Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£48.81
The WAGO 706-7753/302-200 is a reliable 2 m industrial system cable designed to connect WAGO I/O modules to compatible interface and relay modules in industrial automation systems. Part of the WAGO system wiring range, this cable features one 20-pole female connector and two 10-pole female connectors, providing a convenient connection between a WAGO I/O module and two compatible 8-channel interface or relay modules.
Designed to simplify industrial control cabinet wiring, the WAGO 706-7753/302-200 eliminates the need to assemble multiple individual signal connections between compatible automation components. Its pluggable connectors conform to DIN 41651, while the integrated cable assembly supports organised signal transmission between digital input and output modules. The standardised colour coding follows DIN VDE 47100, helping maintain consistent wiring identification during installation and maintenance.
With a cable length of 2 m, a conductor cross-section of 0.14 mm² and a maximum current of 1 A per conductor, the WAGO 706-7753/302-200 is designed for compatible WAGO I/O systems supporting eight digital inputs and eight digital outputs. Its 20-pole-to-dual-10-pole configuration makes it a practical solution for connecting automation controllers to two compatible interface modules in industrial control applications.
System cables such as the WAGO 706-7753/302-200 provide a convenient method of connecting programmable logic controller I/O modules to compatible interface and relay modules. By using pre-assembled connectors and an organised conductor arrangement, these cables help reduce wiring complexity, minimise installation effort and maintain consistent connections throughout industrial control systems.
The WAGO I/O System 750 supports a wide range of industrial automation applications. The 706-7753/302-200 is designed for configurations using eight digital inputs and eight digital outputs, with one 20-pole connector interfacing with the I/O side and two 10-pole connectors connecting compatible modules. Before installation, verify the connector pin assignment, module compatibility and current requirements against the manufacturer's documentation to ensure correct signal routing.
| Suitable for input board PLC | Yes |
|---|---|
| Type of electrical connection, field-sided | Other |
| Type of electrical connection, box-sided | Other |
| Suitable for output card PLC | Yes |
| Function | PLC - other devices |
| Suitable for digital signals | Yes |
| Suitable for analogue signals | Yes |
| Number of poles | 20 |
| Length | 2 m |
| Manufacturer | WAGO |
| Product series | WAGO I/O System 750 system wiring |
| Model | 706-7753/302-200 |
| Product type | Industrial system cable |
| Application | Digital input and output system wiring |
| Compatible system | WAGO I/O System 750 |
| Supported signal configuration | 8 digital inputs and 8 digital outputs |
| Cable length | 2 m |
| Connector configuration | 1 × 20-pole / 2 × 10-pole |
| Connector gender | Female connectors |
| Connector type | Pluggable connector conforming to DIN 41651 |
| Conductor cross-section | 0.14 mm² |
| Cable type | LiYY |
| Colour coding | DIN VDE 47100 |
| Maximum current per conductor | 1 A |
| Operating temperature | Approximately -20 to +50 °C |
| Protection rating | Not specified here; verify the applicable manufacturer's documentation for the complete assembly. |
| Product category | Industrial control system cables and accessories |
| Customs tariff number | 85444290900 |
| Packaging quantity | 1 piece |
The WAGO 706-7753/302-200 is a 2 m industrial system cable used to connect compatible WAGO I/O System 750 modules to interface or relay modules. Its connector arrangement supports applications involving eight digital inputs and eight digital outputs.
The cable features one 20-pole female connector and two 10-pole female connectors. The connectors conform to DIN 41651 and must be matched with compatible WAGO I/O and interface modules.
The WAGO 706-7753/302-200 has a cable length of 2 m, providing a convenient connection between compatible automation modules installed within an industrial control cabinet or machine assembly.
The cable uses 0.14 mm² LiYY conductors, with colour coding according to DIN VDE 47100. This arrangement supports organised signal wiring between compatible digital I/O and interface modules.
The specified maximum current is 1 A per conductor. When more than ten conductors carry current simultaneously, the manufacturer's documentation specifies that the maximum current per conductor must be reduced to 0.7 A. Always check the applicable operating conditions and wiring requirements before installation.
The cable is intended for compatible WAGO I/O System 750 modules supporting eight digital inputs and eight digital outputs, together with suitable interface or relay modules featuring compatible 20-pole and 10-pole connectors. Verify the exact module part numbers and pin assignments before connecting the cable.
WAGO system cables provide convenient, standardised connectivity for industrial automation equipment, helping engineers simplify I/O wiring, connect compatible interface modules and maintain organised electrical installations in modern control panels and machinery.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.