706-3057/300-300 Wago Wago Ribbon Cable 20/20, Length 3 M

706-3057/300-300 Wago Wago Ribbon Cable 20/20, Length 3 M

SKU: 706-3057/300-300MPN: 706-3057/300-300
Price
List Price £49.97 ex VAT
Your Price (ex VAT) Save 10%
£44.97 10% OFF
You save £5.00 per unit
Manufacturer Lead Time Please contact us for a delivery time before you order
Get the best trade prices Trade exclusive

Create an online account to unlock exclusive pricing, special offers and more.

Create an online account Quick & easy setup
SUBTOTAL (EX VAT) £44.97
Trade pricing is personalised to your account

Manufacturer Lead Time

£44.97

Why Choose the WAGO 706-3057/300-300 Schneider TSX System Cable?

The WAGO 706-3057/300-300 is a pre-assembled 3 m industrial system cable for Schneider TSX automation equipment, designed to connect compatible PLC digital input or output modules to industrial interface and relay modules. Part of the WAGO 706 Series, this cable supports 16 digital inputs or outputs through standardised plug-in connections, providing an organised solution for control cabinet system wiring.

Equipped with a 20-pole female DIN 41651 connector at each end, the WAGO 706-3057/300-300 simplifies connections between compatible electronic modules. Its 0.14 mm² conductors are incorporated into a LiYY multicore cable with conductor colour coding according to DIN VDE 47100. The factory-assembled connectors eliminate the need to terminate individual conductors at the cable ends, helping reduce installation time and improve wiring consistency.

The cable supports an operating voltage of up to 35 V AC/DC and a maximum current of 1 A per wire. When more than 10 wires are used, the permissible current must be reduced to 0.7 A per wire. With a 3 m cable length, the WAGO 706-3057/300-300 is suitable for industrial automation installations requiring a practical connection between PLC equipment and compatible interface modules.

Key Advantages

  • Designed for Schneider TSX systems and compatible industrial automation equipment.
  • Supports 16 digital inputs or outputs for multi-channel control system wiring.
  • 3 m cable length provides flexibility when positioning equipment inside electrical cabinets.
  • 20-pole female DIN 41651 connectors at both ends provide standardised plug-in connections.
  • Pre-assembled construction reduces individual conductor termination work.
  • 0.14 mm² conductors provide compact wiring for low-current control signals.
  • LiYY multicore cable offers an organised connection between compatible modules.
  • DIN VDE 47100 conductor colour coding supports consistent conductor identification.
  • Maximum operating voltage of 35 V AC/DC accommodates appropriately rated industrial signal circuits.
  • Maximum current of 1 A per wire, subject to conductor loading restrictions.
  • Compatible with selected WAGO I/O modules equipped with 20-pole system connectors.
  • Plug-in connections support straightforward installation, servicing and equipment replacement.
  • Suitable for 16-channel interface and relay modules with compatible connector arrangements.

Key Features

  • WAGO 706 Series system wiring cable.
  • Schneider TSX system compatibility.
  • 16 digital input or output channels.
  • 20-pole female connector at each end.
  • DIN 41651 connector standard.
  • Female-to-female connector configuration.
  • 3 m cable length.
  • 0.14 mm² conductor cross-section.
  • LiYY multicore cable construction.
  • Conductor colour coding according to DIN VDE 47100.
  • Maximum operating voltage of 35 V AC/DC.
  • Maximum current of 1 A per wire.
  • Reduced maximum current of 0.7 A per wire when more than 10 wires are used.
  • Operating temperature range of −20 to +50 °C.
  • Pre-terminated plug-in system wiring connections.
  • Suitable for compatible WAGO 750 Series I/O modules.
  • RoHS compliant without exemption.

Reliable 16-Channel System Wiring for Industrial Automation

The WAGO 706-3057/300-300 provides a practical connection between compatible PLC digital input/output equipment and industrial interface modules. Its 20-pole female DIN 41651 connectors allow the cable to connect directly to suitable male headers, providing a convenient alternative to individually terminated control wiring.

Designed for 16 digital input or output signals, the cable supports Schneider TSX system wiring and selected WAGO I/O applications. WAGO identifies compatibility with I/O modules equipped with 20-pole connectors, including the 750-1400, 750-1402, 750-1500, 750-1501 and 750-1502, when connected to suitable 16-channel interface or relay modules. The specific module configuration and pin assignment must be checked before installation.

