module supports PROFIsafe V2.4 and V2.6 and can be used within suitable PROFIBUS and PROFINET safety architectures when combined with compatible controllers and communication hardware.
Yes. The module supports applications up to SIL 3, Category 4 and PL e when the complete safety function is correctly designed, configured and validated. The module alone does not guarantee that the entire installation achieves these safety ratings.
Yes. The WAGO 750-1665/000-004 includes short-circuit and 24 V DC supply monitoring. Its safety output architecture also uses dynamic test pulses to support detection of relevant faults.
The PROFIsafe address can be configured using the module's side-mounted coding switch, WAGO-I/O-CHECK or the engineering software of a compatible safety controller, depending on the approved configuration procedure.
Yes. The module supports compatible resistive, capacitive and inductive loads, including suitable DC-13 applications, within the specified 24 V DC and 0.5 A output ratings. Load characteristics and safety requirements must be checked against the manufacturer's documentation.
Yes. The module can control compatible safety relay output hardware, including the WAGO 750-1689, to support applications requiring potential-free switching contacts. The combination must be engineered and validated for the intended safety function.
No. The WAGO 750-1665/000-004 is a fail-safe output module, not a standalone safety PLC. It requires integration with compatible WAGO I/O hardware and an appropriately configured safety control system to perform safety-related functions.
WAGO functional safety modules provide machine builders, system integrators and automation engineers with compact solutions for distributed safety control. The WAGO 750-1665/000-004 combines eight 24 V DC fail-safe outputs, PROFIsafe communication, integrated diagnostics and high-density modular construction to support properly engineered safety applications in modern industrial automation systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.