Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£324.02
The WAGO 750-653/000-006 is a compact RS-485 serial communication interface module designed to connect industrial serial devices to compatible WAGO I/O System 750 automation stations. Operating at a fixed transmission rate of 19,200 baud, the module provides a reliable communication interface between serial equipment and programmable logic controllers (PLCs), fieldbus couplers and industrial control systems.
This specialised variant features a predefined 8N1 serial communication format, consisting of eight data bits, no parity and one stop bit. It supports five bytes of serial user data in each process-image direction, together with a control or status byte. This six-byte process-image structure simplifies integration with compatible WAGO controllers and fieldbus systems that support the module's standard serial data format.
The WAGO 750-653/000-006 uses differential RS-485 signalling for communication in electrically demanding industrial environments. Its interface supports half-duplex and full-duplex operation, allowing suitable serial devices to exchange information through a WAGO I/O station. The compact DIN-rail module is particularly useful for connecting industrial instruments, communication devices and existing RS-485 equipment to modular automation systems.
RS-485 is widely used in industrial automation because differential signalling allows reliable data communication in environments where electrical noise may be present. The WAGO 750-653/000-006 provides an interface between compatible RS-485 serial equipment and the internal communication system of a WAGO 750 Series I/O station.
The module operates at a fixed 19,200 baud with no parity, eight data bits and one stop bit. These communication parameters must match the connected serial equipment. Its predefined configuration is useful where the serial device and controller application have been designed around this specific communication format.
The 750-653/000-006 uses a five-byte user data format, which distinguishes it from WAGO 750-653 variants using alternative process-image structures. In each direction, the process image contains five serial data bytes and one control or status byte, resulting in six bytes mapped as three words. The control and status information is used to coordinate serial data transfer between the module and the automation application.
The RS-485 interface supports half-duplex and full-duplex communication. Half-duplex systems share the communication path between transmission and reception, while full-duplex arrangements use separate transmit and receive signal pairs. The appropriate connection arrangement depends on the connected device and the communication network design.
When integrated with a compatible WAGO fieldbus coupler or controller, the serial interface operates independently of the higher-level fieldbus communication channel. This allows an automation system to exchange serial data with connected equipment without requiring the serial device itself to support the main PLC network protocol.
The module does not include field power jumper contacts. If downstream I/O modules require field supply distribution, a suitable WAGO supply module must be incorporated into the I/O station. Correct RS-485 wiring, shielding, termination and communication parameter matching are essential for dependable operation.
| Manufacturer | WAGO |
|---|---|
| Series | WAGO I/O System 750 |
| Model | 750-653/000-006 |
| Product type | Serial communication interface module |
| Communication interface | RS-485 |
| Number of serial interfaces | 1 |
| Transmission rate | 19,200 baud |
| Baud rate configuration | Fixed |
| Parity | None |
| Data bits | 8 |
| Stop bits | 1 |
| Serial communication format | 19200/N/8/1 |
| Transmission modes | Half-duplex and full-duplex |
| Electrical signalling | Differential RS-485 |
| Transmit interface | TxD |
| Receive interface | RxD |
| Signal connections | Differential transmit and receive connections, signal reference and shield |
| Serial user data | 5 bytes per process-image direction |
| Control/status information | 1 byte per direction |
| Input process image | 6 bytes |
| Output process image | 6 bytes |
| Process-image allocation | 3 words per direction |
| Communication handling | Via compatible WAGO fieldbus coupler or controller |
| System power supply | Via internal WAGO I/O system bus |
| Internal system voltage | 5 V DC |
| Field power jumper contacts | Not provided |
| Communication indication | Operational status, TxD and RxD LEDs |
| Connection technology | CAGE CLAMP® |
| Mounting | 35 mm DIN rail within a compatible WAGO I/O station |
| Protection rating | IP20 |
| Operating temperature | 0 to +55 °C |
| Installation environment | Industrial control cabinet or suitable protective enclosure |
| Applicable interface standard | TIA/EIA-485 |
The WAGO 750-653/000-006 is an RS-485 serial interface module used to connect compatible serial communication devices to WAGO I/O System 750 automation stations. It enables data exchange between connected RS-485 equipment and a compatible PLC or fieldbus controller.
The module operates at a fixed 19,200 baud with no parity, eight data bits and one stop bit. This configuration is commonly described as 19200/N/8/1 or 8N1. Connected serial equipment must use matching communication parameters.
The module supports five serial user data bytes in each process-image direction, together with one control or status byte. This produces a six-byte input process image and six-byte output process image, each occupying three words in a compatible controller.
Yes. The WAGO 750-653 serial interface family supports half-duplex and full-duplex operation. The correct wiring configuration depends on the connected RS-485 device and the communication network arrangement.
No. The WAGO 750-653/000-006 does not include field power jumper contacts. It receives its internal operating power through the WAGO I/O system bus. If downstream modules require field supply distribution, a compatible supply module must be installed in the I/O station.
WAGO I/O System 750 communication modules provide flexible connectivity for industrial automation engineers, machine builders and control system integrators. The WAGO 750-653/000-006 combines differential RS-485 communication, fixed 19,200 baud operation, an 8N1 serial format and five-byte user data exchange to support dependable integration of serial devices into modular PLC automation systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.