Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£41.36
The WAGO 706-3057/300-200 is a pre-assembled 20-pole industrial system cable designed for reliable connections between compatible programmable logic controllers (PLCs), digital input/output modules and industrial interface equipment. Featuring a 20-pole female connector at each end, the cable supports system wiring arrangements for 16 digital inputs or outputs, making it a practical solution for industrial automation and control cabinet installations.
With a nominal length of 2 m, the WAGO 706-3057/300-200 provides additional routing flexibility compared with shorter system cables, allowing compatible devices to be positioned conveniently within an electrical enclosure. Its 0.14 mm² conductors and factory-fitted connectors reduce the need for individual conductor termination, helping control panel builders achieve more consistent wiring layouts and efficient installation.
Developed for Schneider TSX system wiring applications and suitable WAGO automation interfaces, this cable supports an operating voltage of up to 35 V AC/DC and a maximum current of 1 A per conductor. Where more than ten conductors are loaded, the permissible current is reduced to 0.7 A per conductor. The WAGO 706-3057/300-200 combines convenient plug-in connectivity with dependable passive signal transmission for industrial control systems.
The WAGO 706-3057/300-200 simplifies the connection of compatible PLC digital input/output modules to industrial interface or relay modules. Its 20-pole female connectors allow compatible devices to be linked using a pre-assembled cable rather than individually terminated signal wires. This arrangement is particularly useful for 16-channel digital I/O systems, where consistent wiring, efficient installation and straightforward maintenance are important.
WAGO identifies this system cable family for use with compatible WAGO-I/O-SYSTEM modules 750-1400, 750-1402, 750-1500, 750-1501 and 750-1502, together with appropriate 16-channel interface or relay modules. The cable is also described for Schneider TSX applications. As a passive connection assembly, it does not provide electrical isolation, signal amplification or conversion. Installers should verify the connector pin assignment, connected equipment and electrical loading requirements before commissioning, particularly when more than ten conductors carry current simultaneously.
| Suitable for input board PLC | Yes |
|---|---|
| Type of electrical connection, field-sided | Other |
| Type of electrical connection, box-sided | Other |
| Suitable for output card PLC | Yes |
| Function | PLC - other devices |
| Suitable for digital signals | Yes |
| Suitable for analogue signals | Yes |
| Number of poles | 20 |
| Length | 2 m |
| Manufacturer | WAGO |
| Series | 706 Series |
| Manufacturer part number | 706-3057/300-200 |
| Product type | Industrial PLC system connection cable |
| Manufacturer product description | System cable for Schneider TSX |
| Primary function | Digital input/output system wiring |
| Supported signal arrangement | 16 digital inputs or outputs |
| Connection 1 | 20-pole female pluggable connector |
| Connection 2 | 20-pole female pluggable connector |
| Connector configuration | Female to female |
| Connector arrangement | 20/20 system connection |
| Connection type | Pre-assembled connectors at both ends |
| Cable length | 2 m |
| Conductor cross-section | 0.14 mm² |
| Maximum operating voltage | 35 V AC/DC |
| Maximum current per conductor | 1 A |
| Maximum current per conductor with more than 10 loaded conductors | 0.7 A |
| Compatible controller family | Schneider TSX |
| Compatible WAGO module examples | 750-1400, 750-1402, 750-1500, 750-1501 and 750-1502 |
| Compatible interface equipment | Suitable 16-channel interface or relay modules with matching 20-pole connectors |
| Product weight | approx. 161 g |
| GTIN / EAN | 4045454873776 |
| Packaging unit | 1 piece |
The WAGO 706-3057/300-200 is a pre-assembled industrial system cable designed to connect compatible PLC digital input/output modules to suitable interface or relay modules. It supports wiring arrangements for 16 digital inputs or outputs and is intended for Schneider TSX and compatible WAGO automation applications.
The cable features a 20-pole female pluggable connector at each end. This 20/20 female-to-female arrangement is intended for compatible male system connectors on industrial automation equipment.
The WAGO 706-3057/300-200 has a nominal cable length of 2 m and uses conductors with a cross-sectional area of 0.14 mm². The 2-metre length provides flexibility for routing between compatible devices in industrial control cabinets.
The cable supports an operating voltage of up to 35 V AC/DC and a maximum current of 1 A per conductor. When more than ten conductors are loaded, the maximum current must be reduced to 0.7 A per conductor in accordance with the manufacturer's guidance.
The cable is designed for Schneider TSX system wiring and is suitable for selected WAGO-I/O-SYSTEM modules, including 750-1400, 750-1402, 750-1500, 750-1501 and 750-1502, when connected to compatible 16-channel interface or relay modules. The complete connector arrangement and pin assignment must be verified before installation.
WAGO 706 Series system cables provide automation engineers, electrical panel builders and OEM manufacturers with practical pre-assembled wiring solutions for industrial control systems. The WAGO 706-3057/300-200 combines two 20-pole female connectors, a 2-metre cable length and 0.14 mm² conductors to support organised digital signal connections between compatible PLC modules and industrial interface equipment.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.