Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£50.34
The WAGO 706-7753/304-100 is a compact and reliable 1 m industrial system cable designed to connect compatible WAGO I/O System 750 modules to external interface adapters in industrial automation systems. Featuring one 20-pole female connector and two 14-pole female connectors, this pre-assembled cable provides an organised connection solution for applications involving two groups of eight analogue input or output signals.
Designed to simplify industrial control cabinet wiring, the WAGO 706-7753/304-100 provides a convenient alternative to individually wiring multiple signal connections. Its pluggable connectors conform to DIN 41651, while the flexible LiYY cable uses colour-coded conductors according to DIN VDE 47100. This configuration supports efficient installation, consistent signal identification and straightforward maintenance in compatible industrial automation assemblies.
With a cable length of 1 m, a conductor cross-section of 0.14 mm² and a maximum current of 1 A per conductor, the WAGO 706-7753/304-100 is suitable for compatible low-voltage signal wiring. Its 20-pole-to-dual-14-pole connector arrangement makes it a practical solution for connecting WAGO I/O modules to compatible interface adapters in industrial control panels and machinery.
System cables such as the WAGO 706-7753/304-100 provide a convenient method of connecting programmable logic controller I/O modules to compatible interface adapters. By using pre-assembled connectors and an organised conductor arrangement, they help reduce wiring complexity, improve signal identification and support efficient installation in industrial control cabinets.
The WAGO I/O System 750 supports a wide range of industrial automation applications. The 706-7753/304-100 is designed for configurations involving two groups of eight analogue inputs or outputs, using a 20-pole connector and two 14-pole connectors. It is suitable for system wiring when paired with compatible WAGO interface adapters, including applicable JUMPFLEX® interface solutions. Always verify the precise module compatibility, connector pin assignment and electrical ratings before installation.
| Suitable for input board PLC | Yes |
|---|---|
| Type of electrical connection, field-sided | Other |
| Type of electrical connection, box-sided | Other |
| Suitable for output card PLC | Yes |
| Function | PLC - other devices |
| Suitable for digital signals | Yes |
| Suitable for analogue signals | Yes |
| Number of poles | 20 |
| Length | 1 m |
| Manufacturer | WAGO |
| Product series | WAGO I/O System 750 system wiring |
| Model | 706-7753/304-100 |
| Product type | Industrial system cable |
| Application | Analogue input and output system wiring |
| Compatible system | WAGO I/O System 750 |
| Signal configuration | 2 × 8 analogue inputs or outputs |
| Cable length | 1 m |
| Connector configuration | 1 × 20-pole and 2 × 14-pole connectors |
| Connector gender | Female connectors |
| Connector standard | DIN 41651 |
| Cable type | LiYY |
| Conductor cross-section | 0.14 mm² |
| Conductor colour coding | DIN VDE 47100 |
| Maximum operating voltage | 35 V AC/DC |
| Maximum current per conductor | 1 A |
| Reduced current rating | 0.7 A per conductor when more than 10 conductors are simultaneously loaded |
| Protection rating | IP20 |
| Operating temperature | -25 to +70 °C |
| Shielding | Unshielded |
| Product category | Industrial automation system cables |
The WAGO 706-7753/304-100 is a 1 m industrial system cable used to connect compatible WAGO I/O System 750 modules to interface adapters. Its connector configuration supports two groups of eight analogue input or output signals.
The cable features one 20-pole female connector and two 14-pole female connectors conforming to DIN 41651. The connectors must be matched with compatible WAGO I/O modules and interface adapters.
The WAGO 706-7753/304-100 has a cable length of 1 m, making it suitable for connecting compatible automation modules and interface adapters within an industrial control cabinet or machine assembly.
The cable uses 0.14 mm² LiYY conductors with colour coding according to DIN VDE 47100. This arrangement supports organised signal wiring and consistent conductor identification.
The maximum current is 1 A per conductor. When more than 10 conductors are simultaneously loaded, the maximum current per conductor must be reduced to 0.7 A in accordance with the manufacturer's specifications.
The cable is designed for compatible WAGO I/O System 750 modules and interface adapters supporting the specified analogue signal configuration and connector arrangement. Verify the exact module part numbers, connector pin assignments and electrical requirements before connecting the cable.
The WAGO 706-7753/304-100 has an IP20 protection rating and an operating temperature range of -25 to +70 °C. The installation must provide suitable environmental protection for the intended application.
WAGO system cables provide convenient, standardised connectivity for industrial automation equipment, helping engineers simplify analogue I/O wiring, connect compatible interface adapters and maintain organised electrical installations in modern control panels and machinery.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.