Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£39.42
The WAGO 706-3057/300-100 is a pre-assembled 20-pole industrial system connection cable designed to simplify signal wiring between compatible programmable logic controllers (PLCs), interface modules and industrial automation equipment. Featuring a 20-pole DIN 41651 female connector at each end, this cable provides a convenient connection solution for systems requiring organised transmission of up to 16 digital input or output signals.
With a nominal cable length of 1 m, the WAGO 706-3057/300-100 is particularly suitable for connections between adjacent or closely positioned devices inside electrical control cabinets. Its LiYY multicore cable construction incorporates 0.14 mm² conductors with colour identification according to DIN VDE 47100. The factory-assembled connectors help reduce installation time and eliminate the need to terminate individual conductors at the system interface.
Designed for compatible Schneider TSX and Modicon Quantum systems, as well as selected WAGO-I/O-SYSTEM 750 Series modules, this cable offers a practical solution for industrial control system wiring. It supports operating voltages up to 35 V AC/DC and a maximum current of 1 A per conductor, subject to the manufacturer's loading requirements. Its compact, pre-terminated construction makes it suitable for new automation installations, control panel assembly and maintenance of existing PLC systems.
The WAGO 706-3057/300-100 provides a convenient connection between compatible industrial control devices equipped with 20-pole DIN 41651 male connectors. By using a pre-assembled cable with matching female connectors, control panel builders can reduce repetitive wiring tasks and establish organised connections between PLC digital I/O modules and suitable interface or relay modules. The cable is particularly useful in applications where 16 digital signals must be routed through a compact connector system.
The cable is intended for compatible Schneider TSX and Modicon Quantum PLC installations and selected WAGO-I/O-SYSTEM 750 Series applications. Examples of compatible WAGO modules identified in manufacturer documentation include 750-1400, 750-1500 and 750-1502. The WAGO 706-3057/300-100 is a passive system cable; it does not perform signal conversion, isolation or digital I/O processing. Installers should verify connector compatibility, signal assignments and the electrical ratings of the connected equipment before commissioning.
| Suitable for input board PLC | Yes |
|---|---|
| Type of electrical connection, field-sided | Other |
| Type of electrical connection, box-sided | Other |
| Suitable for output card PLC | Yes |
| Function | PLC - other devices |
| Suitable for digital signals | Yes |
| Suitable for analogue signals | Yes |
| Number of poles | 20 |
| Length | 1 m |
| Manufacturer | WAGO |
| Series | 706 Series |
| Manufacturer part number | 706-3057/300-100 |
| Product type | Industrial system connection cable |
| Primary application | PLC and digital I/O system wiring |
| Supported signal arrangement | 16 digital inputs or outputs |
| Connection 1 | DIN 41651 female pluggable connector |
| Connection 1 pole count | 20 |
| Connection 2 | DIN 41651 female pluggable connector |
| Connection 2 pole count | 20 |
| Connector configuration | Female to female |
| Connection type | System connection at both ends |
| Cable length | 1 m |
| Cable type | LiYY |
| Conductor cross-section | 0.14 mm² |
| Conductor colour coding | DIN VDE 47100 |
| Maximum operating voltage | 35 V AC/DC |
| Maximum current per conductor | 1 A |
| Maximum current per conductor when more than 10 conductors are loaded | 0.7 A |
| Degree of protection | IP20 |
| Operating temperature | −20 to +50 °C |
| Weight | approx. 93 g |
| Compatible Schneider PLC families | TSX and Modicon Quantum |
| Compatible WAGO PLC family | WAGO-I/O-SYSTEM 750 Series |
| Country of origin | France |
| GTIN / EAN | 4045454873752 |
| Packaging unit | 1 piece |
The WAGO 706-3057/300-100 is a 20-pole industrial system cable designed to connect compatible PLC modules and interface equipment. It supports system wiring arrangements for 16 digital inputs or outputs and is suitable for selected Schneider and WAGO automation systems.
The cable features a 20-pole DIN 41651 female connector at each end. This female-to-female arrangement is designed for compatible male DIN 41651 system connectors.
The WAGO 706-3057/300-100 has a nominal length of 1 m. It uses 0.14 mm² LiYY conductors with colour identification according to DIN VDE 47100.
The cable supports operating voltages up to 35 V AC/DC and a maximum current of 1 A per conductor. When more than ten conductors are loaded, the maximum permissible current is reduced to 0.7 A per conductor, according to the manufacturer's loading guidance.
The cable is designed for compatible Schneider TSX and Modicon Quantum systems and selected WAGO-I/O-SYSTEM 750 Series modules, including WAGO 750-1400, 750-1500 and 750-1502. The exact connector configuration, pin assignment and system wiring requirements must be verified before installation.
WAGO 706 Series system cables provide industrial automation engineers, control panel builders and OEM manufacturers with dependable, pre-assembled electrical connection solutions. The WAGO 706-3057/300-100 combines two 20-pole DIN 41651 female connectors, a practical 1-metre cable length and 0.14 mm² conductors to support efficient digital signal wiring between compatible Schneider and WAGO industrial automation systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.