Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£41.80
The WAGO 756-1203/060-020 is a high-quality, industrial-grade Ethernet/PROFINET cable assembly designed for reliable data transmission in demanding industrial automation and networking environments. Featuring two straight, 4-pole M12 D-coded male connectors and a 2 m cable length, this pre-assembled communication cable provides a secure and robust connection between compatible industrial Ethernet devices, controllers, remote I/O systems and automation equipment.
Engineered for dependable industrial communication, the WAGO 756-1203/060-020 uses a shielded Category 5e (Cat 5e) cable with a durable green polyurethane (PUR) outer sheath. Its combination of overlapping aluminium-laminated foil and tinned copper braided screening provides effective protection against electromagnetic interference, helping maintain reliable data transmission in electrically noisy industrial environments. The cable is suitable for Ethernet and PROFINET IO communication, making it a practical solution for factory automation, machine building and distributed control systems.
With a 2 m cable length, an IP67 protection rating when correctly connected and an operating temperature range of −40 to +70 °C, the WAGO 756-1203/060-020 is built for demanding installation conditions. Its halogen-free, oil-resistant and UV-resistant PUR cable construction is also suitable for drag-chain applications, providing flexibility and mechanical durability in machinery where cables are subjected to repeated movement.
Industrial Ethernet cables play an essential role in modern automation systems by enabling fast and reliable communication between programmable logic controllers, remote I/O modules, industrial switches, sensors and machine control equipment. The WAGO 756-1203/060-020 is specifically designed for these applications, combining Cat 5e Ethernet performance with robust M12 D-coded connectivity to support dependable data transmission in industrial environments.
The cable features two straight M12 D-coded male connectors, each with four electrical contacts arranged for industrial Ethernet communication. This connector format is commonly used in PROFINET IO and 100BASE-TX Ethernet installations, where secure connections and resistance to industrial environmental conditions are essential. The pre-assembled 2 m cable provides a convenient connection between nearby automation devices without requiring additional field termination.
To help protect communication signals from industrial electrical interference, the cable incorporates a combination of overlapping aluminium-laminated foil screening and tinned copper braided shielding. The braided screen provides approximately 85% optical coverage, helping reduce the effects of electromagnetic interference generated by motors, variable frequency drives, switching equipment and other industrial electrical devices. This makes the cable particularly suitable for factory automation networks where maintaining signal integrity is critical.
The green polyurethane outer jacket provides a combination of flexibility, abrasion resistance and environmental durability. Its halogen-free construction and good resistance to oil, ozone, UV radiation, hydrolysis, microbes and chemicals help protect the cable in challenging industrial environments. The assembly is also suitable for use in drag-chain installations, making it practical for automated machinery with moving cable routes, provided the manufacturer's specified bending and movement limits are observed.
With an IP67 protection rating when properly mated, the WAGO 756-1203/060-020 offers protection against dust ingress and temporary water immersion under the applicable test conditions. Its −40 to +70 °C operating temperature range supports use across a wide range of industrial environments. The secure threaded M12 connections and robust cable construction make it suitable for applications requiring reliable communication, mechanical resilience and convenient installation.
| AWG-size | 22 |
|---|---|
| Colour anti-kink sleeve | Black |
| Cable type | Other |
| Halogen free according to EN IEC 60754-3 | Yes |
| Halogen free according to EN IEC 60754-1 | Yes |
| Connector housing design according to standard, connection 2 | Other |
| Category | Other |
| Colour outer sheath | Green |
| Connector housing design according to standard, connection 1 | Other |
| Suitable for cable guide chain | Yes |
| Type of connector connection 2 | M12 |
| Type of connector connection 1 | M12 |
| Length | 2 m |
| Degree of protection (IP) | IP67 |
| Halogen free according to EN IEC 60754-2 | Yes |
| Pin assignment | 1:1 |
| Anti-kink sleeve | Moulded-on |
| Material connector housing, connection 1 | Plastic |
| Material connector housing, connection 2 | Plastic |
| Cable construction | 1x4 |
| Manufacturer | WAGO |
| Product family | Industrial Ethernet/PROFINET Cables |
| Model | 756-1203/060-020 |
| Product type | Pre-assembled industrial Ethernet cable |
| Application | Ethernet and PROFINET IO communication |
| Cable category | Cat 5e |
| Communication protocols | Ethernet / PROFINET IO |
| Cable length | 2 m |
| Connection configuration | M12 plug to M12 plug |
| Connector 1 | M12 D-coded male plug, straight |
| Connector 2 | M12 D-coded male plug, straight |
| Connector coding | D-coded at both ends |
| Number of connector poles | 4 |
| Connector orientation | Straight / axial at both ends |
| Cable entry angle | 0° at both connectors |
| Connector mounting | Free-hanging / in-line |
| Connector termination | Factory fitted at both ends |
| Nominal operating voltage | 250 V |
