Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
19.50.0.024.0000 Finder Override module (0/10)V AC/DC 24V
The Finder 19.50.0.024.0000 is an analogue override module that provides a selectable 0 to 10 V output either from a controller (Automatic) or from its front mounted potentiometer (Hand). It is designed for intervention and status indication in building and industrial control systems where you may need to bypass a PLC or BMS safely.
£60.95
Why Choose the Finder 19.50 Analogue Override Module
The Finder 19.50.0.024.0000 is an analogue override module that provides a selectable 0 to 10 V output either from a controller (Automatic) or from its front mounted potentiometer (Hand). It is designed for intervention and status indication in building and industrial control systems where you may need to bypass a PLC or BMS safely.
Powered at 24 V AC or DC, the module is 17.5 mm wide for compact DIN rail installations. Front panel features include an Auto or Hand selector, a manual level knob, a yellow status LED for Hand mode, and three green LEDs indicating output level thresholds at >2.5 V, >5 V and >7.5 V. A low power feedback contact 53 54 changes state when not in Auto to signal override to the control room.
Key Features
- Analogue override of a 0 to 10 V signal with Auto or Hand selection.
- 24 V AC/DC supply, compact 17.5 mm wide housing, 35 mm DIN rail mounting.
- Output status LEDs at >2.5 V, >5 V and >7.5 V thresholds.
- Override indication via yellow LED and a feedback contact that changes state when not in Auto.
- Intended as an intervention module in BMS, HVAC and general automation.
Values above condensed from the Finder 19 Series datasheet. See the datasheet for exact limits and wiring.
Applications
- HVAC and BMS loops where a 0 to 10 V actuator needs manual override during maintenance or controller fault.
- Industrial process control where operators must force a valve, damper or drive to a safe position.
- General automation requiring local status indication and remote override signalling.
Frequently Asked Questions
Technical Specifications
Tick the specs you need, then view products that match.
| Voltage | 24 V | |
|---|---|---|
| Series | 19 Series switching actuators and status indicating modules | |
| SKU | 195000240000 | |
| Supply voltage | 24 V AC or 24 V DC (19.2â26.4 V range) | |
| Consumption | approx. 0.9 VA (AC) / 0.7 W (DC) | |
| Analogue input | 0 to 10 V at terminals Yin A2 | |
| Analogue output | 0 to 10 V at terminals Yout A2 | |
| Feedback contact | 53 54 (1 NO), 24 V AC/DC, 100 mA max; changes state when not in Auto | |
| Indication | Yellow LED for Hand mode, three green LEDs at >2.5 V, >5 V, >7.5 V | |
| Module width | 17.5 mm; Mounting: 35 mm DIN rail EN 60715 | |
| Dimensions (H x W x D) | 88.8 x 17.5 x 60.8 mm | |
| Typical ambient | minus 20 to plus 50 Â CC; Protection: IP20 | |
| HS Code | 85364900 |
Frequently Asked Questions
What standards or safety ratings are stated for this product?
Relevant ratings are listed in the technical specifications, including: Dimensions (H x W x D) 88.8 x 17.5 x 60.8 mm. Refer to the manufacturer marking and datasheet for variant-specific approvals.