The cable uses 0.14 mm² LiYY conductors with colour coding according to DIN VDE 47100. Its 3 m length provides flexibility when routing connections between control cabinet components. Factory-assembled connectors help maintain a consistent connection arrangement and simplify replacement of compatible cable assemblies during maintenance.

The electrical ratings must be considered when designing the complete installation. The cable supports up to 35 V AC/DC and a maximum current of 1 A per wire. When more than 10 conductors are used, the permissible current must be reduced to 0.7 A per wire. This is a passive connection cable and does not provide signal conversion, electrical isolation, circuit protection or programmable control functionality.

Typical Applications

  • Schneider TSX PLC digital input and output connections.
  • WAGO 750 Series I/O system wiring.
  • 16-channel industrial interface module connections.
  • Industrial relay module interconnections.
  • PLC-to-interface cable assemblies.
  • Factory automation and production machinery.
  • Industrial electrical control cabinets.
  • Low-voltage digital signal distribution.
  • OEM machine control system construction.
  • Multi-channel sensor and actuator signal wiring.
  • Industrial equipment commissioning and maintenance.
  • Control panel refurbishment and automation upgrades.

Technical Specifications

Suitable for input board PLC Yes
Type of electrical connection, field-sided Other
Type of electrical connection, box-sided Other
Suitable for output card PLC Yes
Function PLC - other devices
Suitable for digital signals Yes
Suitable for analogue signals Yes
Number of poles 20
Length 3 m
Manufacturer WAGO
Series 706 Series System Wiring
Model 706-3057/300-300
Product type Pre-assembled industrial system cable
Primary application Schneider TSX PLC system wiring
Signal configuration 16 digital inputs or outputs
Connector 1 20-pole female connector
Connector 2 20-pole female connector
Connector standard DIN 41651
Connector configuration Female to female
Connection type System wiring
Cable length 3 m
Cable type LiYY
Conductor cross-section 0.14 mm²
Conductor identification DIN VDE 47100 colour coding
Operating voltage ≤35 V AC/DC
Maximum current per wire 1 A
Maximum current with more than 10 wires in use 0.7 A per wire
Compatible equipment family Schneider TSX
Compatible WAGO I/O modules 750-1400, 750-1402, 750-1500, 750-1501 and 750-1502, subject to application compatibility
Compatible interface type 16-channel interface or relay module with 20-pole connector
Ambient operating temperature −20 to +50 °C
Weight Approximately 231.4 g
RoHS compliance Compliant without exemption
Country of origin France
GTIN / EAN 4045454873783

Frequently Asked Questions

What is the WAGO 706-3057/300-300 used for?

The WAGO 706-3057/300-300 is a pre-assembled industrial system cable designed for Schneider TSX automation equipment and compatible WAGO I/O systems. It supports 16 digital inputs or outputs and provides plug-in connections between compatible PLC modules and industrial interface or relay modules.

What connectors are fitted to the WAGO 706-3057/300-300?

The cable features a 20-pole female DIN 41651 connector at each end. Both connectors are designed to mate with compatible male headers on suitable industrial automation equipment.

What is the cable length and conductor size of the WAGO 706-3057/300-300?

The WAGO 706-3057/300-300 has a cable length of 3 m and uses 0.14 mm² conductors. It is constructed from LiYY multicore cable with conductor colour coding according to DIN VDE 47100.

What voltage and current ratings apply to the WAGO 706-3057/300-300?

The maximum operating voltage is 35 V AC/DC, and the maximum current is 1 A per wire. When more than 10 wires are used, the permissible current must be reduced to 0.7 A per wire, in accordance with WAGO's technical specifications.

Can the WAGO 706-3057/300-300 be used with WAGO 750 Series I/O modules?

Yes. WAGO identifies the cable for compatible system wiring applications involving selected 750 Series I/O modules, including the 750-1400, 750-1402, 750-1500, 750-1501 and 750-1502. The associated interface or relay module must have a compatible 20-pole connector, and the pin assignment and electrical requirements must be checked before installation.

Trusted by Industrial Automation Professionals

WAGO 706 Series system cables provide organised, dependable connections for industrial automation equipment. The WAGO 706-3057/300-300 combines a practical 3 m cable length, 20-pole DIN 41651 female connectors, 0.14 mm² conductors and 16-channel digital I/O compatibility to support efficient control cabinet wiring, straightforward installation and convenient equipment maintenance.