| Rated operating current | 4 A |
| Rated surge voltage | 2 kV |
| Insulation resistance | ≥ 5 × 108 Ω/km |
| Conductor resistance | < 57 Ω/km |
| Number of conductors | 4 |
| Conductor arrangement | 2 twisted pairs |
| Conductor material | Bare copper |
| Conductor construction | 7 × 0.25 mm stranded wire |
| Conductor insulation | Halogen-free polyethylene (PE) |
| Cable shielding | Aluminium-laminated foil and tinned copper braid |
| Shield braid coverage | Approximately 85% |
| Cable jacket material | Polyurethane (PUR) |
| Cable jacket colour | Green |
| Connector housing material | Thermoplastic polyurethane (TPU) |
| Connector housing colour | Black (approximately RAL 9005) |
| Outer cable diameter | 6.3–6.7 mm |
| Minimum bending radius, single bend | 5 × cable diameter |
| Minimum bending radius, repeated movement | 7.5 × cable diameter |
| Drag-chain suitability | Yes |
| Bending endurance | Approximately 3 million cycles under specified conditions |
| Minimum drag-chain bending diameter | 200 mm |
| Operating temperature, static | −40 to +70 °C |
| Operating temperature, dynamic | −40 to +70 °C |
| Protection rating | IP67 when correctly connected |
| Pollution degree | 3/2 according to IEC 60664-1 |
| Connector tightening torque | 1 Nm |
| Oil resistance | Good |
| Ozone resistance | Good |
| UV resistance | Good |
| Chemical resistance | Good |
| Hydrolysis resistance | Good |
| Microbial resistance | Good |
| Halogen-free | Yes |
| Silicone-free | Yes |
| CFC-free | Yes |
| UL status | UL-listed cable material |
| RoHS compliance | Compliant |
| Weight | Approximately 140 g |
| Country of origin | Germany |
| GTIN | 4045454521837 |
The WAGO 756-1203/060-020 is a pre-assembled industrial Ethernet/PROFINET cable used to connect compatible automation devices through M12 D-coded Ethernet interfaces. It is suitable for PLC systems, remote I/O modules, industrial Ethernet switches and other networked industrial equipment.
The WAGO 756-1203/060-020 has a fixed cable length of 2 m. It is supplied with factory-fitted M12 D-coded male connectors at both ends, providing a ready-to-install cable assembly for compatible industrial Ethernet devices.
The cable features two straight, 4-pole M12 D-coded male connectors. Both connectors use a threaded M12 connection system designed for secure installation on compatible industrial Ethernet ports. The cable has a male-to-male configuration and is intended for connection between suitable M12 D-coded female interfaces.
Yes. The WAGO 756-1203/060-020 is designed for Ethernet and PROFINET IO communication. Its shielded Cat 5e cable construction and M12 D-coded connectors make it suitable for compatible industrial Ethernet and PROFINET network installations.
The cable uses a Category 5e (Cat 5e) shielded Ethernet cable with four conductors arranged in two twisted pairs. It is suitable for industrial Ethernet applications such as 100BASE-TX and PROFINET IO when used with compatible equipment.
Yes. The cable incorporates overlapping aluminium-laminated foil screening and a tinned copper braided shield with approximately 85% optical braid coverage. This shielding helps protect communication signals against electromagnetic interference in industrial automation environments.
The WAGO 756-1203/060-020 has an IP67 protection rating when the M12 connectors are correctly installed and mated with compatible IP67-rated connections. This provides protection against dust ingress and temporary water immersion under the applicable test conditions.
Yes. The WAGO 756-1203/060-020 is suitable for drag-chain applications and features a flexible polyurethane cable jacket. It is designed to withstand approximately 3 million bending cycles under specified operating conditions. The cable installation must comply with the manufacturer's bending radius, travel and movement requirements.
The cable is rated for an operating temperature range of −40 to +70 °C in both static and dynamic installations. This makes it suitable for a wide range of industrial environments, provided all installation and mechanical operating limits are observed.
Yes. The cable features a durable green polyurethane (PUR) outer sheath with good resistance to oil, ozone, UV radiation, hydrolysis, microbes and many chemicals. It is also halogen-free, silicone-free and CFC-free, making it suitable for demanding industrial applications.
The cable has an outer diameter of approximately 6.3–6.7 mm. Its minimum bending radius is 5 times the cable diameter for a single bend and 7.5 times the cable diameter for repeated movement, subject to the specific drag-chain installation requirements.
No. Both ends of the WAGO 756-1203/060-020 have M12 D-coded male connectors, not RJ45 connectors. To connect the cable to equipment with an RJ45 Ethernet socket, a suitable M12 D-coded to RJ45 adapter or cable assembly is required.
No. The WAGO 756-1203/060-020 is supplied as a complete, factory-assembled 2 m Ethernet cable with M12 D-coded male connectors already fitted at both ends. This simplifies installation and eliminates the need for on-site cable stripping, conductor termination or connector assembly.
The WAGO 756-1203/060-020 industrial Ethernet/PROFINET cable combines reliable Cat 5e data transmission, robust M12 D-coded connectivity, effective electromagnetic shielding and durable IP67-rated construction. With its flexible green PUR jacket, drag-chain suitability and resistance to demanding environmental conditions, it provides a dependable connection solution for industrial Ethernet networks, automation controllers and modern manufacturing equipment.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.