Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£176.19
The WAGO 706-2300/300-100 is a 1 m preassembled PLC system cable designed for connecting compatible Siemens SIMATIC S7-300 digital input or output modules to WAGO system wiring interface modules. Part of the WAGO 706 Series, it provides a dedicated connection solution for 16 digital input or output signals, helping simplify wiring between PLC hardware and industrial control interfaces.
Featuring 20-position connectors and conductors with a cross-sectional area of 0.14 mm², the cable is designed for use with compatible Siemens S7-300 modules and WAGO interface electronics. Its preassembled construction eliminates the need to terminate individual conductors between the PLC and the matching interface module, helping reduce installation time and wiring errors.
With a 1 m cable length, the WAGO 706-2300/300-100 is suitable for short connections within electrical control cabinets. It provides an organised system wiring solution for industrial automation, machinery control and PLC input/output distribution.
The WAGO 706-2300/300-100 is designed to provide a convenient connection between Siemens SIMATIC S7-300 digital I/O modules and compatible WAGO interface electronics. Instead of manually wiring each signal from the PLC connector to an interface module, installers can use a preassembled cable with the required connector arrangement.
The cable is intended for 16 digital inputs or outputs, making it suitable for compatible 16-channel PLC interface arrangements. Its 20-position connector configuration provides the necessary multi-pole connection format for the intended system wiring application. Correct operation depends on selecting the appropriate Siemens PLC module and matching WAGO interface module.
The 1 m cable length makes the WAGO 706-2300/300-100 particularly suitable for installations where the PLC and interface module are mounted relatively close together within the same control cabinet. This can help minimise unnecessary cable routing while maintaining a structured connection between control equipment.
Its 0.14 mm² conductors and factory-assembled connectors provide a dedicated solution for compatible digital signal applications. By using standardised system cables, panel builders can simplify installation, reduce repetitive termination work and make future replacement or maintenance more straightforward.
The WAGO 706-2300/300-100 is listed as a compatible system cable for selected WAGO 704 Series interface modules, including WAGO 704-5024, 704-5044 and 704-5074. These interface modules provide field-side connection facilities for industrial control applications, while the system cable provides the dedicated connection to the compatible Siemens S7-300 PLC hardware.
Because different Siemens S7-300 modules and WAGO interface modules use different signal assignments, compatibility must be verified using the exact module references and wiring documentation. A matching connector shape or pole count alone does not guarantee the correct signal allocation.
Before installation, verify that the WAGO 706-2300/300-100 is specified for the selected Siemens S7-300 PLC module and WAGO interface assembly. Route the cable without excessive bending, crushing or tensile stress, and ensure that both connectors are fully seated and mechanically secured where applicable.
Observe the cable's 60 V AC/DC voltage rating and 1 A current rating, together with any lower limits imposed by the connected PLC or interface equipment. The cable is intended for compatible signal wiring and must not be used as a general-purpose mains power cable. Installation and maintenance should be carried out with the relevant circuits safely isolated.
| Suitable for input board PLC | Yes |
|---|---|
| Type of electrical connection, field-sided | Connection plug board |
| Type of electrical connection, box-sided | Connection plug board |
| Suitable for output card PLC | Yes |
| Function | PLC - other devices |
| Suitable for digital signals | Yes |
| Suitable for analogue signals | Yes |
| Number of poles | 20 |
| Length | 1 m |
| Manufacturer | WAGO |
| Series | 706 Series |
| Part number | 706-2300/300-100 |
| Product type | PLC system cable assembly |
| Product category | Industrial automation system cables |
| Intended PLC family | Siemens SIMATIC S7-300 |
| Signal application | 16 digital inputs or outputs |
| Cable length | 1 m |
| Cable length in feet | Approximately 3.28 ft |
| Conductor cross-section | 0.14 mm² |
| Conductor size | 26 AWG |
| Number of connector positions | 20 |
| Controller-side connection | Siemens S7-300-compatible multi-pole connector |
| Controller-side connector reference | 6ES7 392-1BJ00-0AA0 |
| Process-side connection | Rectangular multi-pole connector |
| Process-side connector standard | DIN 41651 |
| Connector arrangement | Female / female |
| Voltage rating | 60 V AC/DC |
| Current rating | 1 A |
| Assembly type | Preassembled system cable |
| Compatible interface family | Selected WAGO 704 Series modules |
| Net weight | Approximately 146 g |
| GTIN / EAN | 4045454873844 |
| Country of origin | France |
The WAGO 706-2300/300-100 is a preassembled PLC system cable designed to connect compatible Siemens SIMATIC S7-300 digital input or output modules to selected WAGO interface modules. It supports an application involving 16 digital inputs or outputs.
The WAGO 706-2300/300-100 has a cable length of 1 m and uses conductors with a cross-sectional area of 0.14 mm², approximately equivalent to 26 AWG.
The cable is designed for Siemens SIMATIC S7-300 PLC applications involving 16 digital inputs or outputs. Compatibility with a particular PLC module must be confirmed against its connector arrangement and the corresponding WAGO system wiring documentation.
The WAGO 706-2300/300-100 is a 20-position female-to-female cable assembly with a Siemens S7-300-compatible connector at the controller end and a DIN 41651 rectangular connector at the interface end. It is intended for use with the appropriate matching PLC and WAGO interface connectors.
Yes. The WAGO 706-2300/300-100 is listed for use with selected WAGO 704 Series interface modules, including 704-5024, 704-5044 and 704-5074. The exact combination of Siemens PLC module, system cable and WAGO interface module must be checked before installation.
WAGO system cables provide dedicated connection solutions for compatible industrial PLC and interface electronics installations. The WAGO 706-2300/300-100 combines Siemens SIMATIC S7-300 compatibility, a 16-digital-signal application, preassembled 20-position connectors and a 1 m cable length to support organised industrial control cabinet wiring.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.