Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£193.91
The WAGO 750-940 is an industrial EnOcean RS-485 gateway operating at 868 MHz, designed to integrate wireless sensors and actuators into building automation and intelligent control systems. Supporting EnOcean wireless technology and RS-485 serial communication, it provides a flexible interface between battery-free wireless devices and compatible automation controllers, including the WAGO I/O System 750/753.
The gateway supports ESP3 telegram communication and Modbus protocol operation, allowing compatible EnOcean devices to exchange information with higher-level control systems. Its wireless transmission range is approximately 30 m indoors and more than 100 m in open space, depending on installation conditions. An integrated antenna provides wireless connectivity, while an SMA socket allows an optional external antenna to be connected.
Operating from a 24 V DC supply, the WAGO 750-940 supports RS-485 baud rates from 9.6 to 115.2 kBd and can connect up to 10 devices in series in Modbus mode. Its compact circular housing supports ceiling, wall or DIN rail mounting, making it suitable for building management, lighting automation, energy monitoring and wireless sensor integration.
The WAGO 750-940 enables compatible EnOcean wireless sensors and actuators to communicate with intelligent automation systems through an RS-485 interface. EnOcean technology is particularly useful in building automation because compatible energy-harvesting devices can operate without conventional replaceable batteries, reducing maintenance and simplifying installation in locations where running signal cables is difficult.
The gateway receives EnOcean wireless telegrams and transfers the information through its serial interface using ESP3 or Modbus communication. In ESP3 mode, the gateway operates using a point-to-point connection. In Modbus mode, up to 10 devices can be connected in series on a compatible RS-485 network, supporting distributed wireless coverage across larger installations.
The integrated antenna provides a practical wireless interface for typical indoor applications. Where installation conditions require an alternative antenna position, the external SMA antenna connection allows a suitable optional antenna to be fitted. Radio transmission range depends on building materials, obstacles, interference and antenna positioning.
The compact circular enclosure can be installed on a wall or ceiling to improve wireless coverage or mounted on a DIN rail using the integrated adapter. Its 24 V DC supply, PUSH WIRE® terminals and RS-485 communication make it suitable for integration into compatible industrial and building automation control systems.
| Number of HW-interfaces other | 1 |
|---|---|
| System accessory | Yes |
| Supporting protocol for other bus systems | Yes |
| Number of HW-interfaces RS-485 | 1 |
| SIL according to IEC 61508 | None |
| Degree of protection (IP) | IP30 |
| Supply voltage DC | 24 – 24 V |
| Suitable for rail mounting | Yes |
| Voltage type (supply voltage) | DC |
| Explosion safety category for gas | None |
| Explosion safety category for dust | None |
| Height | 100 mm |
| With potential separation | Yes |
| Performance level according to EN ISO 13849-1 | None |
| Width | 95 mm |
| Fieldbus connection over separate bus coupler possible | Yes |
| Depth | 95 mm |
| Manufacturer | WAGO |
| Model | 750-940 |
| Product type | EnOcean RS-485 wireless gateway |
| Associated system | WAGO I/O System 750/753 |
| Wireless technology | EnOcean |
| Wireless standard | ISO/IEC 14543-3-1x |
| Radio frequency | 868 MHz |
| Communication interface | RS-485 |
| Supported communication protocols | ESP3 and Modbus |
| Communication speed | 9.6–115.2 kBd |
| Data width | 50 bytes |
| Maximum devices in Modbus series connection | 10 |
| ESP3 connection arrangement | 1:1 |
| RS-485 cable length | Up to 100 m with suitable cabling |
| Indoor radio transmission range | Approximately 30 m |
| Open-space radio transmission range | More than 100 m |
| Antenna | Integrated internal antenna |
| External antenna connection | SMA socket |
| Nominal supply voltage | 24 V DC |
| Supply voltage range | 18–31.2 V DC |
| Maximum supply current | 40 mA |
| Overvoltage category | III |
| RS-485 connection | 5-pole compact PCB connector with PUSH WIRE® technology |
| RS-485 connector supplied | WAGO 252-155 |
| Power supply connection | 2-pole compact PCB connector with PUSH WIRE® technology |
| Power connector supplied | WAGO 252-152 |
| Compatible solid conductor cross-section | 0.4–0.8 mm² |
| Conductor size | 26–20 AWG |
| Wire stripping length | 6–7 mm |
| Mounting options | Ceiling, wall or DIN rail using integrated adapter |
| Housing shape | Circular |
| Dimensions (W × H × D) | 95 × 36 × 95 mm |
| Diameter | 95 mm |
| Weight | Approximately 97 g |
| Protection rating | IP30 |
| Operating temperature | 0 to +55 °C |
| Storage temperature | −20 to +85 °C |
| Pollution degree | 2 |
| EMC immunity | EN 61000-6-2 |
| EMC emissions | EN 61000-6-3 + A1 |
| Conformity marking | CE |
| Housing colour | White |
| Country of origin | Germany |
| GTIN | 4066966154894 |
The WAGO 750-940 is an EnOcean RS-485 gateway used to connect compatible battery-free wireless sensors and actuators to building automation and industrial control systems using ESP3 or Modbus communication.
The gateway operates on the 868 MHz EnOcean frequency band and supports compatible devices using EnOcean wireless technology.
The gateway provides an approximate wireless range of 30 m indoors and more than 100 m in open space. Actual range depends on building materials, obstacles, interference and antenna placement.
Yes. The WAGO 750-940 supports Modbus and ESP3 protocols through its RS-485 interface. Up to 10 gateways can be connected in series in Modbus mode, while ESP3 mode uses a 1:1 connection arrangement.
The gateway operates from a 24 V DC nominal supply, with a permitted voltage range of 18–31.2 V DC. It can be mounted on a wall, ceiling or DIN rail using its integrated mounting adapter.
The WAGO 750-940 EnOcean RS-485 gateway provides a practical interface between 868 MHz battery-free wireless devices and wired automation networks. Combining ESP3 and Modbus communication, flexible antenna options and versatile mounting arrangements, it supports efficient wireless sensor integration in building management and industrial monitoring applications.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.